Linksys EA8500...main router
DD-WRT v3.0-r42366 std (02/14/20)
Linux 4.9.213 #518 SMP Thu Feb 6 03:52:58 +03 2020 armv7l
up 06:48
everything good here for me
#
Netgear WNDR3700 V4
DD-WRT v3.0-r42366 std (02/14/20)
Linux 3.18.140-d4 #69999 Fri Feb 14 09:32:29 +04 2020 mips
up 07:04
all fine here
Netgear WNR2000v3
DD-WRT v3.0-r42366 std (02/14/20)
Linux 3.10.108-d10 #38447 Fri Feb 14 09:38:57 +04 2020 mips
GUI insatll over r42353
used as a WAP + isolated guest net via br1
working very good
Netgear R7500V2 WDS STA
DD-WRT v3.0-r42366 std (2/114/20)
Linux4.9.213#518SMP
SCP/CLI wireless upgrade over 42353 no reset
All working. Thanks BrainSlayer
Wireless extension channel selections have changed since last I looked.
brainslayer has revised the 5 ghz channels and fixed a lot of errors
in the old builds i had only 6 properly working VHT80 channels and now 20 (regulatory domain germany)
Netgear R7500V2 WDS STA
DD-WRT v3.0-r42366 std (2/114/20)
Linux4.9.213#518SMP
SCP/CLI wireless upgrade over 42353 no reset
All working. Thanks BrainSlayer
i use proftpd daily with dd-wrt on my nas. it just works. since you are using proftp on opt and some other non official folders, i assume you configured proftpd by hand. so configure it right or use the standard dd-wrt way which uses /mnt/xxxx as path for storage devices. and the type of filesystem is totally irrelevant. except you are using chinese or other strange characters (kyrillic) in your filenames. then you cannot use proftpd at all on alot of filesystems which is a limitation of proftpd and very hard to fix without increasing the binary size of the ftp server alot
alot of troubles can be also solved with mount options since you likelly mounted them manually or custom. _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
r7800 latency is on par with kong builds, but the cpu usage for sirq on wifi interfaces is still broken and over 3x higher than kong builds and BS k3.18 builds.. if the r7800 was doing nat+qos, it still would be choking at these speeds from not enough cpu free.. keep the latency the same and fix the cpu usage, this will be finally 100% fixed for the first time..
kong r40720m firewall/qos/nat disabled, 5ghz sirq cpu load @ 320mbps:
core0: 15%
core1: 3%
ANY k4.x bs build firewall/qos/nat disabled, 5ghz sirq cpu load @ 320mbps:
core0: 60%
core1: 40%
still forced disabled/broken hostapd syslog output on many routers, but its fixed on r7800.. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
All good on my R7800 EXCEPT I still can't get the Samba share to show up on my MacBook ... The last this worked on MacBook was Firmware: DD-WRT v3.0-r41813 std (12/29/19 )
When I run the following command
Code:
stopservice samba3 && startservice samba3
wsdd2 : windows service discovery daemon successfully stopped
ksmbd.mountd : samba daemon successfully stopped
smbd : samba started
All working fine. _________________ Segment 1 XR700 10Gb LAN, 1Gb WAN ISP BS
Wired AP 1 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 2 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 3 Unifi Wifi 6 LR US 1Gb LAN
Syslog Services Asustor 7110T NAS 10GB
NetGear XS716T 10GB Switch
download1.dd-wrt.com/dd-wrtv2/downloads/betas/ (Brain Slayer)
YAMon https://usage-monitoring.com/index.php
Router Model Dlink DIR-825
Firmware Version DD-WRT v3.0-r42366 std (02/14/20)
Kernel Version Linux 3.10.108-d10 #38379 Fri Feb 14 07:01:04 +04 2020 mips
No run automatic Startup Command.
you have to start manually
and routing doesn't work in openvpn
Firmware Version DD-WRT v3.0-r41813 std (12/29/19)
Firmware Version DD-WRT v3.0-r41874 std (01/03/20
automatic Startup working
Firmware Version DD-WRT v3.0-r41686 std (12/10/19)
working all
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r42366 std (02/14/20)
Kernel Version Linux 4.4.213 #909 SMP Thu Feb 13 13:09:07 +04 2020 armv7l
Posted: Sat Feb 15, 2020 11:02 Post subject: TP-Link TL-WDR3600 v1 - 02-14-2020-r42366 WiFi
Router Model: TP-Link TL-WDR3600 v1
Firmware Version: DD-WRT v3.0-r42366 std (02/14/20)
Kernel Version
Linux 3.10.108-d10 #38381 Fri Feb 14 07:14:07 +04 2020 mips
Status: Ok
Reset: No
Status: Working, WiFi issue
WiFi issue
When Wireless SSID Broadcast is disabled Android device stop connecting with AP (tested on Samsung Android 9 and Huawei Android 9 - 2,4 GHz and 5GHz).
I tried to delete and add a network profile again - no luck. WPA2-PSK
Windows 10 device connect as before.
Network analyzer software run on Android sees broadcast from hidden AP.
When I change Wireless SSID Broadcast to enabled i can connect.