New Build 42335: 02-10-2020-r42335

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7245
Location: Texas, USA

PostPosted: Mon Feb 10, 2020 16:32    Post subject: New Build 42335: 02-10-2020-r42335 Reply with quote
WARNING: DO NOT flash this experimental test build unless you know the risks and recovery methods. Report here to provide important info for developers and users. Always state your hardware model & version, mode (e.g. Repeater) and SPECIFIC build (e.g. netgear-r7000-webflash). Avoid discussions and create a new thread for specific problems or questions as this thread is not for support, and posts may be deleted or moved.

Downloads: if a link does not work, try another (alternative @DD-WRT website)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2020/02-10-2020-r42335/
ftp://ftp.dd-wrt.com/betas/2020/02-10-2020-r42335/
Note: for wget (or curl) with CLI flash (`write {f/w} linux`), change the https to http, use `curl -k {link} -o {file}`, or ftp

Changelogs:
SVN* changelog since last build: 42287
Summary: (deprecated after 29739)
*Github mirror: https://github.com/mirror/dd-wrt/

Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).

Issues, observations, and/or workarounds reported:
1. DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use: 6246
2. WDS does not work on Broadcom ARM devices (only MIPS<->MIPS)
3. VAPs not working at boot fixed for unbridged VAPs with r40564:40566. Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas (there are a few alternatives to search)

Notes:
1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer
2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. PBR/UDP with SFE working again since r40513 (see 6729)
5. CAKE scheduler changes "completed" with r41057 (see 5796) & FQ_CODEL_FAST with r41027 (reset first!)
6. Reset button was broken in 40571; fixed in build 40750.
7. Radio Timer / GTK Renewal issues, syslog spam and wireless issues (BCM MIPS) fixed with r41662
8. New Broadcom build option for 8MB+ K2.x devices (limited currently):
broadcom_K3X_mipsel32r1 [BS has tested on a WRT600N v1.1]
9. CVE-2019-14899 VPN fix (r41784: applicability depends on VPN setup) and GUI toggle (r41812): ticket 6920, 6928, 6931, 6932
10. In-kernel samba now used and default min/max versions have changed, so change them if needed: 6954, 6957

Template example to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
[b][u]Router/Version: [/u][/b]
[b]Mode: [/b]
[b]File: [/b]
[b]Kernel: [/b]
[b]Status: [/b]

_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
Sponsor
twindragon6
DD-WRT User


Joined: 29 Jun 2008
Posts: 132

PostPosted: Mon Feb 10, 2020 18:44    Post subject: Netgear Nighthawk R7000 Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r42335 std (02/10/20)
Kernel: Linux 4.4.213 #888 SMP Sat Feb 8 05:29:10 +04 2020 armv7l
Mode: Gateway.
Reset: No.
Previous: 02-06-2020-r42287
Status: Working.



Logs.txt
 Description:
Logs

Download
 Filename:  Logs.txt
 Filesize:  177.2 KB
 Downloaded:  39 Time(s)

Lanchon
DD-WRT Novice


Joined: 05 Oct 2019
Posts: 7

PostPosted: Mon Feb 10, 2020 19:56    Post subject: Reply with quote
on Netgear AC1450 and Trendnet TEW811DRU
no reset
works fine


Last edited by Lanchon on Tue Feb 11, 2020 8:52; edited 1 time in total
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1594
Location: Canada

PostPosted: Mon Feb 10, 2020 20:27    Post subject: Reply with quote
Router/Version: Cisco E3000
Firmware: DD-WRT v3.0-r42335 mega (02/10/20)
Kernel: Linux 3.10.108-d10 #2192 Mon Feb 10 16:32:16 +04 2020 mips
Mode: Wireless Client (WireGuard Travel Router)
Reset: No.
Previous: r42174
Status: WL0-Client <-> WL1-AP on WireGuard (OC 533Mhz) Working

_________________
Home Network on Telus PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r44483 Std
R7000 - Wired ISP 4K IPTV Gateway - DDWRT r44483 Std

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r44483 Std
WRT610Nv1 - Client Bridge - DDWRT r33679 Mega K2.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r44483 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 411

PostPosted: Mon Feb 10, 2020 21:18    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r42335 std (02/10/20)
Kernel: Linux 4.4.213 #888 SMP Sat Feb 8 05:29:10 +04 2020 armv7l
Previous: r42287
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far

Uptime: 2hrs 34min
Temperatures: CPU 64.7 °C / WL0 46.8 °C / WL1 52.6 °C
Valeriy_tc
DD-WRT User


Joined: 03 Sep 2016
Posts: 57
Location: Ukraine

PostPosted: Mon Feb 10, 2020 23:57    Post subject: Linksys EA6400 Reply with quote
Router/Version: Linksys EA6400
File: DD-WRT v3.0-r42335 std (02/10/20)
Kernel: Linux 4.4.213 #888 SMP Sat Feb 8 05:29:10 +04 2020 armv7l
Mode: Gateway/AP
Reset: no
Status: No issues so far
wabe
DD-WRT Guru


Joined: 17 Jun 2006
Posts: 765

PostPosted: Tue Feb 11, 2020 9:44    Post subject: Reply with quote
Router/Version: Asus RT-AC68U rev C1
Firmware: DD-WRT v3.0-r42335 std (02/10/20)
Kernel: Linux 4.4.213 #888 SMP Sat Feb 8 05:29:10 +04 2020 armv7l
Mode/Status: Gateway / AP
Reset: no, flashed from command line
Issues/Errors: Working very well so far!

_________________
AC-68U rev. C1 on Build 44483
AC-68U rev. A1 on Build 44483
AC-68U rev. A1 on Build 44340
d0d0
DD-WRT Novice


Joined: 11 Aug 2019
Posts: 22

PostPosted: Tue Feb 11, 2020 12:57    Post subject: Reply with quote
Router Model: Netgear R6400v2
board_id: U12H332T20_NETGEAR
Firmware: DD-WRT v3.0-r42335 std (02/10/20)

Upgraded from: DD-WRT v3.0-r42287 std (01/28/20)
Reset: NO
Mode/Status: Gateway / working

Syslog

root@DD-WRT:~# grep -i err /var/log/messages

Code:
Jan  1 01:00:10 DD-WRT daemon.info mstpd[612]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan  1 01:00:10 DD-WRT daemon.info mstpd[612]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan  1 01:00:20 DD-WRT user.err wsdd2[1058]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Feb 11 13:51:08 DD-WRT daemon.notice openvpn[1198]: NCP: overriding user-set keysize with default
Feb 11 13:51:11 DD-WRT user.err wsdd2[1058]: Terminated received.
Pdobrien3
DD-WRT User


Joined: 12 Dec 2015
Posts: 116

PostPosted: Tue Feb 11, 2020 13:13    Post subject: Reply with quote
Router/Version: Asus RT-AC68U H/W Version B2
Mode: AP, NAS
File: asus_rt-ac68u-firmware.trx
Kernel: Linux 4.4.213 #888 SMP Sat Feb 8 05:29:10 +04 2020 armv7l
Status: Windows shares are visible using both IP and Server String but using Apple FileBrowser App errors out with "SMB: Corrupt lead byte"

Router/Version: Asus RT-AC68U H/W Version A2
Mode: AP, NAS
File: asus_rt-ac68u-firmware.trx
Kernel: Linux 4.4.208 #651 SMP Thu Jan 9 12:55:41 +04 2020 armv7l
Status: On Firmware: DD-WRT v3.0-r41954 std (01/09/20), configured Samba with Minimum/Maximum Protocol Version as NT 1.0 and my Hikvision cameras connect and work fine. As soon as I upgrade to any version higher than DD-WRT v3.0-r41954 std (01/09/20), the shares show offline. Apple FileBrowser App also errors out with "SMB: Corrupt lead byte"

Router/Version: Asus RT-AC68U H/W Version C1
Mode: AP, NAS
File: asus_rt-ac68u-firmware.trx
Kernel: Linux 4.4.208 #651 SMP Thu Jan 9 12:55:41 +04 2020 armv7l
Status: On Firmware: DD-WRT v3.0-r41954 std (01/09/20), configured Samba with Minimum/Maximum Protocol Version as NT 1.0 and my Hikvision cameras connect and work fine. As soon as I upgrade to any version higher than DD-WRT v3.0-r41954 std (01/09/20), the shares show offline. Apple FileBrowser App also errors out with "SMB: Corrupt lead byte"

Even tried to reset my configuration. Samba still shows offline
buffalo0207
DD-WRT User


Joined: 30 Apr 2014
Posts: 129
Location: UK

PostPosted: Tue Feb 11, 2020 15:18    Post subject: Reply with quote
Router/Version: Netgear R8500
Mode: AP/VPN
File: DD-WRT v3.0-r42335 std (02/10/20)
Kernel: Linux 4.4.213 #893 SMP Mon Feb 10 11:02:03 +04 2020 armv7l
Status: Working
Errors USB doesn't load

My attached USB 2.0 wont show in Services>USB.


Last edited by buffalo0207 on Tue Feb 11, 2020 15:35; edited 1 time in total
tinkeruntilitworks
Guest





PostPosted: Tue Feb 11, 2020 15:29    Post subject: Reply with quote
Router: Netgear R7000P
Kernel: Linux 4.4.213 #893 SMP Mon Feb 10 11:02:03 +04 2020 armv7l
Mode: Gateway/AP 2.4GHz 5GHz Unbound JFFS2 static leases
Status: all seems well
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 136
Location: Szczecin, Poland EU

PostPosted: Tue Feb 11, 2020 20:20    Post subject: New Build 42335: 02-10-2020-r42335 Reply with quote
Router/Version: Netgear WNR3500L v2
Mode: Internet gateway & WIFI AP
File: dd-wrt.v24-42335_NEWD-2_K3.x_mega-WNR3500Lv2
Kernel: Linux 3.10.108-d10 #2176 Mon Feb 10 16:16:08 +04 2020 mips
Status: OK
Uptime: -> 24 hrs

Router is updated via ssh. After install and reboot I have small problem with GUI. I need minor changes (change mac addresses to capital letters). After this operation I'm click to Save and then apply changes. Then I'm redirect to apply.asp point. Page was white and device totally not respond. I must unplugged device from power line to restart it. SSH and any other ideas won't working too. Other problem - I can't change any configuration in: Setup -> Switch config. After I'm make changes and I try to save that. Router back to default configuration for this module and anything wasn't changes. This problem is for a long time.
M
DD-WRT User


Joined: 29 Dec 2012
Posts: 169

PostPosted: Wed Feb 12, 2020 7:12    Post subject: KA1200 (Client Mode - Peap) Not Work since r33986 Reply with quote
Mad

Client Mode (WPA2 - Enterprise Peap Mode) does not work this broadcom firmware. The Marvell MVEBU based Hardware did not have this issues. I also tried the old method or new method with client mode connection. Both of them not working.

Asus RT-AC68U (Firmware Asus RT-AC56U)
Hardware: Kasda (KA1200)

Firmware Version: DD-WRT v3.0-r42335 std (02/10/20)
Kernel Version: Linux 4.4.213 #888 SMP Sat Feb 8 05:29:10 +04 2020 armv7l

Broadcom BCM4708
CPU Cores
1
CPU Features
EDSP
CPU Clock
800 MHz
Load Average
26%
0.26, 0.20, 0.18
Temperatures
CPU 68.0 °C / WL0 47.9 °C


Yellow - System Log
Jan 1 08:00:19 kern.warn kernel: PCI: Fixing up bus 0 domain 0
Jan 1 08:00:19 kern.warn kernel: PCI: Fixing up bus 0 domain 1
Jan 1 08:00:19 kern.warn kernel: PCI: Fixing up bus 0 domain 2
Jan 1 08:00:19 kern.warn kernel: Boot partition size = 524288(0x80000)
Jan 1 08:00:19 kern.warn kernel: lookup_nflash_rootfs_offset: offset = 0x200000 size = 0x1e00000, 0x20000
Jan 1 08:00:19 kern.warn kernel: nf_conntrack_rtsp v0.7 loading
Jan 1 08:00:19 kern.warn kernel: Spare area=64 eccbytes 8, ecc bytes located at:
Jan 1 08:00:19 kern.warn kernel: 14 15 30 31 46 47 62 63
Jan 1 08:00:19 kern.warn kernel: Available 55 bytes at (off,len):
Jan 1 08:00:19 kern.warn kernel: (1,13) (16,14) (32,14) (48,14) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
Jan 1 08:00:19 kern.warn kernel: Options: NO_SUBPAGE_WRITE,
Jan 1 08:00:19 kern.warn kernel: et: module license 'Proprietary' taints kernel.
Jan 1 08:00:19 kern.warn kernel: Disabling lock debugging due to kernel taint
Jan 1 08:00:19 kern.warn kernel: et_module_init: passivemode set to 0x0
Jan 1 08:00:19 kern.warn kernel: et_module_init: txworkq set to 0x0
Jan 1 08:00:19 kern.warn kernel: et_module_init: et_txq_thresh set to 0x400
Jan 1 08:00:19 kern.warn kernel: et_module_init: et_rxlazy_timeout set to 0x3e8
Jan 1 08:00:19 kern.warn kernel: et_module_init: et_rxlazy_framecnt set to 0x20
Jan 1 08:00:19 kern.warn kernel: et_module_init: et_rxlazy_dyn_thresh set to 0
Jan 1 08:00:19 kern.warn kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.89.21 (r524987)
Jan 1 08:00:19 kern.warn kernel: wl_module_init: passivemode set to 0x0
Jan 1 08:00:19 kern.warn kernel: wl_module_init: txworkq set to 0x0
Jan 1 08:00:19 kern.warn kernel: PCI: Enabling device 0001:01:00.0 (0140 -> 0142)
Jan 1 08:00:19 kern.warn kernel: eth1: Broadcom BCM43227 802.11 Wireless Controller 7.14.89.21 (r524987)
Jan 1 08:00:19 kern.warn kernel: eth2: Broadcom BCM4360 802.11 Wireless Controller 7.14.89.21 (r524987)
Jan 1 08:00:19 kern.warn kernel: eth0: mixed HW and IP checksum settings.
Jan 1 08:00:56 kern.warn kernel: br0: received packet on eth1 with own address as source address
Jan 1 08:04:30 daemon.warn dnsmasq[2022]: no servers found in /tmp/resolv.dnsmasq, will retry
Jan 1 08:16:26 daemon.warn dnsmasq[5940]: no servers found in /tmp/resolv.dnsmasq, will retry


Red - System Log
Jan 1 08:00:19 kern.err kernel: bcmsflash: found no supported devices



KA1200.003.jpg
 Description:
 Filesize:  133.81 KB
 Viewed:  2644 Time(s)

KA1200.003.jpg



KA1200.002.jpg
 Description:
 Filesize:  43.23 KB
 Viewed:  2644 Time(s)

KA1200.002.jpg



KA1200.001.jpg
 Description:
 Filesize:  49.54 KB
 Viewed:  2644 Time(s)

KA1200.001.jpg


al_bo
DD-WRT Novice


Joined: 22 Dec 2015
Posts: 47

PostPosted: Wed Feb 12, 2020 7:48    Post subject: Boot loop Reply with quote
Router/Version: R7000
Mode: AP
File: from 42287 to 42335
Status: bricked
I was made nvram erase before flash on 42287, flashed 42335 successful, booted, then made nvram erase again, after that R7000 goes to boot loop.
Please, provide me a quick link to debrick. Thanks.
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 3857
Location: UK, London, just across the river..

PostPosted: Wed Feb 12, 2020 8:17    Post subject: Re: Boot loop Reply with quote
al_bo wrote:
Router/Version: R7000
Mode: AP
File: from 42287 to 42335
Status: bricked
I was made nvram erase before flash on 42287, flashed 42335 successful, booted, then made nvram erase again, after that R7000 goes to boot loop.
Please, provide me a quick link to debrick. Thanks.


https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP

_________________
Atheros
TP-Link WR740Nv1 -----DD-WRT 44538 BS AP,NAT
TP-Link WR740Nv4 -----DD-WRT 44251 BS WAP/Switch
TP-Link WR1043NDv2 ---DD-WRT 44538 BS AP,NAT,AP Isolation,Firewall,Local DNS,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 ---DD-WRT 44538 BS AP,NAT,AD Block,Firewall,Local DNS,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 ---Gargoyle OS 1.12.0 AP,NAT,QoS,Quotas
Qualcomm/IPQ8065
Netgear R7800 -----DD-WRT 44538 BS AP,NAT,AD-Block,AP&Net Isolation,VLAN's,Firewall,Local DNS,DoT
Broadcom
Netgear R7000 -----DD-WRT 44538 BS AP,Wi-Fi OFF,NAT,AD-Block,Firewall,Local DNS,Forced DNS,DoT,VPN
-----------------------------------------------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 by mac913
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum