Joined: 23 Jan 2020
|Posted: Thu Jan 23, 2020 19:59 Post subject: VAP to VPN config issue
|Good day all. been ready the forum and all sorts of write ups on how to setup a Virtual AP and tie that to a VPN, so regular connections go out the regular internet but anything connected to the VAP goes out the VPN.. ok so the device is configured and working using the regular Wifi and VPN. however, anything on the VAP does not get to the internet. so. down to the nitty gritty.. this is a Linksys WRT3200ACM.. using DD-WRT v3.0-r40559 std.
VAP is setup on ATH2.1 with an ssid of VPN1..
Net Isolation enabled
Forced DNS Redirection Enables.
Optional DNS target set to 184.108.40.206
IP Address 10.5.0.0
in Networking i have a DHCP server supplying address to ATH2.1..
in the VPN PBR i have added 10.5.0.0/24
there is no extra BR interfaces other than br0 which is the default.
so.. everything i try laptop, cell, tablet all connect fine to VPN1.. they get an IP in the correct range.. however they do not have internet. the table and cell say connected without internet. and thats where im stuck.. am i missing some sort of routing ?
i can confirm that if i connect to it using any WIFI other than VPN1... it goes out the plain internet which is what i want.. any help would be highly appreciated. i tried adding some screen shots but can seem to get them uploaded.