New Build 41954: 01-09-2020-r41954

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 8115
Location: Texas, USA

PostPosted: Thu Jan 09, 2020 20:31    Post subject: New Build 41954: 01-09-2020-r41954 Reply with quote
Downloads: (if a link does not work, try another)

https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2020/01-09-2020-r41954/

ftp://ftp.dd-wrt.com/betas/2020/01-09-2020-r41954/

Alternate link: DD-WRT website
Note: for wget (or curl) with CLI flash (`write {f/w} linux`), change the https to http, use `curl -k {link} -o {file}`, or ftp

Changelogs:
SVN* changelog since last build: 41892
Summary: (deprecated after 29739)
*Github mirror: https://github.com/mirror/dd-wrt/

Notes:
1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer
2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. PBR/UDP with SFE working again since r40513 (see 6729)
5. CAKE scheduler changes "completed" with r41057 (see 5796) & FQ_CODEL_FAST with r41027 (reset first!)
6. Reset button was broken in 40571; fixed in build 40750.
7. New Broadcom build option for 8MB+ K2.x devices (limited currently):
broadcom_K3X_mipsel32r1 [BS has tested on a WRT600N v1.1]

Issues, observations, and/or workarounds reported:
1. Trendnet 81*DRU models are missing factory-to-flash
2. DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use: 6246
3. WDS does not work on Broadcom ARM devices (only MIPS<->MIPS)
4. VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
This appears fixed (only for unbridged VAPs?) with r40564:40566...
5. Radio Timer / GTK Renewal issues, syslog spam and wireless issues (BCM MIPS):
This may finally be fixed with r41663

Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).

Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
[u][b]Router/Version:[/b][/u]
[b]Mode:[/b]
[b]File: [/b]
[b]Kernel: [/b]
[b]Status: [/b]

WARNING: This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build.

_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
Sponsor
twindragon6
DD-WRT User


Joined: 29 Jun 2008
Posts: 163

PostPosted: Thu Jan 09, 2020 20:53    Post subject: Netgear Nighthawk R7000 Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r41954 std (01/09/20)
Kernel: Linux 4.4.208 #651 SMP Thu Jan 9 12:55:41 +04 2020 armv7l
Mode: Gateway
Reset: No
Previous: 01-05-2020-r41892
Status: Working, the Syslog is glitchy so I captured what I could in the log. It clears itself and spams with
Jan 9 13:50:55 R7000 daemon.info dnscrypt-proxy[1792]: Refetching server certificates
and connection status



Logs.txt
 Description:
Logs

Download
 Filename:  Logs.txt
 Filesize:  191.04 KB
 Downloaded:  109 Time(s)

turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 189
Location: Maine, USA

PostPosted: Thu Jan 09, 2020 22:18    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-41954_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r41954 mega (01/09/20)
Kernel: Linux 3.10.108-d8 #1440 Thu Jan 9 18:56:04 +04 2020 mips
Mode: AP/USB
Previous: r41892
Reset?: N
Status: Working

Router/Version: Asus RT-N12D
File: dd-wrt.v24-41954_NEWD-2_K3.x_mega.bin
Firmware: DD-WRT v3.0-r41954 mega (01/09/20)
Kernel: Linux 3.10.108-d8 #1440 Thu Jan 9 18:56:04 +04 2020 mips
Mode: Router/OpenVPN client
Previous: r41892
Reset?: N
Status: Working

Router/Version: Linksys E2500 V3
File: dd-wrt.v24-41954_NEWD-2_K3.x_mega-e2500.bin
Firmware: DD-WRT v3.0-r41954 mega (01/09/20)
Kernel: Linux 3.10.108-d8 #1440 Thu Jan 9 18:56:04 +04 2020 mips
Mode: Router/USB
Previous: r41892
Reset?: N
Status: Working

Flashed from gui. Syslogs clean. Up one hour.

Did not update the "Asus WL-500G Premium v2" as it appears dd-wrt.v24_mega_generic.bin is still version r41813, not r41954.
amadeus
DD-WRT Novice


Joined: 06 Nov 2019
Posts: 29

PostPosted: Thu Jan 09, 2020 22:28    Post subject: Reply with quote
Router/Version: Netgear R6700v3
Firmware: DD-WRT v3.0-r41954 std (01/09/20)
Kernel: Linux 4.4.208 #651 SMP Thu Jan 9 12:55:41 +04 2020 armv7l
Previous: r41892
Mode/Status: AP / working
Reset: N
Issues/Errors: Working well so far. Syslogs clean.

Uptime: 41 min
Temperatures: CPU 68.6 °C / WL0 46.4 °C / WL1 49.5 °C
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 453

PostPosted: Fri Jan 10, 2020 4:36    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r41954 std (01/09/20)
Kernel: Linux 4.4.208 #651 SMP Thu Jan 9 12:55:41 +04 2020 armv7l
Previous: r41892
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.

Uptime: 23min
Temperatures: CPU 64.1 °C / WL0 46.3 °C / WL1 52.5 °C
tinkeruntilitworks
Guest





PostPosted: Fri Jan 10, 2020 16:35    Post subject: Reply with quote
Router: Netgear R7000P
Kernel: Linux 4.4.208 #656 SMP Thu Jan 9 13:39:37 +04 2020 armv7l
Mode: Gateway/AP 2.4GHz 5GHz IPv6 static leases Unbound JFFS2
Status: all seems well

*
just in case someone else doesn't know

new versions of android have a privacy feature that spoofs your mac address. you have to turn it off manually. with my setup it was causing disconnect issues. might be unique to unbound though.


Last edited by tinkeruntilitworks on Sun Jan 12, 2020 19:24; edited 2 times in total
chaosengine
DD-WRT Novice


Joined: 30 Apr 2012
Posts: 18

PostPosted: Sat Jan 11, 2020 10:52    Post subject: Reply with quote
Router/Version: Netgear R6400
Firmware: DD-WRT v3.0-r41954 std (01/09/20)
Kernel: Linux 4.4.208 #651 SMP Thu Jan 9 12:55:41 +04 2020 armv7l
Previous: r41586/
Mode/Status: Gateway Access Point / working
Reset: no
Issues/Errors: Working aok

Uptime: 1hour
Temperatures: CPU 52.5 °C / WL0 36.1 °C

Just setup as a simple access point, no dhcp etc. 2.4ghz only.
decompiled
DD-WRT User


Joined: 02 Jan 2008
Posts: 78

PostPosted: Sat Jan 11, 2020 14:45    Post subject: Reply with quote
Router/Version: R7000
Firmware: DD-WRT v3.0-r41954 std (01/09/20)
Kernel: Linux 4.4.208 #651 SMP Thu Jan 9 12:55:41 +04 2020 armv7l
Reset: no
Issues/Errors: New Error

After about 2 days the web ui became unresponsive and had to power cycle. Will continue to monitor.


Last edited by decompiled on Sun Jan 12, 2020 14:14; edited 1 time in total
DP_
DD-WRT Novice


Joined: 11 Jan 2020
Posts: 1

PostPosted: Sat Jan 11, 2020 20:16    Post subject: Asus RT-AC66U Reply with quote
Router/Version: Asus RT-AC66U
File: dd-wrt-41954-Asus_RT-AC66U.trx
Firmware: DD-WRT v3.0-r41954 giga (01/09/20)
Kernel: Linux 3.10.108-d8 #1424 Thu Jan 9 18:40:22 +04 2020 mips
Mode: AP/USB Printer/OpenVPN
Previous: r41771
Reset?: N
Status:
1) WiFi doesn’t work correctly for both frequency bands. This issue presents on the all releases after r41771. Client gets IP from default net 192.168.1.0/24 with gateway 192.168.1.1 while the router has another configuration 192.168.2.0/24. There are no configured VAPs. There are no fake net 192.168.1.0/24 in routing table of the router.
Wired connections work fine.

2) There are errors refer to JFFS2 (see attached logs). Clean Internal Flash Storage didn’t fix it. These errors are also present at r41771.
Router has been flashed back to r41771. WiFi works.



messages.txt
 Description:
cat /var/log/messages

Download
 Filename:  messages.txt
 Filesize:  83.25 KB
 Downloaded:  69 Time(s)


dmesg.txt
 Description:
dmesg

Download
 Filename:  dmesg.txt
 Filesize:  45.18 KB
 Downloaded:  78 Time(s)

WouldRatherBeFOSS
DD-WRT User


Joined: 09 Nov 2019
Posts: 93

PostPosted: Sat Jan 11, 2020 22:34    Post subject: Reply with quote
Router/Version Asus RT-AC66U
File / firmware DD-WRT v3.0-r41954 giga (01/09/20)
Kernel: [as I have said before, I don't understand this field. Do you want the Linux kernel the build is running? Well, it's the kernel bundled with the build.]
Mode: AP
Previous build: 41892
Reset?: N
Status: working

How strictly must we adhere to the template above? Does any script scrape that data (necessitating strictness)?

_________________
My router: Asus RT-AC66U

Operating systems on devices that I use with that router: GNU-Linux; Windows 10; Android Lollipop
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 453

PostPosted: Sat Jan 11, 2020 23:31    Post subject: Re: Asus RT-AC66U Reply with quote
DP_ wrote:
1) WiFi doesn’t work correctly for both frequency bands. This issue presents on the all releases after r41771. Client gets IP from default net 192.168.1.0/24 with gateway 192.168.1.1 while the router has another configuration 192.168.2.0/24. There are no configured VAPs. There are no fake net 192.168.1.0/24 in routing table of the router.
Wired connections work fine.


Sounds suspiciously like your client devices are negotiating their WiFi connection with another device... perhaps your ISP's gateway was left as a router & WiFi access point (rather than flipped to bridge mode).

If you rule that out, I'd suggest wiping your DD-WRT config and starting fresh (manually, not from a back-up).
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 453

PostPosted: Sat Jan 11, 2020 23:36    Post subject: Reply with quote
WouldRatherBeFOSS wrote:
How strictly must we adhere to the template above? Does any script scrape that data (necessitating strictness)?


No scripts, but suggest keeping it fairly consistent with the template so others can easily follow along. Nobody will really care if you deviate, but it may reduce the usefulness of your contributions if they lack the requested details.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 8115
Location: Texas, USA

PostPosted: Sun Jan 12, 2020 0:50    Post subject: Reply with quote
The kernel version is printed on the router status page, or, you can telnet/ssh in and do a `uname -srv`; copy and paste that ....
_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
technoside2
DD-WRT User


Joined: 25 Oct 2018
Posts: 64

PostPosted: Sun Jan 12, 2020 4:53    Post subject: EA6350 V2 Reply with quote
Router/Version: Linksys WRT54G2 / GS2
File: dd-wrt.v24_micro_generic.bin
Firmware: DD-WRT v3.0-r41954 micro (01/09/20)
Kernel: Linux 2.4.37 #58095 Thu Jan 9 11:34:39 +04 2020 mips
Mode: AP
Reset?: N
Status: Working


Router/Version: Linksys EA6350 v2
File: linksys-ea6350-webflash.bin
Firmware: DD-WRT v3.0-r41954 std (01/09/20)
Kernel: Linux 4.4.208 #651 SMP Thu Jan 9 12:55:41 +04 2020 armv7l
Mode: Router/AP
Reset?: N
Status: Working

_________________
WRT54GL v1.1 - Flashed
Linksys WRT54G2 v1 - Flashed
EA6350 v2 - Flashed
RageX
DD-WRT Novice


Joined: 01 Jan 2020
Posts: 36

PostPosted: Sun Jan 12, 2020 7:39    Post subject: Reply with quote
Router/Version: D-Link DIR-890L A1
File: dir890-webflash.bin
Firmware: DD-WRT v3.0-r41954 std (01/09/20)
Kernel: Linux 4.4.208 #656 SMP Thu Jan 9 13:39:37 +04 2020 armv7l
Mode: Router/AP
Previous: r41811
Temperatures: CPU 63.6 °C / WL0 48.7 °C / WL1 44.0 °C

Status:

Firmware update was done according to Peacock FAQ thread.

First Issue

Syslog has been getting spammed by the following entry:

Code:
Jan 12 17:36:35 DIR-890L kernel CONSOLE: 007859.341 wl1: wlc_bmac_processpmq: skip entry with mc/bc address 2d:a9:f0:a5:3b:01
Jan 12 17:36:35 DIR-890L kernel CONSOLE: 007859.355 wl1: wlc_bmac_processpmq: skip entry with mc/bc address 2d:a9:f0:a5:3b:01
Jan 12 17:38:32 DIR-890L kernel CONSOLE: 007976.152 wl1: wlc_bmac_processpmq: skip entry with mc/bc address 2d:a9:f0:a5:3b:01
Jan 12 17:41:02 DIR-890L kernel CONSOLE: 008126.782 wl1: wlc_bmac_processpmq: skip entry with mc/bc address 2d:a9:f0:a5:3b:01
Jan 12 17:44:03 DIR-890L kernel CONSOLE: 008308.028 wl1: wlc_bmac_processpmq: skip entry with mc/bc address 2d:a9:f0:a5:3b:01
Jan 12 17:44:03 DIR-890L kernel CONSOLE: 008308.061 wl1: wlc_bmac_processpmq: skip entry with mc/bc address 2d:a9:f0:a5:3b:01


The cited MAC address is a non-existent address, but it is one digit off the MAC address of an Android phone connected to the network. Basically the phone has this MAC address: 2c:a9:f0:a5:3b:01. Syslog spam only occurs when said Android phone is connected to network.

Same issue was present in r41811.

This is the reason I actually decided to update firmware. Any ideas as to what could be causing this strange non-existent MAC address spamming the logs? Basically 2-3 entries per minute.

Second Issue

Router rebooted by itself after a couple of hours. Syslogs are as follows:

Code:
Jan 12 17:44:49 DIR-890L kernel CONSOLE: 008354.504 
Jan 12 17:44:49 DIR-890L kernel CONSOLE: FWID 01-7c77e6bc
Jan 12 17:44:49 DIR-890L kernel CONSOLE: flags 110005
Jan 12 17:44:49 DIR-890L kernel CONSOLE: 008354.504 
Jan 12 17:44:49 DIR-890L kernel CONSOLE: TRAP 7(26fea8): pc 1871b8, lr 1867e9, sp 26ff00, cpsr 600001df, spsr 600001bf
Jan 12 17:44:49 DIR-890L kernel CONSOLE: 008354.504   r0 a000000, r1 a0000000, r2 40000000, r3 25f2dc, r4 1ffb98, r5 26af20, r6 25f2d4
Jan 12 17:44:49 DIR-890L kernel CONSOLE: 008354.504   r7 25eaa4, r8 25f2dc, r9 0, r10 4d278200, r11 84140020, r12 59d9080
Jan 12 17:44:49 DIR-890L kernel CONSOLE: 008354.504 
Jan 12 17:44:49 DIR-890L kernel CONSOLE:    sp+0 00000000 0026af20 00000000 0018861d
Jan 12 17:44:49 DIR-890L kernel CONSOLE: 008354.504   sp+10 00000000 0025f3c0 00000000 0018078c
Jan 12 17:44:49 DIR-890L kernel CONSOLE: 
Jan 12 17:44:49 DIR-890L kernel CONSOLE: 008354.504 sp+c 0018861d
Jan 12 17:44:49 DIR-890L kernel CONSOLE: 008354.504 sp+2c 00006fc7


No other issues to report at the moment.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum