Beta Build 41517: 11-11-2019-r41517

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3, 4  Next
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 6860
Location: Texas, USA

PostPosted: Mon Nov 11, 2019 20:36    Post subject: Beta Build 41517: 11-11-2019-r41517 Reply with quote
Downloads: (if a link does not work, try another)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/11-11-2019-r41517/
ftp://ftp.dd-wrt.com/betas/2019/11-11-2019-r41517/
Alternate link: DD-WRT website
Note: for wget (or curl) with CLI flash (`write {f/w} linux`), change the https to http, use `curl -k {link} -o {file}`, or ftp

Changelogs:
SVN* changelog since last build: 41491
Summary: (deprecated after 29739)
*Github mirror: https://github.com/mirror/dd-wrt/

Notes:
1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer
2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. PBR/UDP with SFE working again since r40513 (see 6729)
5. CAKE scheduler changes "completed" with r41057 (see 5796) & FQ_CODEL_FAST with r41027 (reset first!)
6. Reset button was broken in 40571; fixed in build 40750.
7. New Broadcom build option for 8MB+ K2.x devices (limited currently):
broadcom_K3X_mipsel32r1 [BS has tested on a WRT600N v1.1]

Issues, observations, and/or workarounds reported:
1. Trendnet 81*DRU models are missing factory-to-flash
2. DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use: 6246
3. WDS does not work on Broadcom ARM devices (only MIPS<->MIPS)
4. K2.6 builds are broken since 38253(?) (GUI issues): 6538
5. VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
This appears fixed (only for unbridged VAPs?) with r40564:40566...

Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).

Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
[b]Router/Version: [/b]
[b]Mode: [/b]
[b]File: [/b]
[b]Kernel: [/b]
[b]Status: [/b]

WARNING: This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build.

_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 6860
Location: Texas, USA

PostPosted: Mon Nov 11, 2019 21:17    Post subject: Reply with quote
Sitting this one out. Most of the commits were for Qualcomm / Atheros, and the only Broadcom stuff looks like it was for ARM.
_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 157
Location: Maine, USA

PostPosted: Mon Nov 11, 2019 21:19    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-41517_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r41517 mega (11/11/19)
Kernel: Linux 3.10.108-d8 #312 Mon Nov 11 13:28:12 +04 2019 mips
Mode: AP/USB
Previous: r41491
Reset?: N
Status: Working

Router/Version: Asus RT-N12D
File: dd-wrt.v24-41517_NEWD-2_K3.x_mega.bin
Firmware: DD-WRT v3.0-r41517 mega (11/11/19)
Kernel: Linux 3.10.108-d8 #312 Mon Nov 11 13:28:12 +04 2019 mips
Mode: Router/OpenVPN client
Previous: r41491
Reset?: N
Status: Working

Router/Version: Asus WL-500G Premium v2
File: dd-wrt.v24_mega_generic.bin
Firmware: DD-WRT v3.0-r41517 mega (11/11/19)
Kernel: Linux 2.4.37 #56959 Mon Nov 11 06:36:38 +04 2019 mips
Mode: Router/USB
Previous: r41491
Reset?: N
Status: Working

Flashed from gui. Syslogs clean. Up 60 minutes. We'll see if dd-wrt.v24-41491_NEWD-2_K3.x_mega* still has rekey issue as in previous versions.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 6860
Location: Texas, USA

PostPosted: Mon Nov 11, 2019 21:22    Post subject: Reply with quote
turbowells wrote:

Flashed from gui. Syslogs clean. Up 60 minutes. We'll see if dd-wrt.v24-41491_NEWD-2_K3.x_mega* still has rekey issue as in previous versions.


Let us know if the re-key issue with the log spam is still happening. I haven't tested it in a while.

_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 157
Location: Maine, USA

PostPosted: Mon Nov 11, 2019 22:01    Post subject: Reply with quote
kernel-panic69 wrote:
Let us know if the re-key issue with the log spam is still happening. I haven't tested it in a while.


Definitely in r41468. Not just spam imo, wireless becomes unreliable.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 6860
Location: Texas, USA

PostPosted: Mon Nov 11, 2019 23:28    Post subject: Reply with quote
turbowells wrote:
kernel-panic69 wrote:
Let us know if the re-key issue with the log spam is still happening. I haven't tested it in a while.


Definitely in r41468. Not just spam imo, wireless becomes unreliable.


So much for the cron fix possibly fixing the radio timer issue. Guess I need to find that ticket and re-open it again.

_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 398

PostPosted: Tue Nov 12, 2019 0:25    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r41517 std (11/11/19)
Kernel: Linux 4.4.200 #238 SMP Mon Nov 11 01:36:10 +04 2019 armv7l
Previous: r41491
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.

Uptime: 18min
Temperatures: CPU 66.4 °C / WL0 47.0 °C / WL1 53.0 °C
tinkeruntilitworks
DD-WRT User


Joined: 21 May 2019
Posts: 272

PostPosted: Tue Nov 12, 2019 0:43    Post subject: Reply with quote
Router: Netgear R7000P
Kernel: Linux 4.4.200 #243 SMP Mon Nov 11 08:49:29 +04 2019 armv7l
Mode: Gateway / AP / JFFS2 enabled / Unbound
Status: up 4 hrs all seems well
rkboni
DD-WRT Novice


Joined: 04 Mar 2016
Posts: 49

PostPosted: Tue Nov 12, 2019 2:54    Post subject: TP-Link Archer C9v1 Reply with quote
Router/Version: TP-Link Archer C9v1
Mode: Router/AP
File: archer-c9v1-webflash.bin
Kernel: Linux 4.4.200 #240 SMP Mon Nov 11 08:30:57 +04 2019 armv7l
Previous: : r41174
Status: Up ~ 90mins, working fine.

Only gotcha noted thus far was that the Speedcheck Wifi speed test never kicked off, it was stuck in "Preparing".

Note that I was having issues with r41174 causing devices to randomly drop off the network in areas of weaker signal (but where they were previously fine) after ~ 30 days of uptime. Will see if this is any better.
SinCalChewy
DD-WRT User


Joined: 09 Nov 2014
Posts: 307
Location: Bakersfield, CA

PostPosted: Tue Nov 12, 2019 3:07    Post subject: Reply with quote
Router/Version: 3x Netgear R7000
Mode: 1x Gateway, 1x Basic AP, 1x Client Bridge
Firmware: DD-WRT v3.0-r41517 std (11/11/19)
Previous: DD-WRT v3.0-r41468 std (11/06/19)
Kernel: Linux 4.4.200 #238 SMP Mon Nov 11 01:36:10 +04 2019 armv7l
Status: Seems good to go! Many thanks, devs.

Router/Version: 2x Linksys E3000
Mode: 2x Basic Client Bridge
Firmware: dd-wrt.v24-41517_NEWD-2_K3.x_mega-e3000.bin
Previous: dd-wrt.v24-41468_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.108-d8 #312 Mon Nov 11 13:28:12 +04 2019 mips
Status: Seems legit so far :)

_________________

Deployed Routers:
Netgear R7000 - 3x build 43171M (Gateway: DoT/DoH, CAKE QoS, USB /w Entware)
Linksys E3000 - 2x build 43171M (Client Bridges)

Spares/Backups/Collection:
Too many to list. I have old routers, bricked routers, weird routers. You name it.
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 121
Location: Szczecin, Poland EU

PostPosted: Tue Nov 12, 2019 11:14    Post subject: Beta Build 41517: 11-11-2019-r41517 Reply with quote
Router/Version: Netgear WNR3500L v2
Mode: Internet gateway and WIFI AP
File: dd-wrt.v24-41517_NEWD-2_K3.x_mega-WNR3500Lv2.chk
Kernel: Linux 3.10.108-d8 #296 Mon Nov 11 13:14:45 +04 2019 mips
Status: Working

Device is updated via ssh. Generally router is fully functional and usable. Many warnings and debug events in log. Described that in other subject: #322019
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 298

PostPosted: Tue Nov 12, 2019 20:22    Post subject: Reply with quote
Updated via CLI. No issues. All features working as expected, including restoring settings backup via GUI.
_________________
Netgear R9000 X10
DD-WRT v3.0-r44048 std (08/02/20)
Gateway, AP
DNSMasq, SmartDNS, Local DNS
IPv4 & IPv6 (Prefix Delegation)
CloudFlare
No QoS
Static Leases & DHCP
2.4GHz: 3 (2422 MHz HT20)
5GHz: 100 + 106 (5500 MHz VHT80)
Xfinity 1Gbps(max)/42Mbps
Veritech
DD-WRT User


Joined: 02 Jan 2007
Posts: 180

PostPosted: Wed Nov 13, 2019 6:15    Post subject: WRT54GSv1 WNDR4500v2 RT-N66R Reply with quote
Router/Version: WRT54GSv1
Mode: AP (WAN assigned to switch)
File: DD-WRT v3.0-r41517 mega (11/11/19)
Kernel: Linux 2.4.37 #56959 Mon Nov 11 06:36:38 +04 2019 mips
Status: Working
Uptime: 1 day, 5:57
Temps: Not Supported
Previous: 41491

Router/Version: WNDR4500v2
Mode: AP (WAN assigned to switch)
File: DD-WRT v3.0-r41517 giga (11/11/19)
Kernel: Linux 3.10.108-d8 #296 Mon Nov 11 13:14:45 +04 2019 mips
Status: Working with complete reset
Uptime: 1 day, 2:47
Temps: WL0 41.4 °C / WL1 44.1 °C
Previous: 41491

Router/Version: RT-N66R
Mode: AP (WAN assigned to switch)
File: DD-WRT v3.0-r41517 big (11/11/19)
Kernel: Linux 3.10.108-d8 #308 Mon Nov 11 13:24:30 +04 2019 mips
Status: Working
Uptime: 1 day, 5:52
Temps: WL0 53.2 °C / WL1 51.9 °C
Previous: 41491

The WNDR4500v2 is being bricked again from the last two builds 41468 and 41491. This required a TFTP restore and complete reset of all settings. I did not restore any config back up this time to test. One oddity was after flashing from Netgear stock to DD-WRT then doing a 30-30-30 the router locked up with in 20 min of applying the simple config I run for testing. One power cycle later and it has been up since. Both the WRT54GS and RT-N66R did not require resets. I did replace the thermal pads in the RT-N66R with some good thermal grease and temps remain the same but the case is hotter than before so that would dictate better thermal transfer going forward (going over adding a blower style fan to aide in cooling, haven't done the measurements yet to see if there is enough space).
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 5894
Location: Netherlands

PostPosted: Wed Nov 13, 2019 8:25    Post subject: Reply with quote
Router Model: Netgear R6400v1

Firmware Version: DD-WRT v3.0-r41517 std (11/11/19)
Kernel Version: Linux 4.4.200 #238 SMP Mon Nov 11 01:36:10 +04 2019 armv7l

Upgraded from: DD-WRT v3.0-r41468 std (11/06/19)
Reset: Yes, this time I did: nvram erase && reboot and put settings in manually (it was a long ago I did this)

Status: Up and running for 48 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, DynDNS, 2.4 GHz and 5 GHz

Errors: No

Big Thanks to BrainSlayer

_________________
Routers:Netgear R7800, Netgear R6400v1, Netgear R6400v2, Linksys EA6900 (XvortexCFE), Linksys E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 157
Location: Maine, USA

PostPosted: Wed Nov 13, 2019 23:40    Post subject: Reply with quote
kernel-panic69 wrote:
Let us know if the re-key issue with the log spam is still happening. I haven't tested it in a while.


Took over two days this time on the RT-N66U...

Code:

root@AccessPoint2:~# cat /proc/version
Linux version 3.10.108-d8 (root@linux) (gcc version 9.2.0 (OpenWrt GCC 9.2.0 r10890-7d542dc804) ) #312 Mon Nov 11 13:28:12 +04 2019
root@AccessPoint2:~#  nvram show | grep os_version
size: 30147 bytes (35389 left)
os_version=41517
root@AccessPoint2:~#  tail /var/log/messages
Nov 13 18:33:51 AccessPoint2 user.info : timer : #1080 (0x4361e0)->0x435b80:    0 sec 988711 usec       0x404564
Nov 13 18:33:51 AccessPoint2 user.info : timer : #1081 (0x435b80)->0x435540:    0 sec 0 usec    0x404564
Nov 13 18:33:51 AccessPoint2 user.info : timer : #1082 (0x435540)->0x434e20:    0 sec 0 usec    0x404564
Nov 13 18:33:51 AccessPoint2 user.info : timer : #1083 (0x434e20)->0x434e80:    0 sec 0 usec    0x404564
Nov 13 18:33:51 AccessPoint2 user.info : timer : #1084 (0x434e80)->0x4349c0:    0 sec 337 usec  0x404564
Nov 13 18:33:51 AccessPoint2 user.info : timer : #1085 (0x4349c0)->0x436200:    0 sec 475 usec  0x404564
Nov 13 18:33:51 AccessPoint2 user.info : timer : #1086 (0x436200)->0x0:         0 sec 988291 usec       0x404564
Nov 13 18:33:51 AccessPoint2 user.info : timer : eventlist is full
Goto page 1, 2, 3, 4  Next Display posts from previous:    Page 1 of 4
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum