Revert back to stock

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
Coyote1Abe
DD-WRT Novice


Joined: 10 Apr 2019
Posts: 4

PostPosted: Sun Aug 11, 2019 19:47    Post subject: Revert back to stock Reply with quote
Why have we no revert back image for the WRT ACM3200?
Sponsor
SurprisedItWorks
DD-WRT Guru


Joined: 04 Aug 2018
Posts: 947
Location: Appalachian mountains, USA

PostPosted: Sun Aug 11, 2019 20:10    Post subject: Reply with quote
https://www.linksys.com/us/support-article?articleNum=207552

I don't know whether the WRT3200ACM has any special needs (like the WRT32X, apparently) regarding reverting to stock, but it may be as simple as using the file linksys provides at that link in the GUI>Administration>Upgrade process.

Does anyone know?

_________________
Five WRT1900ACSv2's on 42926, 44048.
VLANs, multiple VAPs, NAS, client-mode travel router, OpenVPN client (AirVPN), DDNS, wireguard server, two wireguard clients (AzireVPN), use of two DNSCrypt DNS providers (inc Quad9) through OpenVPN and wireguard clients.
WENED
DD-WRT Guru


Joined: 30 May 2017
Posts: 514
Location: Rural Manitoba

PostPosted: Mon Aug 12, 2019 4:19    Post subject: Reply with quote
SurprisedItWorks wrote:
https://www.linksys.com/us/support-article?articleNum=207552

I don't know whether the WRT3200ACM has any special needs (like the WRT32X, apparently) regarding reverting to stock, but it may be as simple as using the file linksys provides at that link in the GUI>Administration>Upgrade process.

Does anyone know?


I have had to revert my 3200's back a couple of times and you are right on with the procedure, nothing special just use the linksys firmware and update.

_________________
WRT3200acm Master WDS 5GHz 80Mhz CH 36 (+6) r44538
Ath1 2.4Ghz Disabled
99 Static Leases

WRT3200acm r44538 WDS Station 5Ghz
Ath1 AP N/G Mixed Channel 11 HT40

WRT1900Ac V1 5Ghz r44538 WDS Station
(Defective, no 2.4Ghz but 5Ghz works great)

WRT1900AC V1 5Ghz AC 80Mhz WDS Station r44048
2.4Ghz AP Ch1 HT20 Mixed

(SPARE)WRT1900AC V1 r44048 On LAN
5Ghz WDS AP Ch149(+6) 80Mghz
2.4Ghz Ch 6 20Mhz N/G Mixed

WRT1200AC V1 r44048 LAN
2.4Ghz 20Mhz Ch 6 Mixed
5 Ghz 80Mhz Ch 149 (UUU+6) WDS AP

WRT54G DD-WRT v3.0-r37305 micro AP CH 6 Mixed - Not in use

EX6200 DD-WRT r38535 - Spare
EX7000 Stock Firmware Spare
Devices and Cameras and Sensors
15 WiFi cameras, 4 desktops, 2 laptop, 12 Sonoff Basic/TH16, Artisan 700 Printer, Ongoing testing of other devices.
Coyote1Abe
DD-WRT Novice


Joined: 10 Apr 2019
Posts: 4

PostPosted: Tue Aug 13, 2019 17:28    Post subject: Thanks for the update Reply with quote
Greatly appreciate your guidance

Abe
ruprect
DD-WRT Novice


Joined: 29 Sep 2016
Posts: 16

PostPosted: Wed Aug 28, 2019 2:04    Post subject: Reply with quote
Is this the same for the 1900ACS ?

https://www.linksys.com/us/support-article?articleNum=165487

Just apply the official firmware in the DD-WRT upgrade firmware section ?
ATHF
DD-WRT Guru


Joined: 14 Dec 2015
Posts: 728
Location: 127.0.0.1

PostPosted: Wed Aug 28, 2019 6:07    Post subject: Reply with quote
ruprect wrote:
Is this the same for the 1900ACS ?

https://www.linksys.com/us/support-article?articleNum=165487

Just apply the official firmware in the DD-WRT upgrade firmware section ?


It should work the same way, BS was able to code it in to be able to go back just by using the stock firmware.
If not, there is (or maybe was backup site with <Kong>'s revert to stock files, can't remember if he made one for the ACS though), I can't remember the sites URL but I know someone on here remembers.

_________________
Tutorial for flashing WRT series
WRT Installation,Upgrade & Basic Setup–Cliff Notes
DD-WRT Firmware: r42054: WRT3200ACM, WRT1200ACv1 (Smart crap subnet), WRT1900ACv1
Velop:3 WHW0101, RE6500, RE9000(AP)
TWC/Spectrum - 300/25
SysLog Watcher 5, Security Onion on Virtual Box, Fingboxes, PiHoles
ttowling
DD-WRT User


Joined: 01 Mar 2019
Posts: 130

PostPosted: Fri Dec 13, 2019 9:50    Post subject: Reply with quote
ATHF wrote:
ruprect wrote:
Is this the same for the 1900ACS ?

https://www.linksys.com/us/support-article?articleNum=165487

Just apply the official firmware in the DD-WRT upgrade firmware section ?


It should work the same way, BS was able to code it in to be able to go back just by using the stock firmware.
If not, there is (or maybe was backup site with <Kong>'s revert to stock files, can't remember if he made one for the ACS though), I can't remember the sites URL but I know someone on here remembers.


Apologies for the bump - but is this confirmed as working? I need to revert my WRT1900ACS V2 and want to know if all I need is the latest Linksys stock firmware for that? (as below)

https://downloads.linksys.com/downloads/firmware/FW_WRT1900ACSV2_2.0.2.188405_prod.img
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 1608

PostPosted: Sat Dec 14, 2019 16:58    Post subject: Reply with quote
Well, you do have two partitions. I say go for it. You have a USB to TTL serial cable such as Adafruit 954? Factory firmware can be flashed via u-boot environment and TFTP with that cable.
ttowling
DD-WRT User


Joined: 01 Mar 2019
Posts: 130

PostPosted: Sat Dec 14, 2019 20:31    Post subject: Reply with quote
blkt wrote:
Well, you do have two partitions. I say go for it. You have a USB to TTL serial cable such as Adafruit 954? Factory firmware can be flashed via u-boot environment and TFTP with that cable.


I don't have a serial cable.. I thought I had read that DD supported easy flashing of stock but maybe I imagined it.
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 1608

PostPosted: Sat Dec 14, 2019 20:40    Post subject: Reply with quote
I know WRT3200ACM has this ability so you didn't imagine it, but I don't have a 1900 series to test. It should work.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum