UBNT Rocket M Radio - NO Link

Post new topic   Reply to topic    DD-WRT Forum Index -> Ubiquiti Devices
View previous topic :: View next topic  
Author Message
Cable Guy
DD-WRT Novice


Joined: 22 Sep 2012
Posts: 2
PostPosted: Thu Feb 16, 2023 17:57    Post subject: UBNT Rocket M Radio - NO Link Reply with quote
I have a pair of Rocket M radios, bought the Pro licenses, activated them

No RF link between them

One is setup as a simple AP with an SSID and a channel specified

The other is a Client with the same SSID and channel

No Connection between them, the signal LEDs on the radios don't light up

No where in the menus does it show RSSI, Quality, etc

Don't know what to do

Dave
Back to top View user's profile Send private message
Sponsor
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1952
PostPosted: Thu Feb 16, 2023 18:47    Post subject: Reply with quote
Amplifying information as to what version / revision of DD-WRT you flashed and any applicable device configuration screenshots may help. Status pages usually give some information.
_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.
--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
Back to top View user's profile Send private message Visit poster's website
Cable Guy
DD-WRT Novice


Joined: 22 Sep 2012
Posts: 2
PostPosted: Thu Feb 16, 2023 22:23    Post subject: Rocket M Reply with quote
I looked at the status pages, did spectrum, site survey, channel survey - nothing found
Both radios are not linked up, no wireless accesspoints shown, radio is on
Just downloaded current DD_WRT v3.0....Pro license
Both are on the same channel, same SSID, same bandwidth
I've only configured a zillion UBNT radios in my career
What am I missing ?
I go to the wireless tab, input the channel, SSID, bandwidth SAVE APPLY
What more needs to be done ?

Dave
Back to top View user's profile Send private message
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Ubiquiti Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum