Important:if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).
Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
Router/Version: File: Kernel: Mode: Status:
WARNING:This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. ddwrt-linksys-wrt1900ac-webflash.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build. _________________ Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021 SVN Timeline:
https://svn.dd-wrt.com/timeline Commands: Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &
WRT1900ACv1: WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Upgraded WRT1200AC v1 from r41468 to r41491 using Waterfox Classic 2019.10 (64 bit) running on Linux Mint 19.1 OS.
Successful update and reboot. No reset, nothing disabled prior to update, uptime about 1 hr +, wired/wireless connected, vpn up immediately. No drops wired/wireless or vpn. GUI up and running with no issues. I do NOT use QoS or NAS.
Seems to be a noticeable improvement in GUI load speed for me. Almost instant from tab to tab. Browsing sites also seems faster??
Kernel Version Linux 4.9.199-rc1 #1386 SMP Sun Nov 10 05:04:02 CET 2019 armv7l
Nov 10 09:10:59 router daemon.notice openvpn[1656]: OpenVPN 2.4.7 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Nov 10 2019
Nov 10 09:10:59 router daemon.notice openvpn[1656]: library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.09
Joined: 30 May 2017 Posts: 582 Location: Rural Manitoba
Posted: Sun Nov 10, 2019 22:10 Post subject:
Upgraded 41468 -> r41491 all routers.
No problems with upgrade except had to Telnet into two to get GUI working again before I could upgrade.
Have been hoping to get BS some info on why we lose GUI access but I can't see a pattern or sequence. Maybe this release will be better, only time will tell. _________________ Starlink & DSL -> TPLink TL-R470T+
->
WRT3200acm Master WDS 5GHz 80Mhz CH 100 (+6) r55723
Ath1 2.4Ghz Disabled
99 Static Leases
ExpressVPN
WRT3200acm r55723 WDS Station 5Ghz
Ath1 AP N/G Mixed Channel 11 HT40
WRT1900Ac V1 5Ghz r55723 WDS Station
(Defective, no 2.4Ghz but 5Ghz works great)
WRT1900AC V1 5Ghz AC 80Mhz WDS Station r55723
2.4Ghz AP Ch1 HT20 Mixed
WRT1900ACS SPARE r54914
WRT1900AC SPARE r54914
WRT1900AC V1 5Ghz AC 80Mhz WDS-AP r55723
2.4Ghz AP Ch1 HT20 Mixed
WRT54G DD-WRT v3.0-r37305 micro AP CH 6 Mixed - Not in use
This build flashed fine over r40009 with no reset. Everything I use works and the openvpn client launches fine now without having to click apply twice.
My only bug has been the lost of gui after hours of uptime. Gui in this build seems faster so we'll see.
Posted: Mon Nov 11, 2019 19:05 Post subject: WRT3200ACM 5 GHz WDS network (3 stations)
Install went OK but the usual problems still exist. 5 GHz is the most problematic. 5 GHz won't come up after the firmware reboot. It comes back up after fiddling with reboots and/or power cycles and/or "apply settings".
