New BS Beta Build 41328 (15 Oct 2019)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 2626
Location: Texas, USA

PostPosted: Tue Oct 15, 2019 11:47    Post subject: New BS Beta Build 41328 (15 Oct 2019) Reply with quote
Downloads: (if a link does not work, try another)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/10-15-2019-r41328/
ftp://ftp.dd-wrt.com/betas/2019/10-15-2019-r41328/
Alternate link: DD-WRT website
Note: for wget (or curl) with CLI flash (`write {f/w} linux`), change the https to http, use `curl -k {link} -o {file}`, or ftp

Changelogs:
SVN* changelog since last build: 41321
Summary: (deprecated after 29739)
*Github mirror: https://github.com/mirror/dd-wrt/

Notes:
1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer
2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. PBR/UDP with SFE working again since r40513 (see 6729)
5. CAKE scheduler changes "completed" with r41057 (see 5796) & FQ_CODEL_FAST with r41027 (reset first!)
6. Reset button was broken in 40571; fixed in build 40750.

Issues, observations, and/or workarounds reported:
1. Trendnet 81*DRU models are missing factory-to-flash
2. DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use: 6246
3. WDS does not work on Broadcom ARM devices (only MIPS<->MIPS)
4. K2.6 builds are broken since 38253(?) (GUI issues): 6538
5. VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
This appears fixed (only for unbridged VAPs?) with r40564:40566...

Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).

Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
[b]Router/Version: [/b]
[b]File: [/b]
[b]Kernel: [/b]
[b]Mode: [/b]
[b]Status: [/b]

WARNING: This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build.
Sponsor
turbowells
DD-WRT Novice


Joined: 14 Sep 2019
Posts: 47
Location: Maine, USA

PostPosted: Tue Oct 15, 2019 13:00    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-41328_NEWD-2_K3.x_mega_RT-N66U.trx
Kernel: Linux 3.10.108-d8 #306 Mon Oct 14 12:14:47 +04 2019 mips
Mode: AP w/USB
Previous: r41321
Reset?: N
Status: Working

Router/Version: Asus RT-N12D
File: dd-wrt.v24-41328_NEWD-2_K3.x_mega.bin
Kernel: Linux 3.10.108-d8 #306 Mon Oct 14 12:14:47 +04 2019 mips
Mode: Router/OpenVPN client
Previous: r41321
Reset?: N
Status: Working

Flashed from gui. Syslogs clean. Up 2.5 hours. Wait to see if timer/rekey issue reappears as in previous versions.
tinkeruntilitworks
DD-WRT User


Joined: 21 May 2019
Posts: 138

PostPosted: Tue Oct 15, 2019 19:24    Post subject: Reply with quote
Router: Netgear R7000P
Kernel: Linux 4.4.196 #113 SMP Tue Oct 15 07:04:36 +04 2019 armv7l
Mode: Gateway / AP / Unbound
Reset: No
Uptime: 2hrs
Status: all seems well
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 297

PostPosted: Tue Oct 15, 2019 19:57    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r41328 std (10/15/19)
Kernel: Linux 4.4.196 #108 SMP Mon Oct 14 08:35:38 +04 2019 armv7l
Previous: r41321
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.

Uptime: 4hr 30min
Temperatures: CPU 68.6 °C / WL0 48.3 °C / WL1 54.0 °C
Veritech
DD-WRT User


Joined: 02 Jan 2007
Posts: 122

PostPosted: Tue Oct 15, 2019 23:36    Post subject: WNDR4500v2 Reply with quote
Router/Version: WNDR4500v2
File: DD-WRT v3.0-r41328 giga (10/15/19)
Kernel: Linux 3.10.108-d8 #350 Tue Oct 15 11:53:02 +04 2019 mips
Mode: AP/Switch/DHCP Forwarder
Status: Working
Uptime: 14 min
Temps: WL0 42.7 °C / WL1 43.1 °C

The trial issue with the previous build 41321 has disappeared. This flash required no change in procedure and did not brick the router. Will test through the week or until next build.
Cows
DD-WRT Novice


Joined: 06 Dec 2015
Posts: 19

PostPosted: Wed Oct 16, 2019 6:23    Post subject: Reply with quote
Router/Version: Linksys E3200
Mode: Gateway / AP
Status: Erased Nvram after updating and so far everything seems fine. It's been up and running for a few hours but it doesn't get very much use.

One thing I have noticed is that the router says it's using a BCM5357 CPU but every other site that has info on this router says it's using a BCM47186B0 including the DDWrt wiki. This doesn't seem like an issue I just thought I'd point it out.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 4347
Location: Netherlands

PostPosted: Wed Oct 16, 2019 7:46    Post subject: Reply with quote
Router Model: Netgear R6400v1

Firmware Version: DD-WRT v3.0-r41328 std (10/15/19)
Kernel Version: Linux 4.4.196 #108 SMP Mon Oct 14 08:35:38 +04 2019 armv7l

Upgraded from: DD-WRT v3.0-r41218 std (10/01/19)
Reset: No not this time

Status: Up and running for 24 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, DynDNS, 2.4 GHz and 5 GHz

Errors: No

Big Thanks to BrainSlayer

_________________
Routers:Netgear R7800, Netgear R6400v1, Netgear R6400v2, Linksys EA6900 (XvortexCFE), Linksys E2000 (converted WRT320N), WRT54GS v1.
Install guide Linksys EA6900: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=291230
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Veritech
DD-WRT User


Joined: 02 Jan 2007
Posts: 122

PostPosted: Thu Oct 17, 2019 1:21    Post subject: RT-N66R Reply with quote
Router/Version: RT-N66R
File: DD-WRT v3.0-r41328 big (10/15/19)
Kernel: Linux 3.10.108-d8 #332 Tue Oct 15 10:54:16 +04 2019 mips
Mode: AP/Switch/DHCP Forwarder
Status: Working
Uptime: 1hr 9min
Temps: WL0 51.5 °C / WL1 50.0 °C

Flashed from 41303 with no resets.
Valeriy_tc
DD-WRT Novice


Joined: 03 Sep 2016
Posts: 33
Location: Ukraine

PostPosted: Sat Oct 19, 2019 16:15    Post subject: Linksys EA6400 Reply with quote
Router/Version: Linksys EA6400
File: DD-WRT v3.0-r41328 std (10/15/19)
Kernel: Linux 4.4.196 #108 SMP Mon Oct 14 08:35:38 +04 2019 armv7l
Mode: Gateway/Port Forwarding
Status: No issues so far.

Uptime: 6:54
Temperatures: CPU 63.6 °C / WL0 51.2 °C / WL1 55.3 °C
NFear
DD-WRT Novice


Joined: 12 Jan 2018
Posts: 5

PostPosted: Sat Oct 19, 2019 17:15    Post subject: Reply with quote
Router/Version: Linksys E4200 v1
File: DD-WRT v3.0-r41328 mega (10/15/19)
Kernel: Linux 3.10.108-d8 #336 Tue Oct 15 10:57:57 +04 2019 mips
Mode: AP
Status: No issues so far.

Uptime: 1 day, 7:36
Temperatures: WL0 55.0 °C / WL1 54.0 °C
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 4347
Location: Netherlands

PostPosted: Sun Oct 20, 2019 10:06    Post subject: Reply with quote
Router Model: Linksys E2000 (converted N320)

Firmware Version: DD-WRT v3.0-r41328 (10/15/19)
Kernel Version: Linux 3.10.108-d8 #336 Tue Oct 15 10:57:57 +04 2019 mips

Upgraded: from DD-WRT v3.0-r39927 mega (06/03/19) with IE, Firefox seems flaky when updating
Reset: Yes, I had to, the WIF security settings were undefined, I did: nvram erase && reboot

Status: Up and running for 4 hours, basic setup as Gateway, static leases, Wifi working

Errors: No, Seems like a good build

Big Thanks to the devs!!

_________________
Routers:Netgear R7800, Netgear R6400v1, Netgear R6400v2, Linksys EA6900 (XvortexCFE), Linksys E2000 (converted WRT320N), WRT54GS v1.
Install guide Linksys EA6900: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=291230
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
wabe
DD-WRT Guru


Joined: 17 Jun 2006
Posts: 693

PostPosted: Sun Oct 20, 2019 12:17    Post subject: Reply with quote
Router: Asus RT-AC68U rev C1
Kernel: Linux 4.4.196 #113 SMP Tue Oct 15 07:04:36 +04 2019 armv7l
Mode: Gateway / AP
Reset: No, flashed from command line
Status: Seems to work quite well.

_________________
AC-68U rev. C1 on Build 41586
AC-68U rev. A1 on Build 41328
AC-68U rev. A1 on Build 41218
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 2626
Location: Texas, USA

PostPosted: Sun Oct 20, 2019 19:05    Post subject: Reply with quote
egc wrote:

Reset: Yes, I had to, the WIF security settings were undefined, I did: nvram erase && reboot


My last reset since my last brick was here: https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1177489#1177489 <-- and I only did it to confirm the difference in numbers of used/free nvram between CLI/Serial and webUI, which the numbers ARE different. Outside of that, I haven't reset during upgrade process since my last brick, even during all of the QoS fixes where there were 'undefined' settings. I've pretty much determined that the only times it is necessary, and only applicable by device and who compiled the build is at initial flash and/or after a serial or tftp recovery. Outside of that, it's pointless unless something corrupted the nvram, in which case, it likely won't boot completely. The web page issue with settings can likely be solved by clearing cache, and/or F5/refresh page, or the infamous "save" and/or "apply" trick. I only have very random issues with Firefox ESR. Just my thoughts.
kooper2013
DD-WRT User


Joined: 10 Jan 2013
Posts: 60
Location: DE

PostPosted: Sun Oct 20, 2019 23:54    Post subject: Asus RT-AC87U Reply with quote
Router/Version: Asus RT-AC87U/DD-WRT v3.0-r41328 std (10/15/19)
File: ftp://ftp.dd-wrt.com/betas/2019/10-15-2019-r41328/asus-rt-ac87u/asus_rt-ac87u-firmware.trx
Kernel: Linux 4.4.196 #115 SMP Tue Oct 15 07:18:30 +04 2019 armv7l
Mode: AP, 2.4+5GHz
Status: OK, but WAN lost

After an uptime of ~48h this AP lost the WAN-interface and connection (via eth) to the DSL-router for some unexplainable reason. The DSL-router was not available any more, it was not listed in 'Active Clients' (Status/LAN) on the AP (it usually is, same net). I was watching YT on a PC connected via eth to the AP, and eventually paused a video. At around that time or soon after WAN has vanished. Strange, never has happened before. I do not use QOS, SFE is off, firewall is off (except 'Filter Multicast'), it is my DHCP server.

_________________
3xBuffalo WLI-H4-D1300
1xBuffalo WZR-D1800H
1xBuffalo WHR-HP-G300N
1xBuffalo WHR-1166D (stock f/w)
1xASUS RT-AC87U
1xTP710
wabe
DD-WRT Guru


Joined: 17 Jun 2006
Posts: 693

PostPosted: Tue Oct 22, 2019 10:47    Post subject: Reply with quote
wabe wrote:
Router: Asus RT-AC68U rev A1 & C1
Kernel: Linux 4.4.196 #113 SMP Tue Oct 15 07:04:36 +04 2019 armv7l
Mode: Gateway / AP
Reset: No, flashed from command line
Status: Seems to work quite well.

_________________
AC-68U rev. C1 on Build 41586
AC-68U rev. A1 on Build 41328
AC-68U rev. A1 on Build 41218
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum