Beta Build 41269: 10-10-2019-r41269

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2357
Location: Indy

PostPosted: Thu Oct 10, 2019 19:44    Post subject: Beta Build 41269: 10-10-2019-r41269 Reply with quote
Downloads: (if a link does not work, try another)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/10-10-2019-r41269/
ftp://ftp.dd-wrt.com/betas/2019/10-10-2019-r41269/
Alternate link: DD-WRT website
Note: for wget (or curl) with CLI flash (`write {f/w} linux`), change the https to http, use `curl -k {link} -o {file}`, or ftp

Changelogs:
SVN* changelog since last build: 41218
Summary: (deprecated after 29739)
*Github mirror: https://github.com/mirror/dd-wrt/

Notes:
1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer
2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. PBR/UDP with SFE working again since r40513 (see 6729)
5. CAKE scheduler changes "completed" with r41057 (see 5796) & FQ_CODEL_FAST with r41027 (reset first!)
6. Reset button was broken in 40571; fixed in build 40750.

Issues, observations, and/or workarounds reported:
1. Trendnet 81*DRU models are missing factory-to-flash
2. DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use: 6246
3. WDS does not work on Broadcom ARM devices (only MIPS<->MIPS)
4. K2.6 builds are broken since 38253(?) (GUI issues): 6538
5. VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
This appears fixed (only for unbridged VAPs?) with r40564:40566...

Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).

Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
[b]Router/Version: [/b]
[b]File: [/b]
[b]Kernel: [/b]
[b]Mode: [/b]
[b]Status: [/b]

WARNING: This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build.

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 19.7.5|EA6900v1.1@1GHz, F7D8302 FT2019.3b|DD 41218: WNDR4500v2, WNDR4000@533, E1500@353,
E2500, R6300v1, WRT54*@250: GLv1.1 nsg, GSv6 µ
|RT-N66U@663 Merlin 380.70|OEM: WGR614v10@400-WNR1000v3 mod
Sponsor
tinkeruntilitworks
DD-WRT User


Joined: 21 May 2019
Posts: 130

PostPosted: Thu Oct 10, 2019 19:55    Post subject: Reply with quote
Router: Netgear R7000P
Kernel: Linux 4.4.196 #66 SMP Thu Oct 10 08:24:35 +04 2019 armv7l
Mode: Gateway / AP / Unbound
Reset: No
Uptime: 4:08
Status: all seems well
turbowells
DD-WRT Novice


Joined: 14 Sep 2019
Posts: 44
Location: Maine, USA

PostPosted: Thu Oct 10, 2019 20:39    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-41269_NEWD-2_K3.x_mega_RT-N66U.trx
Kernel: Linux 3.10.108-d8 #230 Thu Oct 10 15:05:43 +04 2019 mips
Mode: AP w/USB
Previous: r41218
Reset?: N
Status: Working

Router/Version: Asus RT-N12D
File: dd-wrt.v24-41269_NEWD-2_K3.x_mega.bin
Kernel: Linux 3.10.108-d8 #230 Thu Oct 10 15:05:43 +04 2019 mips
Mode: Router, OpenVPN client
Previous: r41218
Reset?: N
Status: Working

Flashed from gui. Syslogs clean. Up 5 hours. Wait to see if timer/rekey issue reappears as in previous versions.


Last edited by turbowells on Thu Oct 10, 2019 21:37; edited 1 time in total
denislen
DD-WRT Novice


Joined: 16 Sep 2015
Posts: 49

PostPosted: Thu Oct 10, 2019 20:45    Post subject: rt-n10u b1 Reply with quote
wifi works sometimes bad
not working VOIP soft if router is on dd-wrt (UDP not working after NAT if TCP openvpn used)
httpd stucks works only after restart service

best working firmware was 40006
all others has no voip software,wifi,httpd
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 294

PostPosted: Thu Oct 10, 2019 22:02    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r41269 std (10/10/19)
Kernel: Linux 4.4.196 #61 SMP Thu Oct 10 08:01:14 +04 2019 armv7l
Previous: r41218
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far, but poor bufferbloat results with no change in config (will re-test that aspect later).

Edit (2019-10-11)... bufferbloat is back to normal today, must've been the network/site.

Uptime: 55min
Temperatures: CPU 69.1 °C / WL0 48.5 °C / WL1 54.3 °C


Last edited by flyzipper on Fri Oct 11, 2019 20:28; edited 1 time in total
Veritech
DD-WRT User


Joined: 02 Jan 2007
Posts: 113

PostPosted: Fri Oct 11, 2019 1:17    Post subject: WNDR4500v2 Reply with quote
Router/Version: WNDR4500v2
File: DD-WRT v3.0-r41269 giga (10/10/19)
Kernel: Linux 3.10.108-d8 #214 Thu Oct 10 14:52:41 +04 2019 mips
Mode: AP/Switch/DHCP Forwarder
Status: Working
Uptime: 5 min
Previous: 41218
Temps: WL0 43.6 °C / WL1 43.7 °C

I restarted before flashing the new version. Flashing was error free. I will let this unit run for awhile and re-flash once I have more uptime to see if the longer it runs it kills the crc check on flash.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 2327
Location: Texas, USA

PostPosted: Fri Oct 11, 2019 15:05    Post subject: Cisco Linksys E4200 v1 Reply with quote
Router Model / Version: Cisco Linksys E4200 v1
File: dd-wrt.v24-41269_NEWD-2_K3.x_mega-e4200.bin
Firmware: DD-WRT v3.0-r41269 mega (10/10/19)
Kernel: Linux 3.10.108-d8 #230 Thu Oct 10 15:05:43 +04 2019 mips
Previous: DD-WRT v3.0-r41218 mega (10/01/19)
Reset: No
Mode: Gateway / AP - QoS (HFSC+FQ_CODEL_FAST)
Uptime: ~ 17:50
Status: OK
Issues / Errors: Nothing new to report.

Veritech wrote:
I restarted before flashing the new version. Flashing was error free. I will let this unit run for awhile and re-flash once I have more uptime to see if the longer it runs it kills the crc check on flash.


@Veritech, kill the CRC check? That is part of the upgrade program's process. Even stock vendor firmware does that.
Veritech
DD-WRT User


Joined: 02 Jan 2007
Posts: 113

PostPosted: Fri Oct 11, 2019 23:14    Post subject: Re: Cisco Linksys E4200 v1 Reply with quote
kernel-panic69 wrote:
@Veritech, kill the CRC check? That is part of the upgrade program's process. Even stock vendor firmware does that.


All I know so far is when I flashed with days worth of uptime it bricked and when I rebooted the router just before flash it worked. Reading the boot log it looks to me that the crc failed. At 22 hours uptime I tested re-flashing the same version and it was successful. I'll test again in the beginning of next week when it has about 3 days uptime.

.:EDIT:.

From the previous log the file when uploaded was good: linux: CRC OK (0xAE692BE5)
and when it rebooted the crc was done for: Checking crc...Boot program checksum is invalid

so far the only difference in how it is flashed is the length of uptime.
james1795
DD-WRT User


Joined: 11 Jan 2011
Posts: 160

PostPosted: Sat Oct 12, 2019 22:04    Post subject: R8000 Reply with quote
Router: Netgear R8000
Kernel: N/A
Mode: N/A
Reset: Yes
Uptime:
Status: Does not work. I have tried it with a hard reset and upgrade and it does the same thing. No channel selection only Auto. The experimental drivers does not work for my router. Brainslayer please revert the drivers back.
T_o_m
DD-WRT Novice


Joined: 11 Feb 2019
Posts: 7

PostPosted: Mon Oct 14, 2019 7:33    Post subject: Re: rt-n10u b1 Reply with quote
denislen wrote:

best working firmware was 40006

I cant find build with number 40006
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum