Beta Build 41218: 10-01-2019-r41218

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2356
Location: Indy

PostPosted: Tue Oct 01, 2019 13:07    Post subject: Beta Build 41218: 10-01-2019-r41218 Reply with quote
Downloads: (if a link does not work, try another)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/10-01-2019-r41218/
ftp://ftp.dd-wrt.com/betas/2019/10-01-2019-r41218/
Alternate link: DD-WRT website
Note: for wget (or curl) with CLI flash (`write {f/w} linux`), change the https to http, use `curl -k {link} -o {file}`, or ftp

Changelogs:
SVN* changelog since last build: 41212
Summary: (deprecated after 29739)
*Github mirror: https://github.com/mirror/dd-wrt/

Notes:
1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer
2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. PBR/UDP with SFE working again since r40513 (see 6729)
5. CAKE scheduler changes "completed" with r41057 (see 5796) & FQ_CODEL_FAST with r41027 (reset first!)
6. Reset button was broken in 40571; fixed in build 40750.

Issues, observations, and/or workarounds reported:
1. Trendnet 81*DRU models are missing factory-to-flash
2. DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use: 6246
3. WDS does not work on Broadcom ARM devices (only MIPS<->MIPS)
4. K2.6 builds are broken since 38253(?) (GUI issues): 6538
5. VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
This appears fixed (only for unbridged VAPs?) with r40564:40566...

Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).

Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
[b]Router/Version: [/b]
[b]File: [/b]
[b]Kernel: [/b]
[b]Mode: [/b]
[b]Status: [/b]

WARNING: This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build.

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 19.7.5|EA6900v1.1@1GHz, F7D8302 FT2019.3b|DD 41218: WNDR4500v2, WNDR4000@533, E1500@353,
E2500, R6300v1, WRT54*@250: GLv1.1 nsg, GSv6 µ
|RT-N66U@663 Merlin 380.70|OEM: WGR614v10@400-WNR1000v3 mod


Last edited by jwh7 on Tue Oct 01, 2019 23:21; edited 2 times in total
Sponsor
twindragon6
DD-WRT User


Joined: 29 Jun 2008
Posts: 67

PostPosted: Tue Oct 01, 2019 13:42    Post subject: Netgear Nighthawk R7000 Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r41218 std (10/01/19)
Kernel: Linux 4.4.194 #12 SMP Mon Sep 30 11:05:29 +04 2019 armv7l
Mode: Gateway
Reset: No
Previous: 09-30-2019-r41212
Status: Working, QOS slowdowns and issues with HTB and CAKE. Horrible latency almost double or triple most of the time. Also not pulling speeds from Charter Spectrum with QOS enabled.



Logs.txt
 Description:
Logs

Download
 Filename:  Logs.txt
 Filesize:  113.91 KB
 Downloaded:  46 Time(s)



Last edited by twindragon6 on Tue Oct 08, 2019 19:22; edited 1 time in total
turbowells
DD-WRT Novice


Joined: 14 Sep 2019
Posts: 40
Location: Maine, USA

PostPosted: Tue Oct 01, 2019 14:04    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-41218_NEWD-2_K3.x_mega_RT-N66U.trx
Kernel: Linux 3.10.108-d8 #50 Tue Oct 1 11:49:09 +04 2019 mips
Mode: AP w/USB
Previous: r41212
Reset?: N
Status: Working

Router/Version: Asus RT-N12D
File: dd-wrt.v24-41218_NEWD-2_K3.x_mega.bin
Kernel: Linux 3.10.108-d8 #50 Tue Oct 1 11:49:09 +04 2019 mips
Mode: AP
Previous: r41212
Reset?: N
Status: Working

Flashed from gui. Syslogs clean. Up 45 minutes. Wait to see if timer/rekey issue reappears as in previous versions.
tinkeruntilitworks
DD-WRT User


Joined: 21 May 2019
Posts: 130

PostPosted: Tue Oct 01, 2019 15:29    Post subject: Reply with quote
Router: Netgear R7000P
Kernel: Linux 4.4.194 #17 SMP Tue Oct 1 07:26:52 +04 2019 armv7l
Mode: Gateway / AP / Unbound
Reset: No
Uptime: 2:35
Status: all seems well
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 2241
Location: Texas, USA

PostPosted: Tue Oct 01, 2019 20:19    Post subject: Cisco Linksys E4200 v1 Reply with quote
Router Model / Version: Cisco Linksys E4200 v1
File: dd-wrt.v24-41218_NEWD-2_K3.x_mega-e4200.bin
Firmware: DD-WRT v3.0-r41218 mega (10/01/19)
Kernel: Linux 3.10.108-d8 #50 Tue Oct 1 11:49:09 +04 2019 mips
Previous: DD-WRT v3.0-r41212 mega (09/30/19)
Reset: No
Mode: Gateway / AP - QoS (HFSC+FQ_CODEL_FAST)
Uptime: ~ 2:05
Status: OK
Issues / Errors: Nothing new to report.

flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 294

PostPosted: Tue Oct 01, 2019 21:48    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r41218 std (10/01/19)
Kernel: Linux 4.4.194 #12 SMP Mon Sep 30 11:05:29 +04 2019 armv7l
Previous: r41212
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.

Uptime: 36min
Temperatures: CPU 69.1 °C / WL0 48.5 °C / WL1 54.3 °C
wabe
DD-WRT Guru


Joined: 17 Jun 2006
Posts: 690

PostPosted: Wed Oct 02, 2019 10:16    Post subject: Reply with quote
Router/Version: Asus RT-AC68U ver A1 & C1
Firmware: DD-WRT v3.0-r41218 std (10/01/19)
Kernel: Linux 4.4.194 #12 SMP Mon Sep 30 11:05:29 +04 2019 armv7l
Mode: Gateway / AP
Reset: No, flashed from console. Power Cycle after flash
Status: Working well so far

_________________
AC-68U rev. C1 on Build 41459
AC-68U rev. A1 on Build 41328
AC-68U rev. A1 on Build 41218


Last edited by wabe on Fri Oct 04, 2019 12:52; edited 1 time in total
Valeriy_tc
DD-WRT Novice


Joined: 03 Sep 2016
Posts: 33
Location: Ukraine

PostPosted: Wed Oct 02, 2019 13:38    Post subject: Linksys EA6400 Reply with quote
Router/Version: Linksys EA6400
File: DD-WRT v3.0-r41218 std (10/01/19)
Kernel: Linux 4.4.194 #12 SMP Mon Sep 30 11:05:29 +04 2019 armv7l
Mode: Gateway/Port Forwarding
Status: No issues so far.

Uptime: 27 min
Temperatures: CPU 65.8 °C / WL0 50.6 °C / WL1 54.5 °C
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2356
Location: Indy

PostPosted: Wed Oct 02, 2019 19:25    Post subject: Reply with quote
Router/Version: Netgear WNDR4500v2
File: .bin: DD-WRT v3.0-r41218 giga (10/01/19)
Kernel: Linux 3.10.108-d8 #34 Tue Oct 1 11:35:18 +04 2019 mips
Mode: AP
Status: working; upgrade from 40559

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 19.7.5|EA6900v1.1@1GHz, F7D8302 FT2019.3b|DD 41218: WNDR4500v2, WNDR4000@533, E1500@353,
E2500, R6300v1, WRT54*@250: GLv1.1 nsg, GSv6 µ
|RT-N66U@663 Merlin 380.70|OEM: WGR614v10@400-WNR1000v3 mod
rte4343
DD-WRT Novice


Joined: 20 Feb 2019
Posts: 3

PostPosted: Thu Oct 03, 2019 16:19    Post subject: Reply with quote
Router/Version: Netgear R6250
File/Firmware: DD-WRT v3.0-r41218 std (10/01/19)
Kernel: Linux 4.4.194 #12 SMP Mon Sep 30 11:05:29 +04 2019 armv7l
Mode: Gateway
Status: OK
Previous: r40048
Uptime: 1 day, 6:31

Working fine.
I set the webgui to reset the settings to default after flashing.
jade2g
DD-WRT Novice


Joined: 04 Jul 2018
Posts: 6

PostPosted: Fri Oct 04, 2019 2:18    Post subject: Upgrade issue Reply with quote
Router/Version: TrendNet TEW-828DRU
File/Firmware: DD-WRT v3.0-r41218 std (10/01/19)
Mode: Bridge
Status: Problem
Previous: r39296
Reset: yes
Uptime: 0

The upgrade process said the upgrade was successful, and my router turns on; it appears to be working, but it is no longer reachable. (Can't ping, can't access). My system shows it is connected, but I'm not sure what to do now. I have done two hard resets (30-30-30), but no change. The router does appear to reset about every 2~3 minutes as all of the port lights flash on and then go off, and then the port that is connected lights back up.
Mr.R™
DD-WRT Novice


Joined: 01 Jun 2010
Posts: 23

PostPosted: Fri Oct 04, 2019 11:21    Post subject: Reply with quote
Router/Version: Asus RT-AC87U
File: DD-WRT v3.0-r41218 std (10/01/19)
Kernel: Linux 4.4.194 #19 SMP Tue Oct 1 07:41:40 +04 2019 armv7l
Mode: Gateway (PPOE/DHCPv6/QOS/Access Restrictions/Port Forwarding/JFS/USB/Entware)
Status: WiFi Broken

Wifi hasn't worked for me since DD-WRT v3.0-r40890 std (09/03/19), both 2.4 and 5Ghz allow devices to connect but they all state "Connected, No Internet", have tried both a flash with and without reset, makes no difference

Syslog is attached, the dnsmasq-dhcp[1549] entries are relating to the wifi devices trying to connect



syslog.txt
 Description:

Download
 Filename:  syslog.txt
 Filesize:  22.52 KB
 Downloaded:  35 Time(s)

jrscs
DD-WRT User


Joined: 09 Aug 2010
Posts: 232

PostPosted: Fri Oct 04, 2019 15:53    Post subject: Reply with quote
Router/Version: RT-AC87U A1
File: asus_rt-ac87u-firmware.trx
Firmware: DD-WRT v3.0-r41218 std (10/01/19)
Kernel: Linux 4.4.194 #19 SMP Tue Oct 1 07:41:40 +04 2019 armv7l
Mode/Status: Gateway/AP/OK
Reset: No
Setup Using: 2.4 GHz, 2.4 GHz guest (VAP), 5.0 GHz, IPv4, DNSMasq, Port Forwarding, USB, NAS, NTP TimeSync, and Wake-on-WAN(internet)
Issues/Errors: Yes, but connections state no Internet Connection yet they do connect after a few moments longer. Everything is working...

_________________
Asus AC87U A1 - DD-WRT v3.0-r41418 std (10/30/19)
Repeater Bridges(s)
Asus AC68R A1 - DD-WRT v3.0-r41418 std (10/30/19)
Netgear R6400 V2 - DD-WRT v3.0-r41418 std (10/30/19)
Asus AC66U A1 - DD-WRT v3.0-r41418 giga (10/30/19)
Zyxx
DD-WRT User


Joined: 28 Dec 2018
Posts: 53

PostPosted: Fri Oct 04, 2019 16:39    Post subject: Reply with quote
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r41218 std (10/01/19)
Kernel: Linux 4.4.194 #12 SMP Mon Sep 30 11:05:29 +04 2019 armv7l
Mode: Gateway, Wifi disabled
Reset: No
Status: updated 10h ago, working!
technoside2
DD-WRT Novice


Joined: 25 Oct 2018
Posts: 44

PostPosted: Sat Oct 05, 2019 2:07    Post subject: EA6350 V2 Reply with quote
Router/Version: Linksys EA6350 v2
File: linksys-ea6350-webflash.bin
Firmware: DD-WRT v3.0-r41218 std (10/01/19 )
Kernel: Linux 4.4.194 #12 SMP Mon Sep 30 11:05:29 +04 2019 armv7l
Mode: Gateway, 2.4 and 5Ghz wireless working well.
Reset: No
Status: working!

_________________
WRT54GL v1.1 - Flashed
Linksys WRT54G2 v1 - Flashed
EA6350 v2 - Flashed
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum