Notes: 1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer 2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. PBR/UDP with SFE working again since r40513 (see 6729)
5. CAKE scheduler changes "completed" with r41057 (see 5796) & FQ_CODEL_FAST with r41027 (reset first!)
6. Reset button was broken in 40571; fixed in build 40750.
Issues, observations, and/or workarounds reported: 1.Trendnet 81*DRU models are missing factory-to-flash 2.DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use:6246 3.WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) 4.K2.6 builds are broken since 38253(?) (GUI issues):6538 5.VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
This appears fixed (only for unbridged VAPs?) with r40564:40566...
Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).
Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
WARNING:This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Last edited by jwh7 on Tue Oct 01, 2019 23:21; edited 2 times in total
Posted: Tue Oct 01, 2019 13:42 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r41218 std (10/01/19) Kernel: Linux 4.4.194 #12 SMP Mon Sep 30 11:05:29 +04 2019 armv7l Mode: Gateway Reset: No Previous: 09-30-2019-r41212 Status: Working, QOS slowdowns and issues with HTB and CAKE. Horrible latency almost double or triple most of the time. Also not pulling speeds from Charter Spectrum with QOS enabled.
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Tue Oct 01, 2019 14:04 Post subject:
Router/Version: Asus RT-N66U
File: dd-wrt.v24-41218_NEWD-2_K3.x_mega_RT-N66U.trx
Kernel: Linux 3.10.108-d8 #50 Tue Oct 1 11:49:09 +04 2019 mips
Mode: AP w/USB
Previous: r41212
Reset?: N
Status: Working
Router/Version: Asus RT-N12D
File: dd-wrt.v24-41218_NEWD-2_K3.x_mega.bin
Kernel: Linux 3.10.108-d8 #50 Tue Oct 1 11:49:09 +04 2019 mips
Mode: AP
Previous: r41212
Reset?: N
Status: Working
Flashed from gui. Syslogs clean. Up 45 minutes. Wait to see if timer/rekey issue reappears as in previous versions.
Router: Netgear R7000P
Kernel: Linux 4.4.194 #17 SMP Tue Oct 1 07:26:52 +04 2019 armv7l
Mode: Gateway / AP / Unbound
Reset: No
Uptime: 2:35
Status: all seems well
Router/Version: Asus RT-AC68U ver A1 & C1
Firmware: DD-WRT v3.0-r41218 std (10/01/19)
Kernel: Linux 4.4.194 #12 SMP Mon Sep 30 11:05:29 +04 2019 armv7l
Mode: Gateway / AP
Reset: No, flashed from console. Power Cycle after flash
Status: Working well so far _________________ Netgear R7000 on Build 55109
Asus AC-AC68U rev. C1 (AP) on Build 55109
Asus AC-68U rev. A1 on Build 54604
Asus AC-68U rev. A1 on Build 53339
Last edited by wabe on Fri Oct 04, 2019 12:52; edited 1 time in total
The upgrade process said the upgrade was successful, and my router turns on; it appears to be working, but it is no longer reachable. (Can't ping, can't access). My system shows it is connected, but I'm not sure what to do now. I have done two hard resets (30-30-30), but no change. The router does appear to reset about every 2~3 minutes as all of the port lights flash on and then go off, and then the port that is connected lights back up.
Router/Version: Asus RT-AC87U
File: DD-WRT v3.0-r41218 std (10/01/19)
Kernel: Linux 4.4.194 #19 SMP Tue Oct 1 07:41:40 +04 2019 armv7l
Mode: Gateway (PPOE/DHCPv6/QOS/Access Restrictions/Port Forwarding/JFS/USB/Entware)
Status: WiFi Broken
Wifi hasn't worked for me since DD-WRT v3.0-r40890 std (09/03/19), both 2.4 and 5Ghz allow devices to connect but they all state "Connected, No Internet", have tried both a flash with and without reset, makes no difference
Syslog is attached, the dnsmasq-dhcp[1549] entries are relating to the wifi devices trying to connect
Router/Version: RT-AC87U A1
File: asus_rt-ac87u-firmware.trx
Firmware: DD-WRT v3.0-r41218 std (10/01/19)
Kernel: Linux 4.4.194 #19 SMP Tue Oct 1 07:41:40 +04 2019 armv7l
Mode/Status: Gateway/AP/OK
Reset: No
Setup Using: 2.4 GHz, 2.4 GHz guest (VAP), 5.0 GHz, IPv4, DNSMasq, Port Forwarding, USB, NAS, NTP TimeSync, and Wake-on-WAN(internet)
Issues/Errors: Yes, but connections state no Internet Connection yet they do connect after a few moments longer. Everything is working... _________________ Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridge
Netgear R6400v2otp
