Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).
Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
WARNING:This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build.
Okey... lets says its time to test offical build on my dual dir878 routers after ~3 months... i was using brolys builds up until now with more or less no issues (something like remote logging / custom ntp server didnt work and webui crashed once in a while but at least it was working as an AP and thats all i needed), lets see if ill be disappointed... ill report after couple of hours
EDIT: some progress in last 3 months...
Router/Version: Dlink DIR-878
File: Kernel: Mode: AP/Router
Status: 2.4Ghz seems to work, i can set custom wireless channel, WPA2/AES seems to work, clients connect fine, however 5ghz does not work unless i leave channel to auto, as soon as i set custom channel 5Ghz network disapears from the list, tried channel 100 with mode auto / ac only and channel width 80 / 160. Also you cant set extension channel with 2.4ghz and channel width 20/40 (but 2.4ghz still works with custom channel and this is important thing to me). However what is deal breaking is, wireless printer for some reason does not work properly... while ip is accessible and normal printer works, printer doesnt show up in network manager in win10 also for example its not detected by HP scan application, so you cant scan unless you use WEB scan. Also samba share is not accessible on my raspberry connected to wireless... like udp forwarding would be broken, i had same issue with brolys build ~2 months ago but got fixed (and yes SPI firewall is disabled)...