New BETA r41027 09-13-2019-r41027

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3  Next
Author Message
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1300

PostPosted: Fri Sep 13, 2019 11:53    Post subject: New BETA r41027 09-13-2019-r41027 Reply with quote
New BETA r41027 09-13-2019-r41027

ftp://ftp.dd-wrt.com/betas/2019/09-13-2019-r41027/
or
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/09-13-2019-r41027/

Please report errors or other changes with this new build release.

Release Notes:
http://svn.dd-wrt.com/timeline

Router Model:
Status:
Reset:
Errors:
Sponsor
msoengineer
DD-WRT Guru


Joined: 21 Jan 2017
Posts: 1141
Location: Illinois Moderator

PostPosted: Fri Sep 13, 2019 16:02    Post subject: Reply with quote
Router ModelNetgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r41027 std (09/12/19)
Kernel VersionLinux 4.9.192 #382 SMP Tue Sep 10 23:52:47 CEST 2019 armv7l

Web Upgraded from Alpha build 40999- No Reset.

Speedtest scores are great using HFSC/FQ_Fast on wired.
Also just fine on wifi. There still is some room for wired latency improvement, but I am happy for my purposes. I know that Tatsuya will think this is still not great latency... I am convinced some of this is Comcast and I have no control over it. Harware wise, I am running the best possible stuff: MB8600 cable modem, R9000 router.


_________________
TIPS/TRICKS: Best QCA Wifi Settings | QCA WIFI WIKI | Latency tricks | QoS Port priority | NEVER USE MU-MIMO |
Why to NOT use MU-MIMO | Max Wifi Pwr by Country | Linux Wifi Pwr | AC MCS & AX MCS | QCA 5Ghz chnls to use | WIFI Freq WIKI | TFTP R7800 | Don't buy AX | IPERF3 How-To

[R9000]43874 nightly (Main Router)
[EA8500]43192 nightly (2xOffsite)
[R7800]taking a nap
[WDR3600]BS 42567 (Offsite)
[A7v5]BS 43038 (Offsite+spare here napping)
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5268
Location: Texas

PostPosted: Fri Sep 13, 2019 16:38    Post subject: Reply with quote
EA8500
DD-WRT v3.0-r41027 std (09/13/19)
Linux 4.9.192 #469 SMP Tue Sep 10 14:00:11 CEST 2019 armv7l
GUI install over r40932

I changed QOS around several times using the
damnol WIN10 Ver 1903 OS 18362.356 using Chrome Ver 77.0.3865.75 or using FF 69.0
but either would always give shitty D bufferbloat
Evil or Very Mad
finally said WTH and went back to my real computer Cool
HFSC CAKE
all TCP-Packet Priority check but not ICMP

http://www.dslreports.com/speedtest/54231506
http://www.dslreports.com/speedtest/54231604

here's one from the winders machine -- Rolling Eyes
http://www.dslreports.com/speedtest/54232504

#

WNDR3700 V4
DD-WRT v3.0-r41027 std (09/13/19)
Linux 3.18.140 #53979 Fri Sep 13 03:17:12 +04 2019 mips
GUI install over r40999
all good

#

WRT160NL
DD-WRT v3.0-r41027 std (09/13/19)
Linux 3.10.108-d8 #22144 Fri Sep 13 01:50:01 +04 2019 mips
GUI install over r40948
all good
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7344
Location: YWG, Canada

PostPosted: Fri Sep 13, 2019 18:35    Post subject: Reply with quote
msoengineer wrote:
I know that Tatsuya will think this is still not great latency...


correct

mrjcd wrote:
EA8500
DD-WRT v3.0-r41027 std (09/13/19)
Linux 4.9.192 #469 SMP Tue Sep 10 14:00:11 CEST 2019 armv7l
GUI install over r40932

I changed QOS around several times using the
damnol WIN10 Ver 1903 OS 18362.356 using Chrome Ver 77.0.3865.75 or using FF 69.0
but either would always give shitty D bufferbloat
Evil or Very Mad
finally said WTH and went back to my real computer Cool
HFSC CAKE
all TCP-Packet Priority check but not ICMP

http://www.dslreports.com/speedtest/54231506
http://www.dslreports.com/speedtest/54231604

here's one from the winders machine -- Rolling Eyes
http://www.dslreports.com/speedtest/54232504

#

WNDR3700 V4
DD-WRT v3.0-r41027 std (09/13/19)
Linux 3.18.140 #53979 Fri Sep 13 03:17:12 +04 2019 mips
GUI install over r40999
all good

#

WRT160NL
DD-WRT v3.0-r41027 std (09/13/19)
Linux 3.10.108-d8 #22144 Fri Sep 13 01:50:01 +04 2019 mips
GUI install over r40948
all good


what hardware is that on? that browser cpu score is absurdly low even if the bullshit timer precision things are enabled in browser.

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/6174 ---> DD-WRT v3.0-r44188 std
[QUALCOMM] DIR-862L ------------------------> DD-WRT v3.0-r44188 std
[QUALCOMM] DIR-862L ------------------------> DD-WRT v3.0-r44188 std
[QUALCOMM] WNDR4300 v1 ------------------> DD-WRT v3.0-r44188 std
▲ ACTIVE / INACTIVE ▼
[BROADCOM] DIR-860L A1 -------------------> DD-WRT v3.0-r44048 std


If you use DSLReports please enable hi-res bufferbloat.


Sigh.. why do i exist anyway..
Jovan
DD-WRT User


Joined: 06 Nov 2018
Posts: 105

PostPosted: Fri Sep 13, 2019 18:47    Post subject: Reply with quote
DD-WRT v3.0-r41027 std (c) 2019 NewMedia-NET GmbH Release: 09/13/19 Board: TP-Link TL-WR841ND v11

Update from r40932 via telnet
Reset: No (and I'm afraid to do so, see below)
Working OK as AP, NG-mixed, HT40, QOS

Problem: Web interface doesn't respond.
https://imgur.com/fNcah7W

https://imgur.com/jFOJ52u

"Top" command shows no httpd:

https://imgur.com/ThV9XSI

If I do "nvram set http_enable=1 && reboot" httpd shows up in top but WebIF still doesn't respond.
https://imgur.com/HhECxSa

As far I can tell router works OK with it's old settings, but... Without WebIF I don't know how to configure the router and I don't know if I could access it via telnet after a hard reset, so perhaps I will downgrade to r40932.
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5268
Location: Texas

PostPosted: Fri Sep 13, 2019 19:10    Post subject: Reply with quote
tatsuya46 wrote:

what hardware is that on? ...

Both are identical machines, and yea both have 10 GB RAM.
Both have two HDs with Linux on one & winders on the other.
One machine stays on Debian mostly all the time and the other stays on WIN10 most all time

da Debian machine



da winders mache
marcelo3d
DD-WRT User


Joined: 07 Aug 2017
Posts: 74

PostPosted: Fri Sep 13, 2019 19:50    Post subject: Reply with quote
Main router:
Router Name DD-WRT
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r41027 std (09/13/19)
Kernel VersionLinux 4.9.192 #469 SMP Tue Sep 10 14:00:11 CEST 2019 armv7l

AP:
Router Name DD-WRT2
Router Model Dlink DIR859
Firmware Version DD-WRT v3.0-r41027 std (09/13/19)
Kernel VersionLinux 3.18.140 #53969 Fri Sep 13 03:00:54 +04 2019 mips

No reset on either.
Both working OK.
Uptime: 24 min
MomenMamdouh
DD-WRT User


Joined: 19 Sep 2017
Posts: 62
Location: Egypt

PostPosted: Fri Sep 13, 2019 19:57    Post subject: Reply with quote
Router Model: TP-Link ARCHER-C7 v2
Status: Not good
Errors: Enabling QoS still causes memory leak (Free Mem only 4%), I've updated the following ticket with some kern.warn messages that might help in resolving the problem:
https://svn.dd-wrt.com/ticket/6798

Edit: On recent builds every time i start a session using WinSCP or Putty the attached maessage pops up!!

_________________
Routers:
TP-Link Archer C7 v2-(EU)
TP-Link WR840n v3
TP-Link WR740n v5


Last edited by MomenMamdouh on Fri Sep 13, 2019 20:11; edited 1 time in total
Jovan
DD-WRT User


Joined: 06 Nov 2018
Posts: 105

PostPosted: Fri Sep 13, 2019 20:11    Post subject: Reply with quote
Jovan wrote:
DD-WRT v3.0-r41027 std (c) 2019 NewMedia-NET GmbH Release: 09/13/19 Board: TP-Link TL-WR841ND v11

Update from r40932 via telnet
Reset: No (and I'm afraid to do so, see below)
Working OK as AP, NG-mixed, HT40, QOS

Problem: Web interface doesn't respond.
https://imgur.com/fNcah7W

https://imgur.com/jFOJ52u

"Top" command shows no httpd:

https://imgur.com/ThV9XSI

If I do "nvram set http_enable=1 && reboot" httpd shows up in top but WebIF still doesn't respond.
https://imgur.com/HhECxSa

As far I can tell router works OK with it's old settings, but... Without WebIF I don't know how to configure the router and I don't know if I could access it via telnet after a hard reset, so perhaps I will downgrade to r40932.

I downgraded to r40932, webif works again. For the sake of experiment I nvram reset it to find out if I could connect via telnet before setting a user & password via WebIf -> no, it refuses to connect. So, good thing I didn't reset on r41027, only way out would have been TFTP to factory firmware.
Lusitano
DD-WRT User


Joined: 25 Jun 2014
Posts: 123
Location: São Paulo - Brazil

PostPosted: Fri Sep 13, 2019 20:34    Post subject: Reply with quote
Jovan wrote:
Jovan wrote:
DD-WRT v3.0-r41027 std (c) 2019 NewMedia-NET GmbH Release: 09/13/19 Board: TP-Link TL-WR841ND v11

Update from r40932 via telnet
Reset: No (and I'm afraid to do so, see below)
Working OK as AP, NG-mixed, HT40, QOS

Problem: Web interface doesn't respond.
https://imgur.com/fNcah7W

https://imgur.com/jFOJ52u

"Top" command shows no httpd:

https://imgur.com/ThV9XSI

If I do "nvram set http_enable=1 && reboot" httpd shows up in top but WebIF still doesn't respond.
https://imgur.com/HhECxSa

As far I can tell router works OK with it's old settings, but... Without WebIF I don't know how to configure the router and I don't know if I could access it via telnet after a hard reset, so perhaps I will downgrade to r40932.

I downgraded to r40932, webif works again. For the sake of experiment I nvram reset it to find out if I could connect via telnet before setting a user & password via WebIf -> no, it refuses to connect. So, good thing I didn't reset on r41027, only way out would have been TFTP to factory firmware.


I reseted TL-WR841ND v11 with r41027 Confused
Now i get connection refused.. don't know what to do.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 6994
Location: Texas, USA

PostPosted: Fri Sep 13, 2019 20:40    Post subject: Reply with quote
Refused for what? Telnet on port 23, http on port 80, https on port 443? You may need to reboot it a second time.
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1377

PostPosted: Fri Sep 13, 2019 21:20    Post subject: Reply with quote
R7800
DD-WRT v3.0-r41027 std (09/13/19)
Linux 4.9.192 #469 SMP
Webif upgrade over 40999
No reset
No errors

All I use working ok

Thank You BrainSlayer
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 3712
Location: UK, London, just across the river..

PostPosted: Fri Sep 13, 2019 22:02    Post subject: Reply with quote
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r41027 std (09/13/19)
Kernel Version Linux 3.18.140 #53953 Fri Sep 13 02:40:16 +04 2019 mips

update: CLI 40932 > 41027
reset: NO
status: Operational 3h+

errors: Yet nothing for my set up, all worky-worky...!!

_________________
Atheros
TP-Link WR740Nv1 ------DD-WRT 44085 BS AP,NAT
TP-Link WR740Nv4 ------DD-WRT 43028 BS WAP/Switch
TP-Link WR1043NDv2 ----DD-WRT 44112 BS AP,NAT,AP Isolation,Firewall,Local DNS,Forced DNS,DoT,VPN
TP-Link WR1043NDv2 ----DD-WRT 44048 BS AP,NAT,AD Block,Firewall,Local DNS,Forced DNS,DoT,VPN
TP-Link WR1043NDv2 ----Gargoyle OS 1.12.0 AP,NAT,QoS,Quotas
Qualcomm/IPQ8065
Netgear R7800 -------DD-WRT 44112 BS AP,NAT,AD-Block,AP&Net Isolation,VLAN's,Firewall,Local DNS,DoT
Broadcom
Netgear R7000 -------DD-WRT 44112 BS AP,Wi-Fi OFF,NAT,AD-Block,Firewall,Local DNS,Forced DNS,DoT,VPN
------------------------------------------------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 by mac913
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5268
Location: Texas

PostPosted: Fri Sep 13, 2019 22:35    Post subject: Reply with quote
main router EA8500
New opvn ciphers seem to work ok ....and I'm glad to see the silly AES-512 CBC selection is now gone Cool
I just changed her to --
Code:
mrjcd@Deb:~$ ssh root@citadel-station-homeworld.mrjcd.com
DD-WRT v3.0-r41027 std (c) 2019 NewMedia-NET GmbH
Release: 09/13/19
Board: Linksys EA8500
==========================================================
 
     ___  ___     _      _____  ______       ____  ___
    / _ \/ _ \___| | /| / / _ \/_  __/ _  __|_  / / _ \
   / // / // /___/ |/ |/ / , _/ / /   | |/ //_ <_/ // /
  /____/____/    |__/|__/_/|_| /_/    |___/____(_)___/
                                                     
                       DD-WRT v3.0
                   http://www.dd-wrt.com
 
==========================================================


BusyBox v1.31.0 (2019-09-13 00:01:57 CEST) built-in shell (ash)

root@Citadel-Station-Homeworld:~# cat /tmp/var/log/messages | grep openvpn
Dec 31 18:00:34 Citadel-Station-Homeworld user.info : openvpn : OpenVPN daemon (Server) starting/restarting...
Dec 31 18:00:34 Citadel-Station-Homeworld daemon.warn openvpn[2188]: WARNING: Using --management on a TCP port WITHOUT passwords is STRONGLY discouraged and considered insecure
Dec 31 18:00:34 Citadel-Station-Homeworld daemon.notice openvpn[2188]: OpenVPN 2.4.7 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Sep 13 2019
Dec 31 18:00:34 Citadel-Station-Homeworld daemon.notice openvpn[2188]: library versions: OpenSSL 1.1.1c  28 May 2019, LZO 2.09
Dec 31 18:00:34 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:14
Dec 31 18:00:34 Citadel-Station-Homeworld daemon.warn openvpn[2190]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Dec 31 18:00:34 Citadel-Station-Homeworld daemon.notice openvpn[2190]: Diffie-Hellman initialized with 4096 bit key
Dec 31 18:00:34 Citadel-Station-Homeworld daemon.warn openvpn[2190]: WARNING: Your certificate is not yet valid!
Dec 31 18:00:34 Citadel-Station-Homeworld daemon.notice openvpn[2190]: TUN/TAP device tun2 opened
Dec 31 18:00:34 Citadel-Station-Homeworld daemon.notice openvpn[2190]: TUN/TAP TX queue length set to 100
Dec 31 18:00:34 Citadel-Station-Homeworld daemon.notice openvpn[2190]: /sbin/ifconfig tun2 10.172.128.241 netmask 255.255.255.240 mtu 1500 broadcast 10.172.128.255
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: Socket Buffers: R=[180224->180224] S=[180224->180224]
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: UDPv4 link local (bound): [AF_INET][undef]:xxxxx
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: UDPv4 link remote: [AF_UNSPEC]
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MULTI: multi_init called, r=256 v=256
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: IFCONFIG POOL: base=10.172.128.242 size=12, ipv6=0
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: IFCONFIG POOL LIST
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: Initialization Sequence Completed
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: Client connected from [AF_INET]127.0.0.1:14
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: CMD 'state'
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: Client disconnected
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: Client connected from [AF_INET]127.0.0.1:14
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: CMD 'state'
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: Client disconnected
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: Client connected from [AF_INET]127.0.0.1:14
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: CMD 'state'
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: Client disconnected
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: Client connected from [AF_INET]127.0.0.1:14
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: Client disconnected
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: NOTE: --mute triggered...
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 1 variation(s) on previous 3 message(s) suppressed by --mute
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: CMD 'status 2'
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: Client disconnected
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: Client connected from [AF_INET]127.0.0.1:14
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: CMD 'status 2'
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: Client disconnected
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: Client connected from [AF_INET]127.0.0.1:14
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: CMD 'log 500'
Sep 13 16:46:28 Citadel-Station-Homeworld daemon.notice openvpn[2190]: MANAGEMENT: Client disconnected
Sep 13 16:51:13 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 TLS: Initial packet from [AF_INET]174.207.27.45:9364, sid=cb0f018c e3f0633a
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 VERIFY OK: depth=1, C=US, ST=TX, L=Loving, O=MRJCD Networking, OU=MRJCD, CN=mrjcd, name=MRJCD, emailAddress=mrjcd@mrjcd.comn
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 VERIFY OK: depth=0, C=US, ST=TX, L=Loving, O=MRJCD Networking, OU=MRJCD, CN=mrjcd101, name=MRJCD, emailAddress=mrjcd@mrjcd.comn
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 peer info: IV_VER=2.4.7
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 peer info: IV_PLAT=linux
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 peer info: IV_PROTO=2
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 peer info: IV_NCP=2
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 peer info: IV_LZ4=1
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 peer info: IV_LZ4v2=1
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 peer info: IV_LZO=1
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 peer info: IV_COMP_STUB=1
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 peer info: IV_COMP_STUBv2=1
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 peer info: IV_TCPNL=1
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 Outgoing Data Channel: Cipher 'AES-128-GCM' initialized with 128 bit key
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 Incoming Data Channel: Cipher 'AES-128-GCM' initialized with 128 bit key
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 Control Channel: TLSv1.3, cipher TLSv1.3 TLS_AES_256_GCM_SHA384, 4096 bit RSA
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: 174.207.27.45:9364 [mrjcd101] Peer Connection Initiated with [AF_INET]174.207.27.45:9364
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: mrjcd101/174.207.27.45:9364 MULTI_sva: pool returned IPv4=10.172.128.242, IPv6=(Not enabled)
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: mrjcd101/174.207.27.45:9364 OPTIONS IMPORT: reading client specific options from: /tmp/openvpn_cc_1fddcf9e5f41d8a2.tmp
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: mrjcd101/174.207.27.45:9364 MULTI: Learn: 10.172.128.242 -> mrjcd101/174.207.27.45:9364
Sep 13 16:51:14 Citadel-Station-Homeworld daemon.notice openvpn[2190]: mrjcd101/174.207.27.45:9364 MULTI: primary virtual IP for mrjcd101/174.207.27.45:9364: 10.172.128.242
Sep 13 16:51:15 Citadel-Station-Homeworld daemon.notice openvpn[2190]: mrjcd101/174.207.27.45:9364 PUSH: Received control message: 'PUSH_REQUEST'
Sep 13 16:51:15 Citadel-Station-Homeworld daemon.notice openvpn[2190]: mrjcd101/174.207.27.45:9364 SENT CONTROL [mrjcd101]: 'PUSH_REPLY,redirect-gateway def1,dhcp-option DNS 10.172.128.241,route-gateway 10.172.128.241,topology subnet,ping 10,ping-restart 120,ifconfig 10.172.128.242 255.255.
root@Citadel-Station-Homeworld:~#

The only thing I see, and you won't know it unless you check that its running, is the ovpn server
WILL NOT startup after making cipher change unless you 'Apply Settings' twice or reboot.
and yea, I waited plenty long enough on it. Razz
AND
Now that I think 'bout it, that has been a little issue for a while ....ANY change made in webif to the ovpn
you must hit 'Apply Setting' twice. I'm thinking this is noted in some other posts also regarding DD-WRT ovpn client
Rolling Eyes
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1377

PostPosted: Fri Sep 13, 2019 23:05    Post subject: Reply with quote
mrjcd wrote:
main router EA8500
New opvn ciphers seem to work ok ....and I'm glad to see the silly AES-512 CBC selection is now gone Cool

Still there on R7800

Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum