Use serial first. wiki:serial recovery. _________________ SIG:
I'm trying to teach you to fish, not give you a fish. If you just want a fish, wait for a fisherman who hands them out. I'm more of a fishing instructor.
LOM: "If you show that you have not bothered to read the forum announcements or to follow the advices in them then the level of help available for you will drop substantially, also known as Murrkf's law.."
As always, start with reading the peacock announcement, particularly note 6. _________________ SIG:
I'm trying to teach you to fish, not give you a fish. If you just want a fish, wait for a fisherman who hands them out. I'm more of a fishing instructor.
LOM: "If you show that you have not bothered to read the forum announcements or to follow the advices in them then the level of help available for you will drop substantially, also known as Murrkf's law.."
And what were your ping responses. You need to provide much more info before you jump into a cable solution. Read note 6 carefully. _________________ SIG:
I'm trying to teach you to fish, not give you a fish. If you just want a fish, wait for a fisherman who hands them out. I'm more of a fishing instructor.
LOM: "If you show that you have not bothered to read the forum announcements or to follow the advices in them then the level of help available for you will drop substantially, also known as Murrkf's law.."
What i try:
1. Set static IP 192.168.1.5 Mask: 255.255.255.0
2. i prepare tftp upload stock linksys firmware - (FW_EA6200_1.1.41.164830_prod.img)
3. Run cmd and ping 192.168.1.1 -t
4. when pings get answer from 192.168.1.1 i immediatly press Upgrade in TFTP (i also try some times little before respond)
I get info from TFTP:
Erasing Flash...
Unable to get responses from the server.
Retry (3/3)...
What i try:
1. Set static IP 192.168.1.5 Mask: 255.255.255.0
2. i prepare tftp upload stock linksys firmware - (FW_EA6200_1.1.41.164830_prod.img)
3. Run cmd and ping 192.168.1.1 -t
4. when pings get answer from 192.168.1.1 i immediatly press Upgrade in TFTP (i also try some times little before respond)
I get info from TFTP:
Erasing Flash...
Unable to get responses from the server.
Retry (3/3)...
what are the TTL responses? "100" that is the best time to start TFTP
timing can be tricky (very tricky), if you are doing it all right it may take multiple attempts to get the timing just right. _________________ reenignE esreveR
Resistance is NOT futile... It's Voltage divided by Current!
Assumptions:
1. Everyone on the forum has read the relevant forum section announcements.
2. For Broadcom section we have ALL at least tried to understand the "Peacock" thread,HERE
What i try:
1. Set static IP 192.168.1.5 Mask: 255.255.255.0
2. i prepare tftp upload stock linksys firmware - (FW_EA6200_1.1.41.164830_prod.img)
3. Run cmd and ping 192.168.1.1 -t
4. when pings get answer from 192.168.1.1 i immediatly press Upgrade in TFTP (i also try some times little before respond)
I get info from TFTP:
Erasing Flash...
Unable to get responses from the server.
Retry (3/3)...
what are the TTL responses? "100" that is the best time to start TFTP
timing can be tricky (very tricky), if you are doing it all right it may take multiple attempts to get the timing just right.
Request timed out.
Request timed out.
Request timed out.
Reply from 192.168.1.1: bytes=32 time=4ms TTL=100
Reply from 192.168.1.1: bytes=32 time=2ms TTL=100
Reply from 192.168.1.1: bytes=32 time=8ms TTL=100
Are you using serial and trying to tftp? Please explain exactly what you are doing carefully. It would appear that you are now connected with serial, as you are getting a 3/3 try response. What commands did you send to the router prior to trying to tftp. Have you read th _________________ SIG:
I'm trying to teach you to fish, not give you a fish. If you just want a fish, wait for a fisherman who hands them out. I'm more of a fishing instructor.
LOM: "If you show that you have not bothered to read the forum announcements or to follow the advices in them then the level of help available for you will drop substantially, also known as Murrkf's law.."
Are you using serial and trying to tftp? Please explain exactly what you are doing carefully. It would appear that you are now connected with serial, as you are getting a 3/3 try response. What commands did you send to the router prior to trying to tftp. Have you read th
No i trying tftp2.exe with LAN cable
and with serial i have also problem ... because
Serial pins:
nr1 GND
nr2 1.1-2.0 mV
nr3 3,3V
nr4 3,3V
pin.nr2 looks like damaged
So looks like my EA6200 --- RIP ---
P.S.
For linksys EA6200 if update OEM firmware to "FW_EA6200_1.1.41" then ssh access is open !