Best and newest kong build for R7000 (Solved)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
Gear82
DD-WRT Novice


Joined: 09 Jul 2019
Posts: 3

PostPosted: Thu Jul 18, 2019 18:30    Post subject: Best and newest kong build for R7000 (Solved) Reply with quote
Hey.
Pretty new to this forum, and dd-wrt itself, and still having some trouble on here, so if this is in the wrong forum, then I would like to be told where I should post this instead :)

I have an Netgear R7000 running on build 40189 (07/04/19), which I believe is a brainslayer build.

When I first flashed my router from stock to dd-wrt, I ended up with a build from Kong (build unknown), and then spontaneously updated to the one I am currently running on.
I would like to go back to a build by Kong, but I just have a hard time figuring out what/where to download. I have read somewhere on here that you have to use a .bin file to update, when you are already running dd-wrt. But where I have been looking in kongs builds, I haven't found a .bin for R7000. Only R7000P.
Is that because I do not need to use a .bin for a build by kong?
And in my case, going from a brainslayer build to a kong build.
And also where you can find the stable builds. Not ready for testing yet :)
If anyone could shred some light on how I should approach this, it would be gladly appreciated.

This is where I am looking for a build for my router:
http://www.desipro.de/


Last edited by Gear82 on Sat Jul 20, 2019 12:46; edited 1 time in total
Sponsor
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1522
Location: WCentral Indiana USA

PostPosted: Thu Jul 18, 2019 18:59    Post subject: Reply with quote
Read here:
http://www.desipro.de/ddwrt/K3-AC-Arm/Supported%20Models

Your file is here:
http://www.desipro.de/ddwrt/K3-AC-Arm/
File in test folder is newest build.

Older <Kong> files are found here:
http://ddwrt-kong.clonevince.fr/

_________________
STUBBY DoT install guide----Forum Guide Lines (Please read!) --- How to get help the right way----PIA Setup Guide by egc----Reports
Gear82
DD-WRT Novice


Joined: 09 Jul 2019
Posts: 3

PostPosted: Fri Jul 19, 2019 6:36    Post subject: Reply with quote
bushant wrote:
Read here:
http://www.desipro.de/ddwrt/K3-AC-Arm/Supported%20Models

Your file is here:
http://www.desipro.de/ddwrt/K3-AC-Arm/
File in test folder is newest build.

Older <Kong> files are found here:
http://ddwrt-kong.clonevince.fr/



Thank you so much. Now I know where to start :)
CubsWin
DD-WRT Novice


Joined: 30 Aug 2019
Posts: 6

PostPosted: Fri Aug 30, 2019 3:19    Post subject: Reply with quote
I just came here with this same question, but the desipro.de links no longer appear to be valid. Can anyone point me to an active link for the most stable R7000 build? Thanks!
Malachi
DD-WRT Guru


Joined: 17 Jul 2012
Posts: 7221
Location: Columbus, Ohio

PostPosted: Fri Aug 30, 2019 9:31    Post subject: Reply with quote
CubsWin wrote:
I just came here with this same question, but the desipro.de links no longer appear to be valid. Can anyone point me to an active link for the most stable R7000 build? Thanks!


http://ddwrt-kong.clonevince.fr/

_________________
I am far from a guru, I'm barely a novice.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum