Joined: 02 Aug 2016
|Posted: Sun Aug 18, 2019 14:55 Post subject: Radius Server not seening auth requests from wifi clients.
at the moment I use the DDWRT freeradius with EAP-TLS.
But I want to integrate a radius server.
Network1: DDWRT Freeradius (working)
GuestNetwork: Virtual AP WPA2 isolated network. (working)
Network2: DDWRT Freeradius (working)
Testnetwork: Virtual AP for 5GHz WIFI
- Configured to WPA2 it is working.
- Configured to WPA2 Enterprise / WPA2 Enterprise Mixed or Radius - not working.
My Radius Server is configured and "radtest user password 192.168.0.100 1812 MySecret" from router SSH shell gives me access accept message.
The radius tab in Wireless config is also filled with correct values.
When I try to connect to the virtual WIFI Testnetwork by any client I don't see any response on the radius server side using "radiusd -X". During radtest I see response.
Is there a problem using ddwrt internal freeradius and external radius server at the same time, I also tested if the radius accept requst is caught by the ddwrt internal radius service, by using "radiusd -d /jffs/etc/freeradius -X" but the request are also not seen there.
Wireless security of testnetwork is configured to external Radius server IP and port 1812, shared secret is correct.
I also tried to configure my virtual WIFI adapter to the internal freeradius provided by ddwrt, this also does not seem to work. Seems like virtual APs don't supper WPA2-Enterprise solutions.
Thank you for your help.