Joined: 30 May 2017
Location: Rural Manitoba
|Posted: Sat Aug 17, 2019 18:07 Post subject: WDS Station on WRT1900AC V1 not working with new builds
|Discovered a strange problem with new builds and the 1900 V1 running WDS Station.
I am running r40009 on most of my routers and tried to use WDS for better monitoring on my master. My 3200's work without problem but I could not get the 1900 V1 remote working with WDS.
If I don't activate the 2.4Ghz band (am using 5Ghz for WDS) the connection is established and functions correctly, however when I activate the 2.4Ghz to connect my remote cameras and devices the connection fails and won't connect.
I backed the build off to r35898 and all is well.
I tried the latest build r40634 but the results were the same as with r40009.
This effect is only on the remote as my masters are still on r40009 and only with my 1900 v1. Have not tried to see if the same effect is with the 1200, but I suspect it may also have the problem.
Edit: Tried r40672 , same results
WRT3200acm Master AP 5GHz 160Mhz CH 32 r42514
2.4Ghz G only wmm disabled (for Sonoff Compatability)
WRT3200acm Client Bridged r42514
WRT1900Ac V1 AP 5Ghz r42514
A/C Only CH149 (UU+6) VHT80
(Defective, no 2.4Ghz but 5Ghz works great)
WRT1900AC V1 5Ghz A/C Only 80Mhz Client Bridged r42514
2.4Ghz AP Ch11 20Mhz
WRT1900AC V1 SPARE r42410
WRT1200AC V1 Client-Bridge r42514
WRT54G DD-WRT v3.0-r37305 micro Client-Bridged for 1 IP Camera
EX6200 DD-WRT r38535 - Spare
EX7000 Stock Firmware Spare
Devices and Cameras and Sensors
15 WiFi cameras, 4 desktops, 2 laptop, 12 Sonoff Basic/TH16, Artisan 700 Printer, Ongoing testing of other devices.