OpenVPN CLIENT works fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
NAS via USB Samba also working fine
Flashed this working good so far _________________ Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021 SVN Timeline:
https://svn.dd-wrt.com/timeline Commands: Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &
WRT1900ACv1: WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
WRT3200ACM r40527 Chrome 76.0.3809.87 (64-bit) webflash
Used ubootenv set boot_part method
OpenVPN Client working after manual restart (ExpressVPN)
5GHz & 2.4GHz working, AC/N-Mixed 160MHz & N/G-Mixed 40MHz
VAP/Guest network working (using PBR to bypass VPN)
Samba NAS working after manual restart
SFE now working with PBR! Although I do not know how to confirm that SFE is actually running, given the GUI issues.
I have a wrt32x,
ath0 mixed, full 20 MHz, auto channel.
ath1 mixed, full 20 MHz, auto channel.
ath2 off.
The firmware loaded fine but internet only works when I do not use samba. Once I turn on samba the internet stops working.
My hard drive has 3 partitions, 1st partition is formatted as ext4, 2nd partition is NTFS, and 3rd partition is not formatted at all.
Anybody have any ideas what I need to do to fix this?
When I turn on usb, it recognizes the hard drive fine and the three partitions. It seems like the internet still works. Once I turn on samba the internet stops working and I have to turn off samba and the usb and then reboot to get the internet to start working again.
Joined: 04 Aug 2012 Posts: 612 Location: behind the screen
Posted: Sun Aug 04, 2019 23:07 Post subject:
ed2019 wrote:
I have a wrt32x,
ath0 mixed, full 20 MHz, auto channel.
ath1 mixed, full 20 MHz, auto channel.
ath2 off.
The firmware loaded fine but internet only works when I do not use samba. Once I turn on samba the internet stops working.
My hard drive has 3 partitions, 1st partition is formatted as ext4, 2nd partition is NTFS, and 3rd partition is not formatted at all.
Anybody have any ideas what I need to do to fix this?
When I turn on usb, it recognizes the hard drive fine and the three partitions. It seems like the internet still works. Once I turn on samba the internet stops working and I have to turn off samba and the usb and then reboot to get the internet to start working again.
Joined: 04 Aug 2018 Posts: 1447 Location: Appalachian mountains, USA
Posted: Mon Aug 05, 2019 14:54 Post subject:
Adamcarter wrote:
Linksys 3200acm
Rest in pieces.
Time to upgrade to synology.
What does this mean? Did you flash this new release? If so, what happened?
Or are you just crabbing (justfiably, apparently, given the driver issues in that router) about the WRT3200acm situation in general? _________________ 2x Netgear XR500 and 3x Linksys WRT1900ACSv2 on 53544: VLANs, VAPs, NAS, station mode, OpenVPN client (AirVPN), wireguard server (AirVPN port forward) and clients (AzireVPN, AirVPN, private), 3 DNSCrypt providers via VPN.
Just crabby. I’m waiting for synology to release a newer model. I love the 2600ac i bought for my parents house. But it’s 2 years old tech. _________________ WRT3200ACM V1 r39267 std (03/22/19) OpenVPN client
Posted: Tue Aug 06, 2019 10:01 Post subject: bug in openvpn client configuration page
There is a bug in the openvpn client configuration page.
If you change your vpn ip address in the vpn client configuration and then if you press to the apply button, in fact it does not apply the new configuration and you have to press to the apply button one more time, otherwise it does not connect to vpn service.
Posted: Tue Aug 06, 2019 12:28 Post subject: Re: bug in openvpn client configuration page
The same bug also exists in r40559...
dyilmaz wrote:
There is a bug in the openvpn client configuration page.
If you change your vpn ip address in the vpn client configuration and then if you press to the apply button, in fact it does not apply the new configuration and you have to press to the apply button one more time, otherwise it does not connect to vpn service.
Will 40527 Actually fit in both partitions on my 1200v2?
If not what is the last build that will fit? Or is that not a real problem now?
And are its oVPN & oSSL versions the latest?
Sam _________________ multi-tier router stack
wrt 3200's for speed & cpu power, NG R6300v2's for WiFi AP's,
wrt 1200v2 for one of my secure subnets.
wrt54GLs for ad'l 3rd tier machines.
