Prolly just whatever works good for your setup and suits you
my main router, EA8500, 2.4 = 181 and 5GHz = 193
my two WDS bridges (one is broadcom 54G routers other is atheros N routers) that have been up for years
and only bridged to each other with only wired WAPs and other wired clients.
all their 'Beacon Interval' set at 983
Prolly just whatever works good for your setup and suits you
my main router, EA8500, 2.4 = 181 and 5GHz = 193
my two WDS bridges (one is broadcom 54G routers other is atheros N routers) that have been up for years
and only bridged to each other with only wired WAPs and other wired clients.
all their 'Beacon Interval' set at 983
how about each DTIM interval? _________________ シンゴ
The theory is that if you use a prime number, the statistical probability of ever overlapping with a neighbor, or your own beacon on the other wifi radio in your own router, never occurs. _________________ [r9000] running BS 40634
[EA8500] running Kong 39705
[R7800] KONG PRO [taking a nap...no qam256...]
[WDR3600] BS 36808
The theory is that if you use a prime number, the statistical probability of ever overlapping with a neighbor, or your own beacon on the other wifi radio in your own router, never occurs.
this is perfect, let me study first!!!
if on 2.4ghz i have 6+ devices but all devices only smart home devices, and <6 clients for 5ghz
what is your recommendations? for the settings? _________________ シンゴ
if on 2.4ghz i have 6+ devices but all devices only smart home devices, and <6 clients for 5ghz
what is your recommendations? for the settings?
As suggested above, pick some values and see how they work in your environment. The DSLREPORTS link helps answer your question too... _________________ [r9000] running BS 40634
[EA8500] running Kong 39705
[R7800] KONG PRO [taking a nap...no qam256...]
[WDR3600] BS 36808
