New Build 07-12-2019-r40276

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Goto page 1, 2  Next
Author Message
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 113
Location: FL

PostPosted: Fri Jul 12, 2019 19:14    Post subject: New Build 07-12-2019-r40276 Reply with quote
Downloads:
http site: https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/07-12-2019-r40276/
ftp site: ftp://ftp.dd-wrt.com/betas/2019/07-12-2019-r40276/

SVN Timeline:
https://svn.dd-wrt.com/timeline

Alternate Flash Method required for me. (tried firefox and opera)

"shahabkhan99" method
go to Administrator>Command (paste this)
1: ubootenv set boot_part 2
2: DO NOT REBOOT
3: Flash new WEBFLASH from Firmware Upgrade - DO NOT RESET.

I personally used the console to do it.
ubootenv get boot_part ( says 1 )
ubootenv set boot_part 2
cd /tmp
wget firmware from ftp site.
write frimware linux
reboot

_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2019
SVN Timeline:
https://svn.dd-wrt.com/timeline
Issues:
1. VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
ALTERNATE for VAP issue run command ifconfig ath0.1 down then ifconfig ath0.1 up ( works better for me )

Linksys WRT1900ACv1 08-06-2019-r40559
WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel 6, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 80mhz channel width, channel 100+6, WPA2-CCMP-128.
Misc Info: Wireless Mode: "Client" WPA2 Personal: "CCMP-128 (AES)", Virtual Wireless AP "2.4 + 5ghz", Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv.


Last edited by PIZZEDMEOFF on Fri Jul 12, 2019 19:41; edited 2 times in total
Sponsor
gufus
DD-WRT Guru


Joined: 04 Aug 2012
Posts: 545
Location: behind the screen

PostPosted: Fri Jul 12, 2019 19:32    Post subject: Reply with quote
Webflash worked with

Google Chrome
Version 75.0.3770.100 (Official Build) (64-bit)

_________________
WRT3200ACM dd-wrt r40559
WRT1900AC openwrt 18.06.4
WRT54GL dd-wrt r21676
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 113
Location: FL

PostPosted: Fri Jul 12, 2019 19:39    Post subject: Reply with quote
I opened a ticket to make them aware we must be at the limit, I sat here reflashing over and over and sometimes it goes, and sometimes it does not.. same with last build. since some of us are not having issues and some are so i just wanted to make them aware. who knows..... shrug.
_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2019
SVN Timeline:
https://svn.dd-wrt.com/timeline
Issues:
1. VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
ALTERNATE for VAP issue run command ifconfig ath0.1 down then ifconfig ath0.1 up ( works better for me )

Linksys WRT1900ACv1 08-06-2019-r40559
WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel 6, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 80mhz channel width, channel 100+6, WPA2-CCMP-128.
Misc Info: Wireless Mode: "Client" WPA2 Personal: "CCMP-128 (AES)", Virtual Wireless AP "2.4 + 5ghz", Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv.
Monza
DD-WRT User


Joined: 01 Jul 2018
Posts: 67

PostPosted: Fri Jul 12, 2019 23:16    Post subject: Reply with quote
WRT1200ac v1 - same as previous release - Reported success but came up in r40188.

I did not have to reboot with this release like previous it just came up with the same release I was running prior to the update.
nickant
DD-WRT User


Joined: 09 Feb 2016
Posts: 130

PostPosted: Sat Jul 13, 2019 1:20    Post subject: Reply with quote
WRT1900ACv1
I also couldn't flash from r40188 to r40276 - it would restart without changing.
I used the command in the first post:
ubootenv set boot_part 2
Success!

_________________
------------------------------------
Linksys EA8500 DD-WRT r40672 (Gateway + OpenVPN Client)
Linksys WRT1900ACv1 DD-WRT r40672 (AP)
Photos: https://www.flickr.com/photos/nickant44/albums
Ah-Pin-Kor
DD-WRT User


Joined: 19 Sep 2015
Posts: 262

PostPosted: Sat Jul 13, 2019 2:21    Post subject: Reply with quote
These are the filesizes of webflash.bin for WRT1900ACSV2 since 40134:

39,325,696 40134--ddwrt-linksys-wrt1900acsv2-webflash.bin
39,456,768 40167--ddwrt-linksys-wrt1900acsv2-webflash.bin
39,718,912 40189--ddwrt-linksys-wrt1900acsv2-webflash.bin
39,718,912 40260--ddwrt-linksys-wrt1900acsv2-webflash.bin
39,718,912 40276--ddwrt-linksys-wrt1900acsv2-webflash.bin

40167 was the last version that flashed without complaints but it has webui problem.
From 40189 onwards, people were reporting flashing difficulties.

_________________

Netgear R7800 kongpro 19.07 20190711 || Netgear R7000 36070M kongac (Client Bridge=5GHz, AP=2.4GHz with bridged VAP)
Linksys WRT32X davidc502 OpenWrt || Linksys WRT1200ACv1 Gargoyle 1.11.x
Linksys WRT1900ACSv2 dd-wrt 39956
WENED
DD-WRT User


Joined: 30 May 2017
Posts: 294
Location: Rural Manitoba

PostPosted: Sat Jul 13, 2019 2:36    Post subject: Reply with quote
nickant wrote:
WRT1900ACv1
I also couldn't flash from r40188 to r40276 - it would restart without changing.
I used the command in the first post:
ubootenv set boot_part 2
Success!


Just tried on my 1900 V1. Same results.
It seems these recent builds will only load into Partition 1

_________________
WRT3200acm Master WDS AP 5GHz 160Mhz r40009
WRT3200acm WDS Station r40009
WRT1900Ac V1 WDS AP 5Ghz r40009 (Defective, no 2.4Ghz but 5Ghz works great)
WRT1900AC V1 WDS Station r35898
WRT1900AC V1 SPARE r40672
WRT1200AC V1 Client-Bridge r40009
WRT54G DD-WRT v3.0-r37305 micro Client-Bridged for 1 IP Camera
EX6200 DD-WRT r38535 - Spare
EX7000 Stock Firmware Spare
Devices and Cameras and Sensors
15 WiFi cameras, 4 desktops, 2 laptop, 12 Sonoff Basic/TH16, Artisan 700 Printer, Ongoing testing of other devices.
dyilmaz
DD-WRT Novice


Joined: 26 Aug 2016
Posts: 33

PostPosted: Sat Jul 13, 2019 9:33    Post subject: It works fine on WRT1900ACS V2 Reply with quote
Everything works fine on my WRT1900ACS V2.
Upgrade was completed successfully.
scar1943
DD-WRT User


Joined: 10 Nov 2018
Posts: 150
Location: South Carolina

PostPosted: Sat Jul 13, 2019 14:03    Post subject: DD-WRT v3.0-r40276 std (07/12/19) Reply with quote
WRT3200ACM V1 r40276 Firefox 68 (64-bit) webflash

OpenVPN CLIENT works fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
NAS via USB Samba also working fine
RotoBill
DD-WRT Novice


Joined: 13 Feb 2019
Posts: 22

PostPosted: Sat Jul 13, 2019 15:09    Post subject: Reply with quote
I too have been unable to make the last two versions work on my 3200 with NordVPN. Specifically any device listed in my PBR list won't connect. Since I have a large list of static leases, I always avoid doing a reset.

I do like to stay up to date and again I thank BS and all the super users, but I'm staying with 6-27-19.
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 112

PostPosted: Sat Jul 13, 2019 20:23    Post subject: Reply with quote
Updated with FF 68.0x64. Usual flash and reboot time. No issues and all functions working.
_________________
LinkSys WRT3200ACM
DD-WRT v3.0-r40672 std (08/16/19)
DNSMasq,Local DNS
CloudFlare DNS
ExpressVPN OpenVPN Client
Static Leases & DHCP
2.4 & 5GHz clients
Comcast 1Gbps/35Mbps
gufus
DD-WRT Guru


Joined: 04 Aug 2012
Posts: 545
Location: behind the screen

PostPosted: Sat Jul 13, 2019 23:53    Post subject: Reply with quote
I'ed like 2 see a offical Version

beta testing started /betas/2015/08-25-2015 4 the Linksys WRT AC Series

_________________
WRT3200ACM dd-wrt r40559
WRT1900AC openwrt 18.06.4
WRT54GL dd-wrt r21676
d0ug
DD-WRT Guru


Joined: 31 Jul 2015
Posts: 749

PostPosted: Sun Jul 14, 2019 0:44    Post subject: Reply with quote
gufus wrote:
I'ed like 2 see a offical Version

beta testing started /betas/2015/08-25-2015 4 the Linksys WRT AC Series


There is no such thing as a non-beta dd-wrt release. ddwrt is in perpetual beta mode. Basically a way of disclaiming any liabilities of you putting ddwrt on a production mission critical network without fully vetting the build yourself.

That said ddwrt is still in general more stable and robust than the garbage stock firmware in most SOHO routers.
scar1943
DD-WRT User


Joined: 10 Nov 2018
Posts: 150
Location: South Carolina

PostPosted: Sun Jul 14, 2019 0:56    Post subject: Reply with quote
d0ug wrote:


There is no such thing as a non-beta dd-wrt release. ddwrt is in perpetual beta mode. Basically a way of disclaiming any liabilities of you putting ddwrt on a production mission critical network without fully vetting the build yourself.

That said ddwrt is still in general more stable and robust than the garbage stock firmware in most SOHO routers.


Agreed. I tend to make notes of each release, and keep a copy. I have a few "favorites" and when things act up, I jump on back to that last favorite.
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 113
Location: FL

PostPosted: Sun Jul 14, 2019 12:25    Post subject: Reply with quote
can one of you 3200 guys chime in on this post...
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320485
i am unsure of what older build he should flash from to go from factory to ddwrt.. thx.

_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2019
SVN Timeline:
https://svn.dd-wrt.com/timeline
Issues:
1. VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
ALTERNATE for VAP issue run command ifconfig ath0.1 down then ifconfig ath0.1 up ( works better for me )

Linksys WRT1900ACv1 08-06-2019-r40559
WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel 6, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 80mhz channel width, channel 100+6, WPA2-CCMP-128.
Misc Info: Wireless Mode: "Client" WPA2 Personal: "CCMP-128 (AES)", Virtual Wireless AP "2.4 + 5ghz", Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum