Posted: Tue Jul 09, 2019 10:37 Post subject: Re: Need serious help on "resetting" ASUS RT-AC320
Ever since I tried flashing the AC3200 with r40065. My router hasn't been able to use the DD-WRT ANY firmware. I have tried r40137 & r40189
Basically ever since r40065 that firmware has disabled port 1 and WAN port, when I am on DDWRT firmware.
This is what I have done so far on resetting the NVRAM. Which still disable port1 and WAN Port.
1) Flash back to ASUS original firmware and did a 'nvram erase' and 'mtd-erase2 nvram'
2) DDWRT using reset back to factory and also 'nvram erase'
3) holding WPS
4) 30-30-30 Reset
5) I tried going back to r40009 firmware
none of that will let me use DDWRT correctly. Do note that running stock ASUSWRT firmware everything works perfectly fine. It's as if 'something' written by DDWRT isn't being erased correctly.
Any other suggestion would be appreciated.
Paste these commands and press the Run Commands button, router will restart.
nvram set vlan1ports="1 2 3 4 5*"
nvram set vlan2ports="0 5u"
_________________ ASUS Tri-Band Gigabit (RT-AC3200 H/W Ver R4.12 & F/W Ver 378), BCM4709 OC 1.4 GHz ARM® Cortex™-A9 dual-core, 256MB of DDR 3 RAM, 128MiB of flash storage, and 64/128kB nvram. Six detachable antennas (three receive and three transmit)
ASUS Tri-Band Gigabit (RT-AC5300 H/W Ver R1.31 & F/W Ver 384), BCM4709C0_1.4 GHz ARM® Cortex™-A9 dual-core, 512MB of DDR 3 RAM, 128MiB of flash storage, and ___128kB nvram. Eight detachable antennas (four receive and four transmit)