New Build 40167: BS 06-30-2019-r40167

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 389

PostPosted: Sun Jun 30, 2019 22:03    Post subject: New Build 40167: BS 06-30-2019-r40167 Reply with quote
Downloads: (if a link doesn't work, try another)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/06-30-2019-r40167/
ftp://ftp.dd-wrt.com/betas/2019/06-30-2019-r40167/
Alternate link: DD-WRT website
Note: to use wget (or curl) for CLI flash (`write {f/w} linux`), change the https to http (or use ftp instead)

Changelogs:
SVN* changelog since last build: 40134
Summary: (deprecated after 29739)
*Github mirror: https://github.com/mirror/dd-wrt/

Notes:
1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer
2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use build 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. Since 39469, udhcpd was removed and replaced with the already present dnsmasq, and PIE qdisc was added for some builds.
5. Policy-Based Routing with SFE enabled was fixed in r39556: 5986 and 5900
6. k2.4 (broadcom/) builds were fixed in 39715 (broken in 39144 through 39654)
7. SFE update (k3.10+ for BCM) was in the 39927 build.


Issues, observations, and/or workarounds reported:
1. Trendnet 81*DRU models are missing factory-to-flash
2. DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use: 6246
3. WDS does not work on Broadcom ARM devices (only MIPS<->MIPS)
4. K2.6 builds are broken since 38253(?); GUI issues: 6538
5. VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
This appears to be fixed for some routers (different kernels, modes, and radios) since build 39508.

Important: if any issues are found, please provide log info (GUI syslog, `dmesg`, `cat /var/log/messages`).
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).

Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
[b]Router/Version: [/b]
[b]File: [/b]
[b]Kernel: [/b]
[b]Mode: [/b]
[b]Status: [/b]

WARNING: This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build.
Sponsor
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 389

PostPosted: Sun Jun 30, 2019 22:08    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r40167 std (06/30/19)
Kernel: Linux 4.4.184 #347 SMP PREEMPT Sun Jun 30 09:29:35 CEST 2019 armv7l
Previous: r40134
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working so far.


Uptime: 21min
Temperatures: CPU 69.1 °C / WL0 48.5 °C / WL1 54.3 °C
Valeriy_tc
DD-WRT User


Joined: 03 Sep 2016
Posts: 53
Location: Ukraine

PostPosted: Sun Jun 30, 2019 22:11    Post subject: Linksys EA6400 Reply with quote
Router/Version: Linksys EA6400
File: DD-WRT v3.0-r40167 std (06/30/19)
Kernel: Linux 4.4.184 #347 SMP PREEMPT Sun Jun 30 09:29:35 CEST 2019 armv7l
Mode: Gateway/Router/Port Forwarding
Reset: No
Status: No issues so far.
SinCalChewy
DD-WRT User


Joined: 09 Nov 2014
Posts: 307
Location: Bakersfield, CA

PostPosted: Sun Jun 30, 2019 22:13    Post subject: Reply with quote
Router/Version: 2x Linksys E3000
Firmware: dd-wrt.v24-40167_NEWD-2_K3.x_mega-e3000.bin
Previous: dd-wrt.v24-40134_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.108-d8 #25173 Sun Jun 30 15:54:36 CEST 2019 mips
Mode: Client Bridges
Status: So far so good, been running it since it's been uploaded to the ftp. :)

_________________

Deployed Routers:
Netgear R7000 - 3x build 43171M (Gateway: DoT/DoH, CAKE QoS, USB /w Entware)
Linksys E3000 - 2x build 43171M (Client Bridges)

Spares/Backups/Collection:
Too many to list. I have old routers, bricked routers, weird routers. You name it.


Last edited by SinCalChewy on Mon Jul 01, 2019 9:49; edited 1 time in total
wuruxu
DD-WRT Novice


Joined: 17 Jun 2019
Posts: 15

PostPosted: Sun Jun 30, 2019 23:34    Post subject: Reply with quote
Router/Version: Linksys EA6300
File: DD-WRT v3.0-r40167 std (06/30/19)
Kernel:
Mode: Gateway/Router/Port Forwarding
Previous: Firmware: DD-WRT v3.0-r39927 std (06/03/19)
Reset: No
Status: this firmware Cann't boot correctly, I have try to flash via command mtd or upgrade.asp to flash firmware r40167 and r40134, both cann't boot correctly, but r40065 is work very well.
It's very strange
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 6367
Location: Texas, USA

PostPosted: Mon Jul 01, 2019 2:11    Post subject: Cisco Linksys E4200 v1 Reply with quote
Router/Version: Cisco Linksys E4200 v1
File: dd-wrt.v24-40167_NEWD-2_K3.x_mega-e4200.bin
Firmware: DD-WRT v3.0-r40167 mega (06/30/19)
Kernel: UNK (see below)
Previous: DD-WRT v3.0-r40065 mega (06/20/19)
Reset: No
Mode: Gateway/AP
Uptime: 0
Status: Bricked; reverted back to DD-WRT v3.0-r40065 mega (06/20/19)
Issues/Errors:

See attached logs. I could've tried to flash from 35531 K3.x during recovery process, but I chose not to. Seems like there's some commits that need to be reverted. I guess I will find out if the GTK renewal interval bug is still present as I didn't change that. Yet. Wink Rolling Eyes



r40167.reboot.serial.txt
 Description:

Download
 Filename:  r40167.reboot.serial.txt
 Filesize:  10.47 KB
 Downloaded:  158 Time(s)


r40065_r40167.serial.txt
 Description:

Download
 Filename:  r40065_r40167.serial.txt
 Filesize:  26.74 KB
 Downloaded:  187 Time(s)

parco
DD-WRT User


Joined: 10 Sep 2017
Posts: 100

PostPosted: Mon Jul 01, 2019 16:43    Post subject: Reply with quote
@kernel-panic69

What is the Network paramenters "TX Queue Length" for actually? Does it improve anything if I modify "TX Queue Length" for eth and vlan? Confused
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 6367
Location: Texas, USA

PostPosted: Mon Jul 01, 2019 19:07    Post subject: Reply with quote
parco wrote:
@kernel-panic69

What is the Network paramenters "TX Queue Length" for actually? Does it improve anything if I modify "TX Queue Length" for eth and vlan? Confused


I sent you a pm.

Back to topic, I am trying to think of what may have caused my brick other than a bad flash OR the threading changes to httpd OR something else. I have another test unit I can check with, it's already serial recovery ready.

EDIT: Looks like perhaps the problem was fixed and should be good in next build https://svn.dd-wrt.com/changeset/40182. However, the actual problem for N-devices with dual band is that the default vlan settings and some other things are incorrect and haven't been fixed in public betas, but I have no GLUE Rolling Eyes I guess if I were to reset to defaults or try flashing this build on the test bench unit and not touch the vlans page whatsoever, if might be fine Cool Shocked Question Idea
wicket
DD-WRT Novice


Joined: 18 Jul 2017
Posts: 41
Location: Wisconsin, USA

PostPosted: Tue Jul 02, 2019 15:48    Post subject: Bricked - Don't Flash to EA6500 V1 Reply with quote
I've been sitting here quietly updating my firmware every release and for awhile things have been good but I thought I would chime in. This release (40167) and the one before (40134) both bricked my device. I was able to recover by using TFTP in both cases. I have also been rolling back to 40065 as it is stable

Router/Version: Linksys EA6500 v1
Firmware: Firmware: DD-WRT v3.0-r40167 giga (06/30/19)
Kernel: Unknown as it wont boot.
Previous: DD-WRT v3.0-r40065 giga (06/20/19)
Mode/Status: Gateway/AP
Setup: Using IPv6 via DNSMasq, DDNS, & Port Range Forward.
Reset: No
Issues/Errors: Device Bricked with both versions 40134 & 40167

_________________
jwbraun
DD-WRT Novice


Joined: 22 Jun 2018
Posts: 18

PostPosted: Tue Jul 02, 2019 17:50    Post subject: Reply with quote
Router/Version: Asus RT-AC1900P
File: asus_rt-ac1900p-firmware.trx
Kernel: Linux 4.4.184 #347 SMP PREEMPT Sun Jun 30 09:29:35 CEST 2019 armv7l
Mode: Gateway/AP
Reset: No
Uptime: ~20 hours
Status: OK
benguild
DD-WRT Novice


Joined: 30 Jun 2019
Posts: 14

PostPosted: Wed Jul 03, 2019 2:10    Post subject: Reply with quote
Router/Version: Asus RT-AC3100
File: 2019-06-30_asus_rt-ac3100-firmware.trx
Kernel: Linux 4.4.181-rc1 #222 SMP PREEMPT Tue Jun 11 16:30:33 CEST 2019 armv7l
Mode: Gateway/Repeater
Reset: No
Uptime: ~1 hours
Status: Was seeing significantly slower speeds across repeated network. Downgraded to r40009 without reset and problem went away.

_________________
https://benguild.com
benguild
DD-WRT Novice


Joined: 30 Jun 2019
Posts: 14

PostPosted: Wed Jul 03, 2019 2:11    Post subject: Reply with quote
Router/Version: Asus RT-AC3100
File: 2019-06-30_asus_rt-ac3100-firmware.trx
Kernel: Linux 4.4.181-rc1 #222 SMP PREEMPT Tue Jun 11 16:30:33 CEST 2019 armv7l
Mode: Gateway/Repeater
Reset: No
Uptime: ~1 hours
Status: Was seeing significantly slower speeds across repeated network. Downgraded to r40009 without reset and problem went away.

_________________
https://benguild.com
denislen
DD-WRT User


Joined: 16 Sep 2015
Posts: 50

PostPosted: Thu Jul 04, 2019 12:26    Post subject: Reply with quote
40065 works great for asus rt-n10u b1

still no usb flash support
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 6367
Location: Texas, USA

PostPosted: Thu Jul 04, 2019 14:20    Post subject: Reply with quote
denislen wrote:
40065 works great for asus rt-n10u b1

still no usb flash support


No ext2, ext3, ext4 filesystem support, but I am willing to wager that there is fat and ms-dos filesystem support, and possibly ntfs. Only way to add ext* filesystem support is to lose another feature or package or something. Not a new issue:

https://svn.dd-wrt.com/ticket/5338
https://svn.dd-wrt.com/ticket/5467
https://svn.dd-wrt.com/ticket/6249
https://svn.dd-wrt.com/ticket/6507

From the man himself (BrainSlayer):

https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1165077#1165077
parco
DD-WRT User


Joined: 10 Sep 2017
Posts: 100

PostPosted: Thu Jul 04, 2019 15:51    Post subject: Reply with quote
kernel-panic69 wrote:
parco wrote:
@kernel-panic69

What is the Network paramenters "TX Queue Length" for actually? Does it improve anything if I modify "TX Queue Length" for eth and vlan? Confused


I sent you a pm.

Back to topic, I am trying to think of what may have caused my brick other than a bad flash OR the threading changes to httpd OR something else. I have another test unit I can check with, it's already serial recovery ready.

EDIT: Looks like perhaps the problem was fixed and should be good in next build https://svn.dd-wrt.com/changeset/40182. However, the actual problem for N-devices with dual band is that the default vlan settings and some other things are incorrect and haven't been fixed in public betas, but I have no GLUE Rolling Eyes I guess if I were to reset to defaults or try flashing this build on the test bench unit and not touch the vlans page whatsoever, if might be fine Cool Shocked Question Idea
thank you! just replied yours
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum