Posted: Mon Jul 08, 2019 22:57 Post subject: Re: tl-mr3420v1
kretex wrote:
Sir...I flash from factory using factory-to-ddwrt.bin was succest and than try flash from webgui tl-mr3420v1-webflash.bin not working. I try flash webflash.bin using command line using winscp/putty see on picture. is this oke sir?? sorry for nob question.
I don't have that router but if that's the right file for the router it looks correct to me.
Last edited by bdg2 on Wed Jul 10, 2019 11:50; edited 1 time in total
Router: TL-WDR3600 v1
Firmware: tl-wdr3600-webflash.bin (v3.0-r40189 std)
Status: working
Reset: No
USB: perfect on ext4 hdd
NAS: perfect
WLAN 5 Ghertz: not working.
* Windows 10 PC sees network but cannot connect
* Libreelec PC does not see 5 Ghertz network
* Debian Laptop does not see 5 GHertz network
Also related light on router for the 5GHz band is off.
Both 2.4 GHz and 5 GHz bands set as AP's.
WPA2 Personal and AES
Different SSID's
Posted: Tue Jul 09, 2019 12:11 Post subject: Upgrades
Router/Version: TP-Link Archer C7 v2 x2
Firmware: 40189
Previous: 40167
Mode/Status: WDS AP, WDS Station
Reset: No
Issues/Errors: 2.4GHz wifi was unstable. It would stop transmitted after ~30 min, same issue with 40167. Reverted to 40009.
Router/Version: D-Link DIR-862L A1 x2
Firmware: 40189
Previous: 40167
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far. No WPA3.
Router/Version: D-Link DIR-825 B1
Firmware: 40189
Previous: 40167
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far.
Router/Version: TP-Link WR841ND v8
Firmware: 40189
Previous: 40167
Mode/Status: WDS Station, WDS AP
Reset: No
Issues/Errors: None, so far. No WPA3.
Router/Version: TP-Link WDR3600 v1
Firmware: 40189
Previous: 40167
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far. No WPA3.
Router/Version: D-Link DIR-615 I1
Firmware: 40189
Previous: 40167
Mode/Status: WDS Station
Reset: No
Issues/Errors: None, so far. No WPA3. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
Posted: Wed Jul 10, 2019 10:40 Post subject: Re: Upgrades
ian5142 wrote:
Router/Version: TP-Link Archer C7 v2 x2
Firmware: 40189
Previous: 40167
Mode/Status: WDS AP, WDS Station
Reset: No
Issues/Errors: 2.4GHz wifi was unstable. It would stop transmitted after ~30 min, same issue with 40167. Reverted to 40009.
My 2.4Ghz wifi has been stable for 4 days, no problems exist _________________ Routers:
TP-Link Archer C7 v2-(EU)
TP-Link WR840n v3
TP-Link WR740n v5
#repost
Router Model: TP-Link TL-MR3420 v1
Firmware: DD-WRT v3.0-r40189 std (07/04/19)
Kernel Version: Linux 3.10.108-d8 #13683 Thu Jul 4 04:59:33 CEST 2019 mips
Status: Flash from factory working
Reset: Yes
Errors: Yes
webgui error ( beta firmware from r40009 until r40189
- apply settings button not working
- cannot apply reset to default
- flash firmware upgrade not successt ( only showing progresst bar )
the good news is firmware r39956 is full working no error
Linksys WRT160NL
DD-WRT v3.0-r40189 std (07/04/19)
Linux 3.10.108-d8 #13639 Thu Jul 4 04:11:51 CEST 2019 mips
No rest -- GUI install
switch / smaba share FAT32
uptime 16:45
NO longer requires a power cycle after install like many previous builds.
samba working just fine and also still good after doing a reboot.
Great build on this router.... although ---
this unit has ->Oops: flash id 0x1c2017 .
still will NOT install on my 160NL or E2100L units that have ->Oops: flash id 0xc22017 .
see difference in their MTD parts ---> 'from here' iffin anyone wants to know why.
don't remember any build that will install on them since r34311
might could maybe replace some their MTD parts or complete uboot but don't see the point since
old dd-wrt builds work very good for what I use them for anyways
I spoke to BS about this; can you post the full dmesg from the two units that won't update? _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
I also think I am not the only one that has run into this problem ...
...and dunno why the MTD blocks are slightly different on these silly routers
alright then 'here is full dmesg' from good 160NL and the non upgradable one.
Also dmesg from one of the WDS E2100L that is always in use using old 2005 build....they's WDS stable with old r27506
My two E200L units are just same as two of my 160NL non upgradable units.
ok, jwh7
alright then I got this straight now and owe BS an apology. ....imma dumbass I reckon ---
I thought, would have sworn, I had tried this recently but maybe not.
My my ol brain don't work nothing like it used to.
I know I tried this years ago because my old notes say so but that was prolly with whatever old old builds screwed them up in first place.
BS says there were some old bad builds and not just the bad few of last year.
erase linux and tftp r40189 worked like a charm.
Did same with other 160NL but used r40260 and it worked like a charm.
I'll try on the E2100L routers someday if I ever pull them down from their WDS setup.
sorry for nob question. 
no error 
