Posted: Fri Feb 09, 2024 6:32 Post subject: New Build - 02/09/2024 - r55109
Welcome to Marvell r55109 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Linksys WRT1900ACS v2
File: ddwrt-linksys-wrt1900acsv2-webflash.bin
Firmware: DD-WRT v3.0-r55109 std (02/09/24) (prev. DD-WRT v3.0-r55052 std (02/02/24))
Kernel: Linux 6.1.77 #289 SMP Fri Feb 9 03:56:01 +07 2024 armv7l
Mode: Gateway, SFE disabled, QoS in use, Wifi disabled, Wireguard for external access, WAN to DSL Modem, samba to access USB3-ext4 SSD, Keep Alive reboot 5:00 in the morning, using my own local NTP
Reset: No
Status: Installed today, when I try to copy anything from my Windows Machine using smb to its connected SSD, the router restarts shortly after.
SCP towards the router does work though.
Router/Version: Linksys WRT1200AC v1
File: ddwrt-linksys-wrt1200ac-webflash.bin
Firmware: DD-WRT v3.0-r55109 std (02/09/24) (prev. DD-WRT v3.0-r55052 std (02/02/24))
Kernel: Linux 6.1.77 #289 SMP Fri Feb 9 03:56:01 +07 2024 armv7l
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning, using my own local NTP
Reset: No
Status: Installed today, OK. I did a stresstest and was able to maintain ~190Mbit/s throughput over the course of 15 Minutes via Wireguard. Quite impressive.
Edit 1: I'm still getting random reboots with this version.
Edit 2: I found the couse of reboots: the internal colling fan is giving up! I checked the cpu temperature and it was at 97c. If I give a littler push (blow air) to the internal cooler it start spinning and temperature goes down to 57c, but after a boot it will not spin again unless I give another push... I added an USB fan on the slowest setting blowing air up on top of the unit. It's super silent and the current reading are very stable at: CPU 40.0 °C, DDR 30.2 °C, WLAN 32.0 °C , WLAN0 53.0 °C , WLAN1 55.0 °C
I opened the unit to see if I could replace the fan, but it's screwed from under the headsink (really bad idea IMO) and I will need to spend a long time to do it properly with a potential to disaster. Additionally all termal pads will need to be replaced to achieve this. The USB fan is not the most elegant solution, but it is easier and works!
Last edited by welton on Wed Feb 21, 2024 14:53; edited 3 times in total
Joined: 30 May 2017 Posts: 582 Location: Rural Manitoba
Posted: Sat Feb 10, 2024 1:37 Post subject:
Upgrade went well on 3200. No boot loop apparent. Will continue to monitor before further upgrading.
Thank you for your resolution to the WAN problems with the past few upgrades. _________________ Starlink & DSL -> TPLink TL-R470T+
->
WRT3200acm Master WDS 5GHz 80Mhz CH 100 (+6) r55819
Ath1 2.4Ghz Disabled
99 Static Leases
ExpressVPN
WRT3200acm r55819 WDS Station 5Ghz
Ath1 AP N/G Mixed Channel 11 HT40
WRT1900Ac V1 5Ghz r55819 WDS Station
(Defective, no 2.4Ghz but 5Ghz works great)
WRT1900AC V1 5Ghz AC 80Mhz WDS Station r55819
2.4Ghz AP Ch1 HT20 Mixed
WRT1900ACS SPARE r54914
WRT1900AC SPARE r54914
WRT1900AC V1 5Ghz AC 80Mhz WDS-AP r55819
2.4Ghz AP Ch1 HT20 Mixed
WRT54G DD-WRT v3.0-r37305 micro AP CH 6 Mixed - Not in use
Router/Version: Linksys WRT1900ACS v1
Firmware: DD-WRT v3.0-r55109 std (02/09/24) (prev. DD-WRT v3.0-r55052 std (02/02/24))
Kernel: Linux 6.1.77 #289 SMP Fri Feb 9 03:56:01 +07 2024 armv7l
Mode: Gateway, SFE disabled, No QoS in use, WiFi Scheduled, Neither VPN nor USB (All inside), WAN to cable Modem(DHCP), Keep alive reboot 6:02 every morning
Reset: No
Status: Installed today morning which works 14:30, works stable with adguard dnsproxy 0.65.0 for Quic only from freedns.controld.com (use neither smartdns nor unbound now)
CPU 66.5 °C DDR 52.2 °C
WLAN 53.9 °C WLAN1 57.0 °C WLAN2 61.0 °C
Free 60% 304764 KiB / 509312 KiB
Y is the main block ~19.2MB collected from Hagezi [TLDs;pro.plus(tif.normal,pop-up ads),dvpb,nosafesearch,dyndns,hoster,anti.piracy,gambling; tiktok_extension] plus OISD[nsfw]
I also wonder whether some tiny app like chrony can be added in firmware on WRT1900ACS, or can be download directly from ddwrt without extra entware, as I downloaded adguard dnsproxy. Because I do not want to compile by myself, I really found more https://github.com/mirror/dd-wrt/tree/master/src/router/chrony
Router/Version: Linksys WRT1900ACS v2
File: ddwrt-linksys-wrt1900acsv2-webflash.bin
Firmware: DD-WRT v3.0-r55109 std (02/09/24) (prev. DD-WRT v3.0-r55052 std (02/02/24))
Kernel: Linux 6.1.77 #289 SMP Fri Feb 9 03:56:01 +07 2024 armv7l
Mode: Gateway, SFE disabled, QoS in use, Wifi disabled, Wireguard for external access, WAN to DSL Modem, samba to access USB3-ext4 SSD, Keep Alive reboot 5:00 in the morning, using my own local NTP
Reset: No
Status: Installed today, when I try to copy anything from my Windows Machine using smb to its connected SSD, the router restarts shortly after.
SCP towards the router does work though.
Router/Version: Linksys WRT1200AC v1
File: ddwrt-linksys-wrt1200ac-webflash.bin
Firmware: DD-WRT v3.0-r55109 std (02/09/24) (prev. DD-WRT v3.0-r55052 std (02/02/24))
Kernel: Linux 6.1.77 #289 SMP Fri Feb 9 03:56:01 +07 2024 armv7l
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning, using my own local NTP
Reset: No
Status: Installed today, OK. I did a stresstest and was able to maintain ~190Mbit/s throughput over the course of 15 Minutes via Wireguard. Quite impressive.
This has been a problem since kernel 6.1 for me. SMB seems to somehow trigger random reboots. Currently on the last version with kernel 4.9 because of this.
Router: Linksys WRT1900ACSv2
Firmware: DD-WRT v3.0-r55109 std (02/09/24) from v3.0-r55052
Kernel: Linux 6.1.77 #289 SMP Fri Feb 9 03:56:01 +07 2024 armv7l
Reset:: No.
Mode/Status: SFE disabled
Issues/Errors:
Interesting detail about SMB! I opened an SMB server on another PC, connected a Win10 client to it and... when copying a file (about 3 gigabytes) from the server to the PC, my router rebooted! Those. It’s not a fact that there’s something wrong with SMB on the router, because in my case it just acts as a switch. _________________ Linksys WRT1900ACSv2
Automatically adjustable temperature, always within the range of 59-68°С.
I routinely update my WRT32X to the latest version but for some time I have noticed that STATUS - LAN always shows my DHCP server is enabled with a scope of 192.168.0.64 - .73
In reality my DHCP server is not enabled on my lan and my pihole diagnostics confirm that my WRT32X is not offering addresses on my lan. DHCP is enabled only on my guest wifi with a different scope.
How do I lose this error in the status.
