Joined: 04 Aug 2018 Posts: 216 Location: Appalachian mountains, USA
Posted: Fri Jun 14, 2019 17:50 Post subject:
After upgrading i get a user.err with the dnscrypt resolver and have lost internet connectivity.
-user.err : No resolver named [adguard-dns-ns2] found in the [/etc/dnscrypt/dnscrypt-resolvers.csv] list, unable to read file either and does not have an a config file.
-Unable to save specific options such as disabling dnsmasq and Recursive DNS Resolving (Unbound)
I'm not on this new release yet, but some general points: the last several releases have not had the "Encrypt DNS" button, so if you want DNSCrypt, you'll need an approach using Startup Commands like I described in a post (last one in signature below) in the new-build thread for 39144. (Others before me have discussed it also, in the context of using multiple DNSCrypt instances.)
In DNSMasq settings I enable DNSMasq of course, but the other buttons are optional, except I suspect (not sure) for "Recursive DNS Resolving (Unbound)". That option is used in the DNS-over-TLS approach (more involved than DNSCrypt to set up) discussed in https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1166512. Not sure whether it has other uses also. It may need to stay off to set up DNSCrypt.
Re adguard, the resolver list in my dd-wrt (39144) only includes four options, not including the one you mention:
I use the second one with no problem. Parameters from a newer resolver list you find online can be put on the dnscrypt-proxy command line in Startup Commands. (See my post that I mention above.)
Re file readability... ls -l /etc/dnscrypt/dnscrypt-resolvers.csv shows it not readable? If so, try copying it into /tmp in Startup Commands, marking it readable there, and referencing the copy from the dnscrypt-proxy line you'll use in Startup Commands. (Again see my post that I mention above.)
Good luck. _________________ Five of the Linksys WRT1900ACSv2, on r39144 and r38159. On various: VLANs, client-mode travel router, two DNSCrypt DNS servers (incl Quad9), multiple VAPs, USB/NAS, OpenVPN client (random NordVPN server).
This build fixed my WRT32x 2.4Ghz issues. My Nintendo 3DS now connects flawlessly and WPA2-AES is working too. I previously had to use WPA-AES as enabling WPA2 would crash the interface. _________________ Linksys WRT32X, Linksys EA6500 v1, TP-Link TL-WR842ND
Spectrum 940/35 mbit
Just to inform you that I flashed my wrt3200acm (v2 I think) with the factory-to-ddwrt and for now, it's working fine (less than 1h ..).
My main issue was the scandalous Linksys stock firmware which constantly drop packets getting out through the WAN interface. I can't believe they are not fixing it, fortunately, I planned well before to switch to DD-WRT : it just pushed me to do it.
Router/Version: Linksys WRT1900ACS v2
Firmware: DD-WRT v3.0-r40009 std (06/11/19)
Kernel: Linux 4.9.181-rc1 #1075 SMP Tue Jun 11 13:41:10 CEST 2019 armv7l
Mode: Router, connected via WAN to N66U
Status: looks good so far, 3d uptime.
did not test if wifi settings still behave "strange": https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=319905
I'm fine with flawless doing with mixed 20MHz and ac only 80MHz :D