Joined: 24 Feb 2008 Posts: 95 Location: Winnipeg Canada
Posted: Sun Jun 16, 2019 4:33 Post subject: R7000 Max speed 216.7 Mbps on 2.4Ghz
I upgraded to Kongac 39960M 6/8/19 and for some reason checked the speed of the wifi. Using Acrylic Wi-Fi scanning software it shows the 2.4Ghz for the Netgear 7000 is only capable of 216.7 Mbps.
I have tried changing 40 Mhz without any change. Yet if I have tried fixing the channel to 1 or 11 and no difference. If I enable the Wifi on my ISPs Sagemcom Broadband SAS router its 2.4Ghz shows its speed as 600 Mps.
The R7000 is simply acting as AP with its WAN port disabled and is connected to my wired router
Is this speed slowness a known issue on the R7000 router?
Joined: 18 Mar 2014 Posts: 7742 Location: Netherlands
Posted: Sun Jun 16, 2019 10:07 Post subject:
216,7 is the speed for 20 Mhz channel width
Make sure you have set to 40 MHz channel width, auto channel never works, to set a fixed channel toggle upper/lower while saving, so that you can set a fixed channel.
Make sure security is set to WPA2/AES
Reboot after changing and check if channels are set.