New Build 06-06-2019-r39956

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 244
Location: FL

PostPosted: Thu Jun 06, 2019 13:15    Post subject: New Build 06-06-2019-r39956 Reply with quote
ftp://ftp.dd-wrt.com/betas/2019/06-06-2019-r39956/

Change log
https://svn.dd-wrt.com/timeline

update: For my configuration and needs its working perfectly for about 5 hours now.

_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &

WRT1900ACv1:

WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.


Last edited by PIZZEDMEOFF on Thu Jun 06, 2019 17:57; edited 1 time in total
Sponsor
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1006

PostPosted: Thu Jun 06, 2019 13:51    Post subject: Reply with quote
Updated using FF 67.0.1x64. Routine update process and time to reboot. All functions working.
_________________
Netgear R9000
DD-WRT v3.0-r55363 std (03/13/24)
Linux 4.9.337 #714 SMP Tue Mar 5 13:08:11 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
wilma
DD-WRT Novice


Joined: 27 Jan 2009
Posts: 44

PostPosted: Thu Jun 06, 2019 14:01    Post subject: Reply with quote
Getting closer to flipping the odometer.
giles02134
DD-WRT User


Joined: 25 Feb 2007
Posts: 142

PostPosted: Thu Jun 06, 2019 14:18    Post subject: Reply with quote
Updated using FF 67.0.1 x64 (OS-X).
All appears to be working as it should.

My only issue with the most recent releases has been the scheduled reboot. I've found that if after an upgrade, I change the scheduled time from what was transferred from the previous release, then Apply/Save, it will usually work.

_________________
Router: Linksys WRT1900ACSv2
Modem: Verizon Fios
DD-WRT v3.0-r44048 std (08/02/20)
ISP: Verizon Fios
NAS: ReadyNas314
scar1943
DD-WRT User


Joined: 10 Nov 2018
Posts: 350
Location: South Carolina

PostPosted: Thu Jun 06, 2019 15:59    Post subject: DD-WRT v3.0-r39956 std (06/06/19) Reply with quote
WRT3200ACM V1 r39956 Firefox 67.0 (64-bit) webflash

OpenVPN CLIENT works fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
NAS via USB Samba also working fine
Justanotherbrokenrouter
DD-WRT User


Joined: 27 Apr 2019
Posts: 172

PostPosted: Thu Jun 06, 2019 16:34    Post subject: Reply with quote
Why does everyone still continue to post that everything is working fine? If it is what's the point to continuing script adjustments. I run ISP at 200Mbps/10Mbps, and with the new builds I can only get 75-85Mbps/11Mbps after UDP openvpn is enabled. With recommended builds for the WRT3200ACM from router data base best I can run 140Mbps/12Mbps after UDP openvpn is enabled. Work on download and upload script adjustments instead. ISP still shows in active clients. WiFi on older builds was even running 150Mbps/11Mbps!

Last edited by Justanotherbrokenrouter on Thu Jun 06, 2019 16:44; edited 1 time in total
Justanotherbrokenrouter
DD-WRT User


Joined: 27 Apr 2019
Posts: 172

PostPosted: Thu Jun 06, 2019 16:39    Post subject: Reply with quote
Maybe build r40000 will be a faster build, or wait till v4.0.
RotoBill
DD-WRT Novice


Joined: 13 Feb 2019
Posts: 47

PostPosted: Thu Jun 06, 2019 22:52    Post subject: Reply with quote
Please continue to "Working Fine" or not so... I like to stay with the latest so I much appreciate BrainSlayer's dedication and the "super users" who give us a basic Yay or Nay.
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 244
Location: FL

PostPosted: Fri Jun 07, 2019 3:45    Post subject: Reply with quote
under Status, Wireless, wireless nodes
ath0 20:01:07 2M 216M HT20SGI -68 -97 29

we ever figure out what causes this????

i know you can just hit apply settings under wireless to make it come back from it.....

_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &

WRT1900ACv1:

WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 244
Location: FL

PostPosted: Fri Jun 07, 2019 4:17    Post subject: Reply with quote
RotoBill wrote:
Please continue to "Working Fine" or not so... I like to stay with the latest so I much appreciate BrainSlayer's dedication and the "super users" who give us a basic Yay or Nay.


Thanks rotobill, I know it was not specifically me your talking to but i try check the basic stuff on post..
Tabs working in GUI basic functional stuff and so on.
Then ill come back and post OR update my post as i find things...etc.. i work a lot so sometimes thats all i have time to do at first. so anyway i know its the little posts that help people decide what they are doing.
So anyway thanks for taking the time to say.

ive been around here a long time and didnt make a account till i felt i had time to mess around on the forum ive always been a I.T. guy so i have used this firmware a lot over the years ive been here since the start lurking.

Now my little rant i feel compelled to do.
i mailed BS about the 6-03 build that got pulled because it seems so many can bitch and moan on here but no one wants to place a ticket.

heres the email and the answer
Quote:

My Email to him:
wrt1900ac After flash and reset, if you click on the wireless tab gui will crash and you cant access it again until you reboot the router. Just wanted to shoot you a quick note since im on my way out the door for work.

His Reply:
hard to believe but i will check it

and then he pulled it and replaced it with another the next day, It was that simple. id have done a ticket but i was driving down the road...

As for everyone else.
When having a issue its good to gather all the details your able to and make a ticket on it.

Sometimes just this isnt working isnt enough info, do the detective work you can and let it be known on the ticket... IF your ticket gets closed with "need more info" ask the community for help on trying to gather it.

i personally read the time line each morning before work most days just to try to see whats going down.

i also try to see if we the community can solve it asking around in here on my issues before writing a ticket.
but even we the community need all the details we can get
thats why i have a signature with my basic configuration. and none default settings... anyway just my 2 cents. spend it how you all like.

_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &

WRT1900ACv1:

WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Yemble
DD-WRT Guru


Joined: 17 Feb 2010
Posts: 611
Location: Yorkshire (GOC)

PostPosted: Sat Jun 08, 2019 13:49    Post subject: Reply with quote
PIZZEDMEOFF wrote:

Now my little rant i feel compelled to do.
i mailed BS about the 6-03 build that got pulled because it seems so many can bitch and moan on here but no one wants to place a ticket.

heres the email and the answer
Quote:

My Email to him:
wrt1900ac After flash and reset, if you click on the wireless tab gui will crash and you cant access it again until you reboot the router. Just wanted to shoot you a quick note since im on my way out the door for work.

His Reply:
hard to believe but i will check it

and then he pulled it and replaced it with another the next day, It was that simple. id have done a ticket but i was driving down the road...


This is precisely why it is important for users to continue to post their experiences with particular builds here, especially if they have some issues. "Working with no issues on WRT... router" is also useful info. I have learnt through bitter experience not to trust every build that is released by BS and to only go with the ones where most user opinions are positive, both here and on the other DD-WRT forums.

These days, I like to be on the cutting edge, rather than the bleeding edge Laughing

BTW, if the build is in my sig., then you may assume that it installed correctly and works as expected for basic router operations Wink

_________________
Linksys WRT32X v1 - r45677
Linksys WRT1900AC v1 - r45677
TP-Link Archer C9 v1 - r45677
Firmware: ftp://ftp.dd-wrt.com/betas/2021/
ttowling
DD-WRT User


Joined: 01 Mar 2019
Posts: 130

PostPosted: Tue Jun 11, 2019 16:33    Post subject: Reply with quote
For some reason my Android phone has gone from maxing out my connection on 5.GHz, to only 5mb. Speed is ok on other devices..

This persists even when I restart the phone.

WRT1900ACS V2

<edit. Just able to reboot router and speed has returned to normal, but odd behaviour nonetheless>


Last edited by ttowling on Tue Jun 11, 2019 21:33; edited 1 time in total
grmcdorman
DD-WRT Novice


Joined: 15 Oct 2017
Posts: 41

PostPosted: Tue Jun 11, 2019 21:21    Post subject: Reply with quote
WRT1900AC V1. No problems observed, up now for 5 days. Mind you, haven't done speed tests or checked that all configuration pages are fully functional.
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 244
Location: FL

PostPosted: Wed Jun 12, 2019 2:39    Post subject: Reply with quote
new build out, i just made a post on it
_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &

WRT1900ACv1:

WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum