Joined: 08 May 2018 Posts: 14209 Location: Texas, USA
Posted: Fri May 17, 2019 13:53 Post subject: Re: Can't mount USB Hdd
BrainSlayer wrote:
padaboana wrote:
Hallo,
with this new build i can't mount my USB HDD.
I tried ext3 and ext4 format.
Linksys E4200
the 8 mb firmware was oversized for 8 mb routers and does not include ext4 anymore. only ntfs and fat will work. unfortunatly there is no right firmware for 16 mb flash routers so far
padaboana wrote:
Hallo Brainslayer,
could you please tell me how to find the latest build wich support ext3/ext4 file system to Mount HDD.
There isn't a public build available for that, which is what BS was saying....
Joined: 26 Mar 2013 Posts: 1856 Location: Hung Hom, Hong Kong
Posted: Fri May 17, 2019 14:17 Post subject:
Quick & dirty report: BS Build 39800 is working fine with my Asus RT-N18U (rev 1.0)
A bit busy with Win 10's new KB 4494441 in the meantime. Some weird things happened after the auto-magic patch....
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Router/Version: Linksys E4200
File: dd-wrt.v24-39800_NEWD-2_K2.6_big-nv60k.bin
Kernel: built-in
Mode: gateway
Status: HTTPS not working. Same in dd-wrt.v24-39800_NEWD-2_K2.6_mini-nv60k.bin
HTTPS works only in dd-wrt.v24-39800_NEWD-2_K2.6_mega-nv60k.bin
Router/Version: Trendnet tew-812dru v2 File: DD-WRT v3.0-r39800 mini (05/03/19) Kernel: Linux 4.4.179 #176 SMP Fri May 3 08:13:43 CEST 2019 armv7l Mode: Gateway Status: Not working
The router is soft bricked after upgrading. Had to revert back to r39715. I was able to restore through the emergency mini web server. It seems to be running into an issue during boot up. I am unable to troubleshoot further as I do not have my serial interface available to monitor the boot sequence to see what is failing.
I CLI flashed 39800 over the r39747 test build for my WNDR4500v2, and can no longer access it. SSIDs are gone now, though the lights on the device (set up in Client Mode) look normal. Will have to investigate later; just a word of warning for k3.10 devices. :-/
I have the same problem with Netgear R6300 v1 (also bcm4706 based) .
Can't connect to 5GHz on Asus RT-AC56U (Broadcom 4708). 2.4GHz works fine.
I spoke to BS regarding my WNDR4500v2 issue (wl1 interface gone, wl0 radio off, wl driver missing) including after resets and manual setup, but found that test build 39814 worked fine, and going back to 39800 broke it again, so I don't know... voodoo I guess. And Mardi Gras is long over. :-/ Running test build 39822 now, seems fine. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Router/Version: Asus RT-N66U
File: dd-wrt.v24-39800_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: Firmware: DD-WRT v3.0-r39800 big (05/15/19)
Kernel: Linux 3.10.108-d8 #24389 Wed May 15 17:47:59 CEST 2019 mips
Mode: Gateway, Wifi disabled
Reset: No
Status: Automatic reboot not working, ~36h up.
Router/Version: Asus RT-N12B
File: dd-wrt.v24-39800_NEWD-2_K3.x_mega_RT-N12B1.trx (D1 revision uses same HW as B1)
Firmware: DD-WRT v3.0-r39800 mega (05/15/19)
Kernel: Linux 3.10.108-d8 #24393 Wed May 15 17:52:38 CEST 2019 mips
Mode: Router, connected via WAN to N66U
Reset: No
Status: Working as intended, ~36h up.