Posted: Thu May 16, 2019 12:54 Post subject: ftp server on R7800
Hello All,
I have big troubles getting a ftp-server up and running with an MicroSD.
Currently I am using Build 39705M from Kong.
My Problem is I cant get access to the ftp. Neither from Internal nor External. Can anyone help me Setup. Ideally I also could have access to the share via samba...
1: Not saying it is the problen, but your ftp port number is quite high...I forget off hand what the upper limit is.
2: You dont have any "shares" set up? Under "File Sharing"
3: From your user list...It is hard not to think that you are trying to turn the router into a NVR/DVR...which will not work, as the throughput to the share won't be able to handel the constant load.
4: WAN access like this is never a good idea.
5: Probably also not the issue, but my setup has "Label" blank for all my mounted partitions under "Drive Manager". _________________ Location 1
R7800- DD-WRT v3.0-r53562 (10/03/23) Gateway
WNDR3400v1 DD-WRT v3.0-r35531_mega-nv64k (03/26/18 ) Access Point
WRT160Nv3 DD-WRT ?v3?.0-r35531 mini (03/26/18 ) Access Point
WRT54GSv5 DD-WRT v24-r33555_micro_generic (10/20/17) Repeater
Location 2
R7800- DD-WRT v3.0-r51855 (02/25/23) Gateway
R6300v2- DD-WRT v3.0-r50671 (10-26-22) Access Point
WNDR3700v2 DD-WRT v3.0-r35531 std (03/26/18 ) Access Point
E1200 v2 DD-WRT v3.0-r35531 mega-nv64k (03/26/18 ) Gateway(for trivial reasons)
RBWAPG-5HACT2HND-BE RouterOS-v6.46.4 (2/21/20) Outdoor Access Point
2x RBSXTG-5HPACD RouterOS-v6.46.4 (2/21/20) PTP Bridge 866.6Mbps-1GbpsLAN
Location 3
2x R7000- DD-WRT v3.0-r50671 (10/26/22) Access Points
2x RBWAPG-60AD RouterOS-v6.45.9 (04/30/20) PTP Bridge 2.3Gbps-1GbpsLAN
2x RBSXTsqG-5acD RouterOS-v6.49.7 (10/14/22) PTP Bridge 866.6Mbps-1GbpsLAN Thank You BrainSlayer for ALL that you do & have done, also to "most" everyone here that shares their knowledge