L2TPv3 Psuedowire

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Advanced Networking
Author Message
xtremegamer
DD-WRT Novice


Joined: 19 Oct 2012
Posts: 3

PostPosted: Fri May 03, 2019 8:31    Post subject: L2TPv3 Psuedowire Reply with quote
Hi all,

I would like to pass ethernet frames trough a tunnel and back, i think this is possible with a L2TPv3 Psuedowire.

Let me clearify with a drawing that i have included.

So i have a Set-top box that gets a different ip-adress from my isp in order to connect to their internal network(dmz)

It does that by checking its ethernet ports for a specific mac-adress and request dhcp from their internal server (10.x.x.x) & gets a LAN ip adress on the same interface from the modem's DHCP.

Now what i want to achieve is, make it so that the tunnel is transparent for the device & modem.

In short, the modem needs to see the mac-adress of the Set-top box.

What i want or i think i need todo is bridge the tunnel interface with port 2 of my remote router and also connect it to my modem.

If needed i can do the same on my router so it's really transparent or so it would not confuse the set-top box.

MY SIDE:
Router : Linksys WRT1900ACS running ddwrt

Remote SIDE:
Router : TP-link TL-WR1043ND running ddwrt

If their are any questions please let me know.

Thanks in advance,

Xtremegamer
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Advanced Networking All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum