[ozTravman]

I've been troubleshooting an issue with my Wi-FI on my NETGEAR R7000

I have it running dd-wrt, was Kong build until a couple of days ago when I changed to v3.0-r37305. Issue was present on both. I have it setup with a Wi-Fi network as WAN. The 5Ghz is currently in repeater mode connecting to the external wi-fi, 2.4Ghz is in AP mode. Also have another SSID on the 5Ghz to connect to it.


The issue is every minute I see a spike in ping traffic to the R7000, if I am doing real-time A/V I see packet loss and jitter and then it goes back to normal. On the monitoring of the router I see both 2.4 and 5g channels bottom out momentarily and then resume.

Cable connection to the router doesn't show signs of the packetloss/dropouts, only on the wifi client.

Any tips on log files or anything I can use to monitor what's going on.

4 bytes from 10.0.0.1: icmp_seq=11637 ttl=64 time=1.005 ms
64 bytes from 10.0.0.1: icmp_seq=11638 ttl=64 time=1.901 ms
64 bytes from 10.0.0.1: icmp_seq=11639 ttl=64 time=2.555 ms
64 bytes from 10.0.0.1: icmp_seq=11640 ttl=64 time=847.977 ms
64 bytes from 10.0.0.1: icmp_seq=11641 ttl=64 time=607.944 ms
64 bytes from 10.0.0.1: icmp_seq=11642 ttl=64 time=1496.313 ms
64 bytes from 10.0.0.1: icmp_seq=11643 ttl=64 time=494.694 ms
64 bytes from 10.0.0.1: icmp_seq=11644 ttl=64 time=10.714 ms
64 bytes from 10.0.0.1: icmp_seq=11645 ttl=64 time=19.724 ms
64 bytes from 10.0.0.1: icmp_seq=11646 ttl=64 time=0.993 ms
64 bytes from 10.0.0.1: icmp_seq=11647 ttl=64 time=2.316 ms
64 bytes from 10.0.0.1: icmp_seq=11648 ttl=64 time=0.818 ms
[/img]