Wifi monitoring to adjust directional antenna

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
DD-WRT Novice

Joined: 29 Apr 2019
Posts: 2

PostPosted: Wed May 01, 2019 10:35    Post subject: Wifi monitoring to adjust directional antenna Reply with quote
Good day,

I am trying to use my WRT54GL v1 to connect to a Hotspot in my proximity. To improve the signal strength I bought a directional antenna which I need to adjust now.
In the firmware 'DD-WRT v3.0-r38159 mini (01/02/19)' I am using, there are only limited possibilities to monitor signal strengths of nearby Hotspots. Under Status -> Wireless there are the options to use 'Site Survey' and 'Wiviz Survery' which both don't really fit my needs. What I would need is a tool that could continuously list the signal strength, so I can find the best rotation and position of my antenna. I struggle to find such a tool for DD-WRT on my router and the situation is made more difficult since the WRT54GL only has 4 MB of flash, 16 MB RAM and no USB port.
The 'wl' commands seemed like they could help but when using telnet on my Windows 10 laptop to connect to my router those commands either weren't recognized or didn't provide any output.

Do you know any way to continuously monitor the signal strength of nearby W-LAN? Any help is highly appreciated!
DD-WRT Novice

Joined: 29 Apr 2019
Posts: 2

PostPosted: Thu May 02, 2019 15:10    Post subject: Re: Wifi monitoring to adjust directional antenna Reply with quote
Thirst of all thank you very much d0ug and jxm for your quick responses!

d0ug wrote:

Your best bet is to get a USB wifi adapter that allows for external antenna hookup. An appropriate pigtail to connect the directional antenna to that USB adapter. Hook that antenna up to the wifi adatper then plug it into your PC/Laptop and use whatever wifi monitoring software you prefer to aim the antenna. Once its aimed tighten down all bolts on the antenna, disconnect it from the usb wifi adapter then hook it up to your router.

That is a good idea if I can't monitor nearby APs with my router. For now, I would like to keep trying and search for alternatives however.

jxm wrote:
In Site Survey, the column RSSI stands for Received Signal Strength Indicator. Connect your directional antenna to your router, then move it around and the RSSI value will change if the antenna is tuned to the correct wifi frequency. The highest value you find will be the direction of the strongest signal.


D0ug said it perfectly: The refresh rate is very low.

Thank you for the explanation of Wi-Fi connections d0ugh. It is very helpful. Some parts of it however I didn't quite understand.

d0ug wrote:
Also depending on the distances involved a directional antenna is not always going to fix the problem. A directional antenna at one end with just a normal wifi router sitting at the other end is like two people trying to have a conversation across a football field with only one of them having a megaphone. One side will be able to hear, but the other side won't. Ideally there should be directional antennas on both sides.

Doesn't a directional antenna improve both sending and receiving of a specific signal?

d0ugh wrote:
RSSI only shows how well your end can hear the remote end. It is NOT a link quality indicator. You should also be able to login to the remote wifi AP and see what it's RSSI is for how well it can hear you. Otherwise it is just a guessing game how well things are going to work. If with your directional antenna you have an SNR of 20 but the remote end with an omnidirectional antenna only has a SNR of 5, then your link quality is going to be quite poor.

Sadly I don't have access to the remote AP. I am trying to connect to one of Telekom's Hotspots. Telekom is my mobile phone carrier, and they allow access to the Hotspots they have in collaboration with Fon. This also means that I will be connecting to the AP through multiple walls and my antenna will be inside. I understand that this solution is far from perfect but I don't have many alternatives.

d0ugh wrote:

If you are going to go with just a directional antenna at one end, then you probably want as big of a parabolic antenna as you can use at your end. The larger surface area of the parabolic grid can capture and reflect more signal into the actual antenna that sticks out in the front. Like one of these https://www.altelix.com/2-4-GHz-24-dBi-Grid-Antenna-p/ag24g24.htm

Thank you for the link. This antenna looks interesting. Is this antenna preferable because of the higher dBi? I am not quite sure if it would be appropriate for indoor use.

I found a possible solution for my problem in the German DD-WRT wiki:
Here they use a script to monitor the Wlan quality continuously. They use Telnet to run the script, but as I said before I have troubles using Telnet. Do you think this script could help?

while [ 1 ];
do CH=`wl channel|grep target|cut -c16-`;
MAC=`wl assoclist|cut -d' ' -f2`;
RA=`wl rate|cut -d' ' -f3`;
RSSI=`wl rssi|cut -d' ' -f3`;
NOISE=`wl noise|cut -d' ' -f3`;
let SNR="$RSSI- $NOISE";
echo "MAC=$MAC Kanal $CH: Rate=$RA RSSI=$RSSI Noise=$NOISE SNR=$SNR";
sleep 1;
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT


Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum