I don't know whether the WRT3200ACM has any special needs (like the WRT32X, apparently) regarding reverting to stock, but it may be as simple as using the file linksys provides at that link in the GUI>Administration>Upgrade process.
Does anyone know? _________________ 2x Netgear XR500 and 3x Linksys WRT1900ACSv2 on 53544: VLANs, VAPs, NAS, station mode, OpenVPN client (AirVPN), wireguard server (AirVPN port forward) and clients (AzireVPN, AirVPN, private), 3 DNSCrypt providers via VPN.
I don't know whether the WRT3200ACM has any special needs (like the WRT32X, apparently) regarding reverting to stock, but it may be as simple as using the file linksys provides at that link in the GUI>Administration>Upgrade process.
Does anyone know?
I have had to revert my 3200's back a couple of times and you are right on with the procedure, nothing special just use the linksys firmware and update. _________________ Starlink & DSL -> TPLink TL-R470T+
->
WRT3200acm Master WDS 5GHz 80Mhz CH 100 (+6) r55460
Ath1 2.4Ghz Disabled
99 Static Leases
ExpressVPN
WRT3200acm r55460 WDS Station 5Ghz
Ath1 AP N/G Mixed Channel 11 HT40
WRT1900Ac V1 5Ghz r55460 WDS Station
(Defective, no 2.4Ghz but 5Ghz works great)
WRT1900AC V1 5Ghz AC 80Mhz WDS Station r55460
2.4Ghz AP Ch1 HT20 Mixed
WRT1900ACS SPARE r54914
WRT1900AC SPARE r54914
WRT1900AC V1 5Ghz AC 80Mhz WDS-AP r55460
2.4Ghz AP Ch1 HT20 Mixed
WRT54G DD-WRT v3.0-r37305 micro AP CH 6 Mixed - Not in use
Just apply the official firmware in the DD-WRT upgrade firmware section ?
It should work the same way, BS was able to code it in to be able to go back just by using the stock firmware.
If not, there is (or maybe was backup site with <Kong>'s revert to stock files, can't remember if he made one for the ACS though), I can't remember the sites URL but I know someone on here remembers. _________________ Tutorial for flashing WRT series WRT Installation,Upgrade & Basic Setup–Cliff Notes
r52242: WRT3200ACM, WRT1200ACv1 & 1 Velop in bridge mode(IoT subnet), r52242 WRT1900ACv1 AP
Velop:2 WHW0101, RE6500, RE9000(AP)
Spectrum - 1000/50
SysLog Watcher 5, New security Onion box coming soon, Fingboxes, PiHoles, NEMS, Cacti, rpisurv
Just apply the official firmware in the DD-WRT upgrade firmware section ?
It should work the same way, BS was able to code it in to be able to go back just by using the stock firmware.
If not, there is (or maybe was backup site with <Kong>'s revert to stock files, can't remember if he made one for the ACS though), I can't remember the sites URL but I know someone on here remembers.
Apologies for the bump - but is this confirmed as working? I need to revert my WRT1900ACS V2 and want to know if all I need is the latest Linksys stock firmware for that? (as below)
Well, you do have two partitions. I say go for it. You have a USB to TTL serial cable such as Adafruit 954? Factory firmware can be flashed via u-boot environment and TFTP with that cable.
Well, you do have two partitions. I say go for it. You have a USB to TTL serial cable such as Adafruit 954? Factory firmware can be flashed via u-boot environment and TFTP with that cable.
I don't have a serial cable.. I thought I had read that DD supported easy flashing of stock but maybe I imagined it.