new KONG DD-WRT test build v3.0-r39345M (3 April 2019)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3  Next
Author Message
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 4693
Location: Netherlands

PostPosted: Wed Apr 03, 2019 8:21    Post subject: new KONG DD-WRT test build v3.0-r39345M (3 April 2019) Reply with quote
Kong's DD-WRT test build DD-WRT v3.0-r39345M kongac (04/03/19) has been released: http://desipro.de/ddwrt/K3-AC-Arm/TEST/

Kong uploaded a new build with same date and version number, NAS page buttons are working now

Changes see: https://svn.dd-wrt.com//


Problems and workarounds:
1) When VAP is not working at boot; workaround startup command:
sleep 10; stopservice nas; stopservice wlconf; startservice wlconf; startservice nas;
2) Aternative way to get VAP working: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=317181
3) An other user reports the following workaround (save as startup):
sleep 4; stopservice cron; stopservice wlconf; wlconf eth1 up; wlconf eth2 up; startservice cron;
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=319412
4)This one is from @Redhawk (guaranteed to work Wink ):
sleep 20; stopservice nas; wlconf eth1 down; wlconf eth2 down; wlconf eth1 up; wlconf eth2 up; startservice nas


Your reports for Broadcom units are greatly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:


This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29440_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

_________________
Routers:Netgear R7800, Netgear R6400v1, Netgear R6400v2, Linksys EA6900 (XvortexCFE), Linksys E2000 (converted WRT320N), WRT54GS v1.
Install guide Linksys EA6900: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=291230
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135


Last edited by egc on Sat Apr 13, 2019 12:26; edited 3 times in total
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 4693
Location: Netherlands

PostPosted: Wed Apr 03, 2019 10:33    Post subject: Reply with quote
Router Model: Netgear R6400v2, board_id: U12H332T30_NETGEAR

Firmware Version: DD-WRT v3.0-r39345M kongac (04/03/19)
Kernel Version: Linux 4.4.177 #647 SMP Wed Apr 3 00:31:14 CEST 2019 armv7l

Upgraded: from DD-WRT v3.0-r38580M kongac (02/05/19) via ddup --flash-latest
Reset: No not this time

Status: Up and running for 2 hours, basic setup as Gateway, static leases, OpenVPN client (on PIA) with Policy Based Routing up and running, 2,4GHz, 5Ghz USB storage NAS and miniDLNA working, OpenVPN server working.


Errors: Yes
1. OpenVPN with Policy Based Routing does not forward HTTP(s) traffic to the PBR clients with SFE on see: http://svn.dd-wrt.com/ticket/5900
2. DNS leak see: http://svn.dd-wrt.com/ticket/6020
3. OpenVPN client Firewall is not working when enabled in GUI: https://svn.dd-wrt.com/ticket/6332#comment:6
4. I quickly tested an unbridged VAP without workarounds and it appears to work. Is it realy fixed?

There is a solution, to the PBR not working with SFE, @Quarkysg has made a patch for the shortcut-fe module (see: http://svn.dd-wrt.com/ticket/5986#comment:17 ).
He also compiled a shortcut-fe.ko module for testing (Arm/Broadcom , Linux 4.4) see: https://www.dd-wrt.com/phpBB2/viewtopic.php?p=1107870#1107870 , I am running that patched shortcut-fe.ko module right now and it is working with PBR.

Big Thanks to Kong and BrainSlayer and other devs!!

Kong really glad we have a new build from you!

_________________
Routers:Netgear R7800, Netgear R6400v1, Netgear R6400v2, Linksys EA6900 (XvortexCFE), Linksys E2000 (converted WRT320N), WRT54GS v1.
Install guide Linksys EA6900: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=291230
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135


Last edited by egc on Wed Apr 03, 2019 12:38; edited 1 time in total
nolimitz
DD-WRT Guru


Joined: 26 Nov 2010
Posts: 503

PostPosted: Wed Apr 03, 2019 12:07    Post subject: Reply with quote
Router Model: Netgear R7000P
Firmware Version: DD-WRT v3.0-r39345M kongac (04/03/19)
Reset: yes, telnet (erase nvram && reboot)
errors: NAS page does not respond to save or apply
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1316
Location: Indiana

PostPosted: Wed Apr 03, 2019 14:14    Post subject: Reply with quote
R6200v2
DD-WRT v3.0-r39345M kongac (04/03/19)
Linux 4.4.177 #647

Tried new upgrade method
Engage recovery mode
Set static IP
tftp-->39345-4-3-19dd-wrt.K3_R6250.chk
Previous 38580
No reset
Working as WLAN REP
Errors: Confirm NAS page broken
Something new:
Code:
Apr 3 10:00:06 6200 daemon.warn dnsmasq[1230]: possible DNS-rebind attack detected: www.google-analytics.com
Apr 3 10:01:16 6200 daemon.warn dnsmasq[1230]: possible DNS-rebind attack detected: tags-cdn.deployads.com

_________________
SUPPORTED DEVICES -- DON'T USE ROUTER DATABASE!
--IMPORTANT UPGRADE INFORMATION--STUBBY DoT install guide
Qualcomm-Atheros:
R7800 x2 BS std GW AP & GW WDS AP -- R7500V2 BS std WDS STA-- WZR-HP-AG300H BS std WDS STA
WNDR3700v4 BS std WDS STA-- Nanostation M2 AirOS-- LocoM2 AirOS
MikroTik SXT R LTE RouterOS
Broadcom:
R6200v2 41813std TFTP R6250.chk WLAN Repeater Archer C9 v1 OEM WAP

DDWRT Policy Based Routing Guide-1.03 by egc
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 4693
Location: Netherlands

PostPosted: Wed Apr 03, 2019 14:33    Post subject: Reply with quote
Can confirm, the buttons on the NAS page are NOT working Sad

Kong uploaded a new build with same date and version number, NAS page buttons are working now!.

_________________
Routers:Netgear R7800, Netgear R6400v1, Netgear R6400v2, Linksys EA6900 (XvortexCFE), Linksys E2000 (converted WRT320N), WRT54GS v1.
Install guide Linksys EA6900: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=291230
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135


Last edited by egc on Thu Apr 04, 2019 5:52; edited 1 time in total
dTX
DD-WRT User


Joined: 28 Dec 2018
Posts: 64

PostPosted: Wed Apr 03, 2019 16:01    Post subject: Reply with quote
bushant wrote:
Quote:
Something new:
Code:
Apr 3 10:00:06 6200 daemon.warn dnsmasq[1230]: possible DNS-rebind attack detected: www.google-analytics.com
Apr 3 10:01:16 6200 daemon.warn dnsmasq[1230]: possible DNS-rebind attack detected: tags-cdn.deployads.com


Hey,that's a good thing,it means that dnsmasq does it's job protecting you from those data mining bastards Laughing

egc wrote:
Quote:
Can confirm, the buttons on the NAS page are NOT working Sad


I guess i better wait for a patch version before flushing it(not that i'm using NAS though),i just remember the last build before this one had some problems and <Kong> patched it,and i had to reflash after.

_________________
Router: ASUS AC1900(RT-AC68U)
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1316
Location: Indiana

PostPosted: Wed Apr 03, 2019 16:34    Post subject: Reply with quote
dTX wrote:
bushant wrote:
Quote:
Something new:
Code:
Apr 3 10:00:06 6200 daemon.warn dnsmasq[1230]: possible DNS-rebind attack detected: www.google-analytics.com
Apr 3 10:01:16 6200 daemon.warn dnsmasq[1230]: possible DNS-rebind attack detected: tags-cdn.deployads.com

Hey,that's a good thing,it means that dnsmasq does it's job protecting you from those data mining bastards Laughing


Syslog was filling several pages of those.
I disabled my adblock file on the main router and seems to have ended it.
I only enabled the adblock file a couple days ago and this router has been powered off for several days so I do not know when it really started.

I also have miner block running on Chromium sooooo...

_________________
SUPPORTED DEVICES -- DON'T USE ROUTER DATABASE!
--IMPORTANT UPGRADE INFORMATION--STUBBY DoT install guide
Qualcomm-Atheros:
R7800 x2 BS std GW AP & GW WDS AP -- R7500V2 BS std WDS STA-- WZR-HP-AG300H BS std WDS STA
WNDR3700v4 BS std WDS STA-- Nanostation M2 AirOS-- LocoM2 AirOS
MikroTik SXT R LTE RouterOS
Broadcom:
R6200v2 41813std TFTP R6250.chk WLAN Repeater Archer C9 v1 OEM WAP

DDWRT Policy Based Routing Guide-1.03 by egc
dTX
DD-WRT User


Joined: 28 Dec 2018
Posts: 64

PostPosted: Wed Apr 03, 2019 18:29    Post subject: Reply with quote
bushant wrote:
Quote:
Syslog was filling several pages of those.
I disabled my adblock file on the main router and seems to have ended it


That is exactly the opposite of what your adblock file suppose to do.If that domain was blocked there you wouldn't see all those dnsmasq's entries in the log.But i'm not gonna argue(due to bad experience in past from some individuals) so i'd say whatever works.

_________________
Router: ASUS AC1900(RT-AC68U)
701b84b9ff
DD-WRT Novice


Joined: 03 Apr 2019
Posts: 4

PostPosted: Wed Apr 03, 2019 20:09    Post subject: Reply with quote
egc wrote:
Can confirm, the buttons on the NAS page are NOT working Sad

Same here... Crying or Very sad
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1316
Location: Indiana

PostPosted: Wed Apr 03, 2019 21:27    Post subject: Reply with quote
Am I wrong or does the file in the test folder have a newer time stamp?
I downloaded it and it has a different md5 from the one I loaded this morning.

_________________
SUPPORTED DEVICES -- DON'T USE ROUTER DATABASE!
--IMPORTANT UPGRADE INFORMATION--STUBBY DoT install guide
Qualcomm-Atheros:
R7800 x2 BS std GW AP & GW WDS AP -- R7500V2 BS std WDS STA-- WZR-HP-AG300H BS std WDS STA
WNDR3700v4 BS std WDS STA-- Nanostation M2 AirOS-- LocoM2 AirOS
MikroTik SXT R LTE RouterOS
Broadcom:
R6200v2 41813std TFTP R6250.chk WLAN Repeater Archer C9 v1 OEM WAP

DDWRT Policy Based Routing Guide-1.03 by egc
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4354
Location: Germany

PostPosted: Wed Apr 03, 2019 21:50    Post subject: Reply with quote
bushant wrote:
Am I wrong or does the file in the test folder have a newer time stamp?
I downloaded it and it has a different md5 from the one I loaded this morning.


Yes updated build, including webif fix, by including raid feature, if not included there are javascript errors.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1316
Location: Indiana

PostPosted: Wed Apr 03, 2019 22:22    Post subject: Reply with quote
R6200
Netgear R6250
DD-WRT v3.0-r39345M kongac (04/03/19)
Linux 4.4.177 #650
Tried to update with dd-wrt.K3_R6250.chk using webif,
Did not work.
TFTP-->dd-wrt.K3_R6250.chk
Nas page working Very Happy
All seems well
Thank you <Kong>

_________________
SUPPORTED DEVICES -- DON'T USE ROUTER DATABASE!
--IMPORTANT UPGRADE INFORMATION--STUBBY DoT install guide
Qualcomm-Atheros:
R7800 x2 BS std GW AP & GW WDS AP -- R7500V2 BS std WDS STA-- WZR-HP-AG300H BS std WDS STA
WNDR3700v4 BS std WDS STA-- Nanostation M2 AirOS-- LocoM2 AirOS
MikroTik SXT R LTE RouterOS
Broadcom:
R6200v2 41813std TFTP R6250.chk WLAN Repeater Archer C9 v1 OEM WAP

DDWRT Policy Based Routing Guide-1.03 by egc
dTX
DD-WRT User


Joined: 28 Dec 2018
Posts: 64

PostPosted: Thu Apr 04, 2019 5:02    Post subject: Reply with quote
Router: ASUS AC1900(AC68U)
Firmware:DD-WRT v3.0-r39345M kongac (04/03/19)
Kernel:Linux 4.4.177 #650 SMP Wed Apr 3 20:04:03 CEST 2019 armv7l
Mode:Gateway/AP (very basic setup)
Status:Working OK,nothing major to report
Reset:Yes.Hard reset before and after ddup --flash-latest
Temperatures: CPU 37.5 °C / WL1 40.3 °C
Improvements:Look at that.We got e2fsck and full tune2fs.What a JOY that is Laughing

Errors(that are new):
Dec 31 18:00:12 DD-WRT kern.err kernel: smp_twd: clock not found -2
Dec 31 18:00:12 DD-WRT kern.info kernel: L2C-310 erratum 769419 enabled
Dec 31 18:00:12 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 18:00:12 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)

Warnings(that are new):
Dec 31 18:00:12 DD-WRT kern.warn kernel: Ignoring unrecognised tag 0x00000000
Dec 31 18:00:12 DD-WRT kern.warn kernel: Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
Dec 31 18:00:12 DD-WRT kern.warn kernel: L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x7a53000
Dec 31 18:00:12 DD-WRT kern.warn kernel: lookup_nflash_rootfs_offset: offset = 0x200000 size = 0x1e00000, 0x20000
Dec 31 18:00:12 DD-WRT kern.warn kernel: nf_conntrack_rtsp v0.7 loading
Dec 31 18:00:12 DD-WRT kern.warn kernel: nf_nat_rtsp v0.7 loading
Dec 31 18:00:12 DD-WRT kern.warn kernel: Spare area=64 eccbytes 56, ecc bytes located at:
Dec 31 18:00:12 DD-WRT kern.warn kernel: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Dec 31 18:00:12 DD-WRT kern.warn kernel: Available 7 bytes at (off,len):
Dec 31 18:00:12 DD-WRT kern.warn kernel: (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
Dec 31 18:00:12 DD-WRT kern.warn kernel: Options: NO_SUBPAGE_WRITE,
Dec 31 18:00:12 DD-WRT kern.warn kernel: et: module license 'Proprietary' taints kernel.
Dec 31 18:00:12 DD-WRT kern.warn kernel: Disabling lock debugging due to kernel taint
Dec 31 18:00:12 DD-WRT kern.warn kernel: et_module_init: passivemode set to 0x0
Dec 31 18:00:12 DD-WRT kern.warn kernel: et_module_init: txworkq set to 0x0
Dec 31 18:00:12 DD-WRT kern.warn kernel: et_module_init: et_txq_thresh set to 0x400
Dec 31 18:00:12 DD-WRT kern.warn kernel: et_module_init: et_rxlazy_timeout set to 0x3e8
Dec 31 18:00:12 DD-WRT kern.warn kernel: et_module_init: et_rxlazy_framecnt set to 0x20
Dec 31 18:00:12 DD-WRT kern.warn kernel: et_module_init: et_rxlazy_dyn_thresh set to 0
Dec 31 18:00:12 DD-WRT kern.warn kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.89.21 (r524987)
Dec 31 18:00:12 DD-WRT kern.warn kernel: wl_module_init: passivemode set to 0x0
Dec 31 18:00:12 DD-WRT kern.warn kernel: wl_module_init: txworkq set to 0x0
Dec 31 18:00:12 DD-WRT kern.warn kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller 7.14.89.21 (r524987)
Dec 31 18:00:12 DD-WRT kern.warn kernel: eth2: Broadcom BCM4360 802.11 Wireless Controller 7.14.89.21 (r524987)
Dec 31 18:00:12 DD-WRT kern.warn kernel: eth0: mixed HW and IP checksum settings.
Apr 3 22:21:53 DD-WRT kern.warn kernel: nr_pdflush_threads exported in /proc is scheduled for removal

Thank you <Kong>.Glad you're back.Keep up the good work Very Happy

_________________
Router: ASUS AC1900(RT-AC68U)
eywong
DD-WRT User


Joined: 21 Jul 2010
Posts: 120
Location: USA

PostPosted: Thu Apr 04, 2019 16:12    Post subject: Asus RT-AC68U A1 Reply with quote
Router: Asus RT-AC68U (H/W Ver: A1)
Firmware: DD-WRT v3.0-r39345M kongac (04/03/19)
Previous: DD-WRT v3.0-r38580M kongac (02/05/19)
Kernel: Linux 4.4.177 #650 SMP Wed Apr 3 20:04:03 CEST 2019 armv7l
Previous: Linux 4.4.173-rc1 #633 SMP Tue Feb 5 22:28:16 CET 2019 armv7l
Status: ok
Reset: no (ddup --flash-latest)
Errors: no
Uptime: 16:51

wl0: AP / NG-Mixed / Ch Auto
Channel Width: Wide HT40 (40 MHz)
Extension Channel: lower
wl1: AP / AC/N-Mixed / Ch Auto
Channel Width: Wide VHT80 (80 MHz)
Extension Channel: lower lower
DHCP Server: Enabled - Running
Static Leases: 4 hardwired NAS, 1 wireless printer
NTP Client: Enable
Server IP/Name: us.pool.ntp.org
IPv6: Disable
dTX
DD-WRT User


Joined: 28 Dec 2018
Posts: 64

PostPosted: Thu Apr 04, 2019 16:14    Post subject: Reply with quote
There is a missing option in 5Ghz Wireless: Optimize Multicast Traffic
When enabled the speed tests were showing better results and everything seemed faster.
Not sure why they got rid of it.
There is now new option there:Multicast to Unicast
Can anyone enlighten me do i even need this enabled.Are there any benefits? Thanks.

_________________
Router: ASUS AC1900(RT-AC68U)
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum