I Restore to 37495M everything will be ok, but if i set Wireless Channel Width to VHT80 (80Mhz) or VHT160 (80+80 Mhz), my Intel 9260AC can't connect or can't find Wireless SSID, only use VHT160 .
Channel is Unknown when i use new 39345m Build. 37495 still ok with VHT160.
there are many major changes from 37495 to 39345. screenshot settings, reset to default/nvram erase and setup from scratch.
intel 9260 doesn't do 80+80 only 80 or 160. use 80, chan 149-UU or 161-LL
I have been using kongat build 39000M since March 14, with 21 days uptime on both R7800s. Any improvements with this build? TIA! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
EA8500 ... r39345M up 3 days, 18:28
It's been a solid build for me so far....I think a slight improvement to r39000M
---
EDIT:
ath0 (2.4 GHz)
RX 3389228 OK, no error
TX 6682581 OK, no error
I Restore to 37495M everything will be ok, but if i set Wireless Channel Width to VHT80 (80Mhz) or VHT160 (80+80 Mhz), my Intel 9260AC can't connect or can't find Wireless SSID, only use VHT160 .
Channel is Unknown when i use new 39345m Build. 37495 still ok with VHT160.
there are many major changes from 37495 to 39345. screenshot settings, reset to default/nvram erase and setup from scratch.
intel 9260 doesn't do 80+80 only 80 or 160. use 80, chan 149-UU or 161-LL
Still error 5Ghz after upgrade this build and earse NVRAM, i restore to 37495m for now, wait for stable release.
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Mon Apr 08, 2019 22:13 Post subject:
is there a way to force a process to always run on a certain core? such as dnsmasq on core 0 always instead of randomly switching cores? _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
I Restore to 37495M everything will be ok, but if i set Wireless Channel Width to VHT80 (80Mhz) or VHT160 (80+80 Mhz), my Intel 9260AC can't connect or can't find Wireless SSID, only use VHT160 .
Channel is Unknown when i use new 39345m Build. 37495 still ok with VHT160.
there are many major changes from 37495 to 39345. screenshot settings, reset to default/nvram erase and setup from scratch.
intel 9260 doesn't do 80+80 only 80 or 160. use 80, chan 149-UU or 161-LL
I found my problem, if i disable 2.4Ghz Wireless, 5Ghz Channel will be unknown, hope Kong will fix this, i only use 5Ghz.
I Restore to 37495M everything will be ok, but if i set Wireless Channel Width to VHT80 (80Mhz) or VHT160 (80+80 Mhz), my Intel 9260AC can't connect or can't find Wireless SSID, only use VHT160 .
Channel is Unknown when i use new 39345m Build. 37495 still ok with VHT160.
there are many major changes from 37495 to 39345. screenshot settings, reset to default/nvram erase and setup from scratch.
intel 9260 doesn't do 80+80 only 80 or 160. use 80, chan 149-UU or 161-LL
I found my problem, if i disable 2.4Ghz Wireless, 5Ghz Channel will be unknown, hope Kong will fix this, i only use 5Ghz.
Probably nothing for Kong to fix. Have you done what Jerry suggested? Reset to default and re-set up again from the GUI. Using settings baked in or restored from older versions is likely to cause these kind of issues if there have been lots of changes.
what are the odds we have this? its recently posted (even hostapd conf on main site doesnt list it yet)
From your link: The kernel part has been merged into mac80211 for the 5.1 dev cycle.
I don't know of any router firmwares running on kernel 5.x, and certainly not Kong's DD-WRT or OpenWRT builds _________________ --Netgear R7800--
DD-WRT v3.0-r49492 std (07/14/22)
I Restore to 37495M everything will be ok, but if i set Wireless Channel Width to VHT80 (80Mhz) or VHT160 (80+80 Mhz), my Intel 9260AC can't connect or can't find Wireless SSID, only use VHT160 .
Channel is Unknown when i use new 39345m Build. 37495 still ok with VHT160.
there are many major changes from 37495 to 39345. screenshot settings, reset to default/nvram erase and setup from scratch.
intel 9260 doesn't do 80+80 only 80 or 160. use 80, chan 149-UU or 161-LL
I found my problem, if i disable 2.4Ghz Wireless, 5Ghz Channel will be unknown, hope Kong will fix this, i only use 5Ghz.
Probably nothing for Kong to fix. Have you done what Jerry suggested? Reset to default and re-set up again from the GUI. Using settings baked in or restored from older versions is likely to cause these kind of issues if there have been lots of changes.
I try to reset, earse NVRAM to Default but problem still there, now i Enable ath0 and ath1 together and when i done my setup, i disable ath1 for only use 5Ghz.
I wonder if esata support was added for R7500v2 in this build. Can anyone confirm?
Remember, last time Kong wrote in "...r39000M" thread:
"Just forgot to add the change to the 4.9 dts for ea8500/7500 since I always use the R7800 for tests this slipped through"
.
