Do not use! KONG DD-WRT test build v3.0-r38570M (02/04/19)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6154
Location: Netherlands

PostPosted: Tue Feb 05, 2019 12:54    Post subject: Do not use! KONG DD-WRT test build v3.0-r38570M (02/04/19) Reply with quote
Kong's DD-WRT test build DD-WRT v3.0-r38570M kongac (02/04/19) has been released: http://desipro.de/ddwrt/K3-AC-Arm/TEST/

This build gives frequent GUI crashes, better wait with using this build. Fix is underway

Changes see: https://svn.dd-wrt.com//


Problems and workarounds:
1) When VAP is not working at boot; workaround startup command:
sleep 10; stopservice nas; stopservice wlconf; startservice wlconf; startservice nas;
2) Aternative way to get VAP working: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=317181

Your reports for Broadcom units are greatly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:


This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29440_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087


Last edited by egc on Wed Feb 06, 2019 8:43; edited 3 times in total
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6154
Location: Netherlands

PostPosted: Tue Feb 05, 2019 14:47    Post subject: Reply with quote
Router Model: Netgear R6400v1

Firmware Version: DD-WRT v3.0-r38570M kongac (02/04/19)
Kernel Version: Linux 4.4.172 #631 SMP Mon Feb 4 18:11:24 CET 2019 armv7l

Upgraded: from DD-WRT v3.0-r38100M kongac (12/27/2018) via ddup --flash-latest
Reset: No not this time

Status: Up and running 2 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, DynDNS, 2.4 GHz and 5 GHz

Errors: No

Big Thanks to Kong and BrainSlayer!!

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6154
Location: Netherlands

PostPosted: Tue Feb 05, 2019 15:58    Post subject: Reply with quote
GUI was not responding, had to telnet into my router and do:
stopservice httpd
startservice httpd

On the bright site, when the GUI responds it is lightning fast

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6154
Location: Netherlands

PostPosted: Tue Feb 05, 2019 17:22    Post subject: Reply with quote
Again GUI crash with very high CPU usage.
I have no time to do nvram erase at the moment so reverting back to 37015 Sad

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1393

PostPosted: Tue Feb 05, 2019 17:36    Post subject: Reply with quote
Router Name R6200V2
Router Model Netgear R6250 (No it isn't)
Firmware Version DD-WRT v3.0-r38570M kongac (02/04/19)
Kernel Version Linux 4.4.172 #631

ddup --flash-remote http://www.desipro.de/ddwrt/K3-AC-Arm/TEST/dd-wrt.v24-K3_AC_ARM_STD.bin
This puts router in recovery mode

TFTP dd-wrt-K3_R6200V2_7-Aug-2014.chk
Webif update to 38570 dd-wrt.v24-K3_AC_ARM_STD.bin

Previous 37985
Uptime ~2 1/2 hour
Working fine so far as RB
Have not been able to crash GUI yet
Thanks <Kong>

Note to self: Try ddwrt/K3-AC-Arm/TEST/dd-wrt.K3_R6250.chk first next time Razz

_________________
STUBBY DoT install guide----Tips-DD-WRT

Forum Guide Lines (Please read!)----How to get help the right way
dTX
DD-WRT User


Joined: 28 Dec 2018
Posts: 64

PostPosted: Tue Feb 05, 2019 18:08    Post subject: Reply with quote
Router: ASUS AC 1900(RT-AC68U)
Firmware: DD-WRT v3.0-r38570M kongac (02/04/19)
Kernel: Linux 4.4.172 #631 SMP Mon Feb 4 18:11:24 CET 2019 armv7l
Status: Working
Setup: Very Basic(Gateway/AP)
Reset: YES: Hard reset(power on+hold WPS button for about 30 sec.) before and after ddup --flash-latest
Temperatures: CPU 43.6 °C / WL1 41.9 °C
Problems: YES: e2fsck not present/missing(c'mon <Kong>),No drivers found for the USB 3,still not possible to PING any internal IP's from the router,Maximum Ports was set to 32768(that's insane)...to be continue(still discovering)
Errors/Warnings: YES:

Errors:

Dec 31 18:00:12 DD-WRT kern.err kernel: smp_twd: clock not found -2
Dec 31 18:00:12 DD-WRT kern.info kernel: L2C-310 erratum 769419 enabled
Dec 31 18:00:12 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 18:00:12 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Dec 31 18:00:12 DD-WRT kern.err kernel: sd 0:0:0:0: [sda] No Caching mode page found
Dec 31 18:00:12 DD-WRT kern.err kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through

Warnings:

Dec 31 18:00:12 DD-WRT kern.warn kernel: Ignoring unrecognised tag 0x00000000
Dec 31 18:00:12 DD-WRT kern.warn kernel: Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
Dec 31 18:00:12 DD-WRT kern.warn kernel: L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x7a530000
Dec 31 18:00:12 DD-WRT kern.warn kernel: Found a AMD NAND flash:
Dec 31 18:00:12 DD-WRT kern.warn kernel: Total size: 128MB
Dec 31 18:00:12 DD-WRT kern.warn kernel: Block size: 128KB
Dec 31 18:00:12 DD-WRT kern.warn kernel: Page Size: 2048B
Dec 31 18:00:12 DD-WRT kern.warn kernel: OOB Size: 64B
Dec 31 18:00:12 DD-WRT kern.warn kernel: Sector size: 512B
Dec 31 18:00:12 DD-WRT kern.warn kernel: Spare size: 16B
Dec 31 18:00:12 DD-WRT kern.warn kernel: ECC level: 8 (8-bit)
Dec 31 18:00:12 DD-WRT kern.warn kernel: Device ID: 0x 1 0xf1 0x80 0x1d 0x 1 0xf1
Dec 31 18:00:12 DD-WRT kern.warn kernel: PCI: no core
Dec 31 18:00:12 DD-WRT kern.warn kernel: PCI: no core
Dec 31 18:00:12 DD-WRT kern.warn kernel: PCI: Fixing up bus 0 domain 0
Dec 31 18:00:12 DD-WRT kern.warn kernel: PCI: Fixing up bus 0 domain 1
Dec 31 18:00:12 DD-WRT kern.warn kernel: PCI: Fixing up bus 1 domain 1
Dec 31 18:00:12 DD-WRT kern.warn kernel: PCI: Fixing up bus 0 domain 2
Dec 31 18:00:12 DD-WRT kern.warn kernel: PCI: Fixing up bus 1 domain 2
Dec 31 18:00:12 DD-WRT kern.warn kernel: Boot partition size = 524288(0x80000)
Dec 31 18:00:12 DD-WRT kern.warn kernel: lookup_nflash_rootfs_offset: offset = 0x200000 size = 0x1e00000, 0x20000
Dec 31 18:00:12 DD-WRT kern.warn kernel: nf_conntrack_rtsp v0.7 loading
Dec 31 18:00:12 DD-WRT kern.warn kernel: nf_nat_rtsp v0.7 loading
Dec 31 18:00:12 DD-WRT kern.warn kernel: Spare area=64 eccbytes 56, ecc bytes located at:
Dec 31 18:00:12 DD-WRT kern.warn kernel: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Dec 31 18:00:12 DD-WRT kern.warn kernel: Available 7 bytes at (off,len):
Dec 31 18:00:12 DD-WRT kern.warn kernel: (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
Dec 31 18:00:12 DD-WRT kern.warn kernel: Options: NO_SUBPAGE_WRITE,
Dec 31 18:00:12 DD-WRT kern.warn kernel: et: module license 'Proprietary' taints kernel.
Dec 31 18:00:12 DD-WRT kern.warn kernel: Disabling lock debugging due to kernel taint
Dec 31 18:00:12 DD-WRT kern.warn kernel: et_module_init: passivemode set to 0x0
Dec 31 18:00:12 DD-WRT kern.warn kernel: et_module_init: txworkq set to 0x0
Dec 31 18:00:12 DD-WRT kern.warn kernel: et_module_init: et_txq_thresh set to 0x400
Dec 31 18:00:12 DD-WRT kern.warn kernel: et_module_init: et_rxlazy_framecnt set to 0x20
Dec 31 18:00:12 DD-WRT kern.warn kernel: et_module_init: et_rxlazy_dyn_thresh set to 0
Dec 31 18:00:12 DD-WRT kern.warn kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.89.21 (r524987)
Dec 31 18:00:12 DD-WRT kern.warn kernel: wl_module_init: passivemode set to 0x0
Dec 31 18:00:12 DD-WRT kern.warn kernel: wl_module_init: txworkq set to 0x0
Dec 31 18:00:12 DD-WRT kern.warn kernel: eth1: Broadcom BCM4360 802.11 Wireless Controller 7.14.89.21 (r524987)
Dec 31 18:00:12 DD-WRT kern.warn kernel: eth2: Broadcom BCM4360 802.11 Wireless Controller 7.14.89.21 (r524987)
Dec 31 18:00:12 DD-WRT kern.warn kernel: eth0: mixed HW and IP checksum settings.
Dec 31 18:00:12 DD-WRT kern.warn kernel: EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
Dec 31 18:00:12 DD-WRT kern.warn kernel: et_module_init: et_rxlazy_timeout set to 0x3e8
****************************************************************************************
Feb 4 18:54:17 DD-WRT kern.info kernel: nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.

Conclusion: Well...judging by other post from ASUS owners in BS builds with similar problems it looks like the support for ASUS Routers it's at the bare minimum.Very disapointed Crying or Very sad

_________________
Router: ASUS AC1900(RT-AC68U)
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1393

PostPosted: Tue Feb 05, 2019 19:31    Post subject: Reply with quote
It took around 5 1/2 hours but I finally crashed GUi Rolling Eyes

To dang hard to revert, going to live with it.

_________________
STUBBY DoT install guide----Tips-DD-WRT

Forum Guide Lines (Please read!)----How to get help the right way
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4339
Location: Germany

PostPosted: Tue Feb 05, 2019 19:32    Post subject: Reply with quote
egc wrote:
GUI was not responding, had to telnet into my router and do:
stopservice httpd
startservice httpd

On the bright site, when the GUI responds it is lightning fast


Then most likely same issue as the one seen with the previous IPQ builds, where a little patch seems to have fixed it.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
stalonge
DD-WRT Guru


Joined: 21 Jul 2006
Posts: 1865
Location: Fortaleza Ce Brazil

PostPosted: Tue Feb 05, 2019 20:09    Post subject: Reply with quote
egc wrote:
Again GUI crash with very high CPU usage.
I have no time to do nvram erase at the moment so reverting back to 37015 Sad


@Kong

Same here

Very Happy Very Happy

_________________
DDwrt ...it rocks ....
1 R8500 41556 AP OpenVPN webserver RETIRED (bricked)
1 R7800 42912 AP Wireguard webserver JFFS SAMBA FTP usb HD Mesh
1 R7800 42912 Cli Mesh
1 WZR1750 42908 AP Webserver OpenVPN
1 DDx86 Vmware 40260
1 E3000 41027 K3 @500 WAP wifi client
stalonge
DD-WRT Guru


Joined: 21 Jul 2006
Posts: 1865
Location: Fortaleza Ce Brazil

PostPosted: Tue Feb 05, 2019 23:59    Post subject: Reply with quote
Thanks Kong

38580 fix webgui issue

Very Happy Very Happy

_________________
DDwrt ...it rocks ....
1 R8500 41556 AP OpenVPN webserver RETIRED (bricked)
1 R7800 42912 AP Wireguard webserver JFFS SAMBA FTP usb HD Mesh
1 R7800 42912 Cli Mesh
1 WZR1750 42908 AP Webserver OpenVPN
1 DDx86 Vmware 40260
1 E3000 41027 K3 @500 WAP wifi client
ludovic
DD-WRT Novice


Joined: 27 Oct 2017
Posts: 16
Location: Europe

PostPosted: Thu Mar 21, 2019 20:14    Post subject: Reply with quote
stalonge wrote:
Thanks Kong

38580 fix webgui issue

Very Happy Very Happy


But there's no 38580 available from Kong yet, right?
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6154
Location: Netherlands

PostPosted: Thu Mar 21, 2019 20:27    Post subject: Reply with quote
Yes 38580 from 5 February is available
_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
ludovic
DD-WRT Novice


Joined: 27 Oct 2017
Posts: 16
Location: Europe

PostPosted: Fri Mar 22, 2019 6:00    Post subject: Reply with quote
Ah, thanks! I check http://ddwrt-kong.clonevince.fr once a week or so to see if there's a new release, and the latest listed there is 38570.


Clearly I shouldn't rely as much on the clonevince repo.
AlVal
DD-WRT Novice


Joined: 24 Jan 2015
Posts: 2

PostPosted: Mon Mar 25, 2019 11:58    Post subject: Reply with quote
How would I find out the changelog between the version I'm currently on
def one I got from kong's test folder - ddwrt reports it as "DD-WRT v3.0-r38326 std (01/18/19)"

and kong's latest test build discussed above

dd-wrt.K3_R7000.chk 2019-02-05 22:42

the changelog file doesn't seem to exist any more in http://www.desipro.de/ddwrt/K3-AC-Arm/

thank you
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 5762
Location: Romerike, Norway

PostPosted: Mon Mar 25, 2019 15:41    Post subject: Re: Do not use! KONG DD-WRT test build v3.0-r38570M (02/04/ Reply with quote
egc wrote:
Changes see: https://svn.dd-wrt.com//
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum