New Build 38937: BS 02-23-2019-r38937

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7197
Location: Texas, USA

PostPosted: Sun Feb 24, 2019 18:04    Post subject: New Build 38937: BS 02-23-2019-r38937 Reply with quote
Downloads: (if a link doesn't work, try another)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/02-23-2019-r38937/
ftp://ftp.dd-wrt.com/betas/2019/02-23-2019-r38937/
Alternate link: DD-WRT website
Note: to use wget (or curl) for CLI flash (`write {f/w} linux`), change the https to http, or use ftp (curl only)

Changelogs:
SVN* changelog since last build (38581)
Summary: (deprecated after 29739)
*Github mirror: https://github.com/mirror/dd-wrt/

Notes:
1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.10 and newer
2. krack fixes for Broadcom were completed in r33678, including k26 (33655) & k24 (33656); use build 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issue #4 below).
4. R6400v2 support added in r36811-36818, 36825, and 36826. R6700v3 support added in r36828-36840.

Issues, observations, and/or workarounds reported:
1. (egc) Policy-Based Routing broken if SFE enabled: 5900
quarkysg's PBR+SFE fix: 5986
2. Trendnet 81*DRU models are missing factory-to-flash
3. DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use: 6246
4. WDS does not work on ARM devices (only MIPS<->MIPS)
5. VAPs not working at boot (k3.10?); workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
6. K2.6 builds are broken since 38253(?); GUI issues: 6538

Important: if any issues are found, please provide log info (GUI syslog, `dmesg`, `cat /var/log/messages`).
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).

Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
[b]Router/Version: [/b]
[b]File: [/b]
[b]Kernel: [/b]
[b]Mode: [/b]
[b]Status: [/b]

WARNING: This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build.
Sponsor
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 408

PostPosted: Sun Feb 24, 2019 21:21    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r38937 std (02/23/19)
Kernel: Linux 4.4.176-rc1 #4841 SMP Sat Feb 23 10:17:45 CET 2019 armv7l
Previous: r38840
Mode/Status: Gateway / working
Reset: no
Issues/Errors: No issues so far.

Uptime: 2hrs
Temperatures: CPU 66.4 °C / WL0 49.5 °C / WL1 53.3 °C
flood404
DD-WRT User


Joined: 18 Dec 2013
Posts: 200

PostPosted: Sun Feb 24, 2019 21:57    Post subject: Reply with quote
Router/Version: 3700v3
File: K3.x mega nv64.bin
Kernel: k4.9
Mode: AP
Status: Flashed fine and working just fine.


Router/Version: Linksys 320N
File: k3.x 320n.bin trailed build
Kernel: K4.9
Mode: AP
Status: Flash and seems to be working fine


Router/Version: X64 computer duo core E7500
File: x64 bit free version
Kernel: K4.9
Mode: Gateway mode with NAS enabled
Status: Seems stable

Wish the httpd fix was in this build that made it eat 1 core of the cpu but will be in the next build for sure.
ewinz87
DD-WRT Novice


Joined: 18 Jan 2011
Posts: 2

PostPosted: Mon Feb 25, 2019 2:24    Post subject: Reply with quote
Router/Version: TP-Link Archer C8 v1
Firmware: DD-WRT v3.0-r38937
Kernel: 4.4.176-rc1
Previous: r38840
Mode: Gateway
Status: Noticed no problems thus far.
Reset: No
Issues/Errors: No issues so far.

Uptime: 3hrs
Temperatures: CPU 65.8 °C / WL0 45.0 °C / WL1 50.5 °C
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7197
Location: Texas, USA

PostPosted: Mon Feb 25, 2019 3:07    Post subject: Reply with quote
flood404 wrote:
Wish the httpd fix was in this build that made it eat 1 core of the cpu but will be in the next build for sure.


Yeah, that made no sense to me to leave that commit out of this build, unless the build was being compiled already when that commit was added.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7197
Location: Texas, USA

PostPosted: Mon Feb 25, 2019 13:56    Post subject: Cisco Linksys E4200 v1 Reply with quote
Router/Version: Cisco Linksys E4200 v1
File: dd-wrt.v24-38937_NEWD-2_K3.x_mega-e4200.bin
Firmware: DD-WRT v3.0-r38937M mega (02/23/19)
Kernel: Linux 3.10.108-d8 #23065 Sat Feb 23 17:11:22 CET 2019 mips
Previous: DD-WRT v3.0-r38840M mega (02/19/19)
Reset: No
Mode: Gateway/AP
Uptime: ~20 hrs
Status: OK
Issues/Errors:

No new errors, still testing wi-fi stability and dns resolution specifically over wi-fi with the following added dnsmasq config:

Code:
min-cache-ttl=800


ref: https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1157319#1157319
smask
DD-WRT Novice


Joined: 28 Jan 2016
Posts: 48
Location: The sofa

PostPosted: Mon Feb 25, 2019 21:26    Post subject: Netgear WNR2000v2 Reply with quote
Router: Netgear WNR2000v2
Firmware: ftp://ftp.dd-wrt.com/betas/2019/02-23-2019-r38937/broadcom_K26/dd-wrt.v24-38937_NEWD-2_K2.6_mini.bin (3 584 000 bytes)
Previous: r38840
Kernel: Linux 2.6.24.111 #6465 Sat Feb 23 02:22:49 CET 2019 mips
Load: 0.01, 0.06, 0.01 (1%)
Reset: Nope, I like it dirty.
Errors/Issues: Not yet. (Uptime 1h 33min)

_________________
WNDR4300 BS K3.18 r40559 (Main AP)
WNDR3700v3 r40009 (WAP)
--- Spares ---
R7000 BS K4.4 r40750 (Dead ethernet ports)
WNDR4000 BS K3.10 r31899 (Loaned out to tenant who lives in my old home)
WNR2000v2 BS K2.6 r39230 (bricks and giggles)
+ A bunch of WRT54GL:s

I use my routers with pretty basic configuration. Only having WiFi + BT coexist enabled.
I don't have any USB devices connected.
SinCalChewy
DD-WRT User


Joined: 09 Nov 2014
Posts: 311
Location: Bakersfield, CA

PostPosted: Tue Feb 26, 2019 10:51    Post subject: Reply with quote
Router/Version: 2x Linksys E3000
File: dd-wrt.v24-38937_NEWD-2_K3.x_mega-e3000.bin
Previous: dd-wrt.v24-38570_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.108-d8 #23065 Sat Feb 23 17:11:22 CET 2019 mips
Mode: Client bridges, with all settings not required turned off.
Status: So far so good :)

_________________

Deployed Routers:
Netgear R7000 - 4x build 44236M (Gateway: DoT/DoH, CAKE QoS, USB /w Entware)
Linksys E3000 - 1x build 44236M (Client Bridges)

Spares/Backups/Collection:
Too many to list. I have old routers, bricked routers, weird routers. You name it.
handbook
DD-WRT Novice


Joined: 26 Feb 2019
Posts: 1

PostPosted: Tue Feb 26, 2019 19:47    Post subject: Linksys WRT54GL Reply with quote
Router/Version: Linksys WRT54GL
Firmware: ftp://ftp.dd-wrt.com/betas/2019/02-23-2019-r38937/broadcom/dd-wrt.v24_std_generic.bin
Previous Firmware: ftp://ftp.dd-wrt.com/betas/2017/11-04-2017-r33679/broadcom/dd-wrt.v24_std_generic.bin
Kernel: Linux 2.4.37 #52233 Sat Feb 23 08:10:42 CET 2019 mips
Mode: Client Bridge
Reset: No
Uptime: 5+ hours
Status: No issues so far
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7197
Location: Texas, USA

PostPosted: Wed Feb 27, 2019 6:34    Post subject: Re: Cisco Linksys E4200 v1 Reply with quote
kernel-panic69 wrote:
Router/Version: Cisco Linksys E4200 v1
File: dd-wrt.v24-38937_NEWD-2_K3.x_mega-e4200.bin
Firmware: DD-WRT v3.0-r38937M mega (02/23/19)
Kernel: Linux 3.10.108-d8 #23065 Sat Feb 23 17:11:22 CET 2019 mips
Previous: DD-WRT v3.0-r38840M mega (02/19/19)
Reset: No
Mode: Gateway/AP
Uptime: ~20 hrs
Status: OK
Issues/Errors:

No new errors, still testing wi-fi stability and dns resolution specifically over wi-fi with the following added dnsmasq config:

Code:
min-cache-ttl=800


ref: https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1157319#1157319


new serial console error message: setsockopt(SO_RCVTIMEO): Not a socket

Also, no change in wi-fi functionality. Still seems to act up in DNS resolution with dnsmasq. Sometimes after a couple of hours, sometimes following day.

Currently testing the following changed additional options:

Code:
min-cache-ttl=3600
cache-size=1000


Seems that the 800 setting may not quite resolve the issue, unless it is actually a driver-related issue. Not having to monkey around with this on FreshTomato 2019.1 Rolling Eyes
mlt
DD-WRT Novice


Joined: 12 Sep 2014
Posts: 17

PostPosted: Wed Feb 27, 2019 21:11    Post subject: Buffalo WZR-600DHP2 freezes after a while Reply with quote
Router/Version: Buffalo WZR-600DHP2
Firmware: DD-WRT v3.0-r38937 std (02/23/19)
Kernel: Linux 4.4.176-rc1 #4845 Sat Feb 23 10:52:45 CET 2019 armv7l
Previous: ??? somewhere mid November 2018
Mode: Repeater
Reset: No
Status: Freezes over time. Happened 4 times over 24 hrs. Inability to use either wired or wireless network. All LED lights are lit as normal. No blinking though.

Kind of sad:( I'll try to slowly rollback a few versions to see when it was stable.
aaronburro
DD-WRT Novice


Joined: 12 Nov 2018
Posts: 33

PostPosted: Thu Feb 28, 2019 13:56    Post subject: Reply with quote
Router/Version: Linksys E3000
File: dd-wrt.v24-38937_NEWD-2_K3.x_mega-e3000.bin
Previous: dd-wrt.v24-36006_NEWD-2_K3.x_mega-e3000.bin
Mode: DDNS, OpenVPN, Router, DHCP disabled, Wireless disabled, WAN disabled, WAN port assigned to switch
Status: Seems to be good so far (Uptime 1d, 11hr)
flood404
DD-WRT User


Joined: 18 Dec 2013
Posts: 200

PostPosted: Fri Mar 01, 2019 2:28    Post subject: Re: Buffalo WZR-600DHP2 freezes after a while Reply with quote
mlt wrote:
Router/Version: Buffalo WZR-600DHP2
Firmware: DD-WRT v3.0-r38937 std (02/23/19)
Kernel: Linux 4.4.176-rc1 #4845 Sat Feb 23 10:52:45 CET 2019 armv7l
Previous: ??? somewhere mid November 2018
Mode: Repeater
Reset: No
Status: Freezes over time. Happened 4 times over 24 hrs. Inability to use either wired or wireless network. All LED lights are lit as normal. No blinking though.

Kind of sad:( I'll try to slowly rollback a few versions to see when it was stable.



Im going to bet the non locking up or freezing version will be r38581 It started to happen in newer releases after this one.
flood404
DD-WRT User


Joined: 18 Dec 2013
Posts: 200

PostPosted: Fri Mar 01, 2019 2:43    Post subject: Re: Netgear WNR2000v2 Reply with quote
smask wrote:
Router: Netgear WNR2000v2
Firmware: ftp://ftp.dd-wrt.com/betas/2019/02-23-2019-r38937/broadcom_K26/dd-wrt.v24-38937_NEWD-2_K2.6_mini.bin (3 584 000 bytes)
Previous: r38840
Kernel: Linux 2.6.24.111 #6465 Sat Feb 23 02:22:49 CET 2019 mips
Load: 0.01, 0.06, 0.01 (1%)
Reset: Nope, I like it dirty.
Errors/Issues: Not yet. (Uptime 1h 33min)



I have two of those routers. They have excellent radio's in them. The only downside its a 10/100mbps router. I can almost access my wifi at the end of the street here with those. I am surprised the r38937 loaded. I may dig mine out and flash it to see if takes it. Does the WebGUI work? I know I had issues with a linksys 320N using the k2.6 build for it.
smask
DD-WRT Novice


Joined: 28 Jan 2016
Posts: 48
Location: The sofa

PostPosted: Fri Mar 01, 2019 6:11    Post subject: Re: Netgear WNR2000v2 Reply with quote
flood404 wrote:
I have two of those routers. They have excellent radio's in them. The only downside its a 10/100mbps router. I can almost access my wifi at the end of the street here with those. I am surprised the r38937 loaded. I may dig mine out and flash it to see if takes it. Does the WebGUI work? I know I had issues with a linksys 320N using the k2.6 build for it.


Web GUI works, but I haven't done any testing on it. The 2000v2 lives in my spares collection. I loaded the latest firmware to see if it still worked (r38535) Don't load -nv64k.bin firmwares because those bricks the router even if they only are 1k bytes bigger.

Loaded the plain mini r38535 by a lucky mistake. (RouterDb recommends -nv64k builds, and listed big and mega builds?)
Bricked it by loading mini r38570-nv64k. (RouterDb told me to use -nv64k)
Serial recovery to r15962 (tried the 2000v2 r38570.chk and r38535.chk but those bricked it again. Tralied builds are -nv64k)
Loaded the plain mini r38840 and then the plain mini r38937.

You might have to factory reset the settings going from a -nv64k build to a plain one. I haven't tested if -nv60k builds work.

_________________
WNDR4300 BS K3.18 r40559 (Main AP)
WNDR3700v3 r40009 (WAP)
--- Spares ---
R7000 BS K4.4 r40750 (Dead ethernet ports)
WNDR4000 BS K3.10 r31899 (Loaned out to tenant who lives in my old home)
WNR2000v2 BS K2.6 r39230 (bricks and giggles)
+ A bunch of WRT54GL:s

I use my routers with pretty basic configuration. Only having WiFi + BT coexist enabled.
I don't have any USB devices connected.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum