New Build 39230: BS 03-19-2019-r39230

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 391

PostPosted: Tue Mar 19, 2019 20:08    Post subject: New Build 39230: BS 03-19-2019-r39230 Reply with quote
Downloads: (if a link doesn't work, try another)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/03-19-2019-r39230/
ftp://ftp.dd-wrt.com/betas/2019/03-19-2019-r39230/
Alternate link: DD-WRT website
Note: to use wget (or curl) for CLI flash (`write {f/w} linux`), change the https to http, or use ftp (curl only)

Changelogs:
SVN* changelog since last build: 39144
Summary: (deprecated after 29739)
*Github mirror: https://github.com/mirror/dd-wrt/

Notes:
1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.10 and newer
2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use build 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issue #4 below).
4. R6400v2 support added in r36811-36818, 36825, and 36826. R6700v3 support added in r36828-36840.

Issues, observations, and/or workarounds reported:
1. (egc) Policy-Based Routing broken if SFE enabled: 5900
quarkysg's PBR+SFE fix: 5986
2. Trendnet 81*DRU models are missing factory-to-flash
3. DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use: 6246
4. WDS does not work on ARM devices (only MIPS<->MIPS)
5. VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
6. K2.6 builds are broken since 38253(?); GUI issues: 6538
7. High CPU usage (on httpd?) occurring for some configurations: 6555
Try `stopservice httpd` from ssh/telnet and report back. To flash another build, stop httpd and use CLI flash.

Important: if any issues are found, please provide log info (GUI syslog, `dmesg`, `cat /var/log/messages`).
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).

Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
[b]Router/Version: [/b]
[b]File: [/b]
[b]Kernel: [/b]
[b]Mode: [/b]
[b]Status: [/b]

WARNING: This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build.
Sponsor
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 391

PostPosted: Tue Mar 19, 2019 20:13    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r39230 std (03/19/19)
Kernel: Linux 4.4.176 #5200 SMP Tue Mar 19 08:12:26 CET 2019 armv7l
Previous: r39144
Mode/Status: Gateway / working
Reset: no
Issues/Errors: No issues so far.

Uptime: 22m
Temperatures: CPU 68.0 °C / WL0 48.0 °C / WL1 53.8 °C
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 6557
Location: Texas, USA

PostPosted: Wed Mar 20, 2019 1:31    Post subject: Cisco Linksys E4200 v1 Reply with quote
Router/Version: Cisco Linksys E4200 v1
File: dd-wrt.v24-39230_NEWD-2_K3.x_mega-e4200.bin
Firmware: DD-WRT v3.0-r39230M mega (03/19/19)
Kernel: Linux 3.10.108-d8 #23576 Tue Mar 19 14:34:59 CET 2019 mips
Previous: DD-WRT v3.0-r39144M mega (03/11/19)
Reset: No
Mode: Gateway/AP
Uptime: ~4.5 hrs
Status: OK
Issues/Errors:

No new errors.
labrok
DD-WRT User


Joined: 11 Feb 2011
Posts: 267
Location: Greece

PostPosted: Wed Mar 20, 2019 10:55    Post subject: Dlink Dir868L rev C Reply with quote
same issue as the last 5-6 releases, remote web conmnerction makes cpu showing crazy usages, happening only in http connection, https hasnt this issue but has other problems which makes it a bad idea for remote connection (for me it works sometimes, but some other times it doesnt)will anyone fix it??
audia3
DD-WRT Novice


Joined: 10 Mar 2018
Posts: 38

PostPosted: Wed Mar 20, 2019 20:57    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: DD-WRT v3.0-r39230M big (03/19/19)
Kernel: Linux 3.10.108-d8 #23572 Tue Mar 19 14:30:54 CET 2019 mips
Mode: AP
Status: Working

Seems to be working okay. This is the first build since 03/05/2019 that has been able to hold an internet connection through USB tethering when I do a speed test.
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1501
Location: Belgrade

PostPosted: Wed Mar 20, 2019 21:03    Post subject: Reply with quote
Router Model Netgear R6250
Firmware Version DD-WRT v3.0-r39230 std (03/19/19)
Kernel Version Linux 4.4.176 #5200 SMP Tue Mar 19 08:12:26 CET 2019 armv7l


Status: Working (pppoe, ipv6in4, wireguard, ap both bands, QoS)
Reset: No
Errors: No

Thx BS. Very stable build...
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1501
Location: Belgrade

PostPosted: Wed Mar 20, 2019 21:12    Post subject: Re: Dlink Dir868L rev C Reply with quote
labrok wrote:
same issue as the last 5-6 releases, remote web conmnerction makes cpu showing crazy usages, happening only in http connection, https hasnt this issue but has other problems which makes it a bad idea for remote connection (for me it works sometimes, but some other times it doesnt)will anyone fix it??


why remote web? if you look at logs when remote web is enabled you'll see hundreds login attempts per minute on remote web port... hacker hammering and hammering... did you tried wireguard

it's very easy to setup. just couple of steps... and almost invisible for port scanners...
SinCalChewy
DD-WRT User


Joined: 09 Nov 2014
Posts: 307
Location: Bakersfield, CA

PostPosted: Thu Mar 21, 2019 9:34    Post subject: Reply with quote
Router/Version: 2x Linksys E3000
Firmware: dd-wrt.v24-39230_NEWD-2_K3.x_mega-e3000.bin
Previous: dd-wrt.v24-39144_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.108-d8 #23576 Tue Mar 19 14:34:59 CET 2019 mips
Mode: Client bridges with all settings not -required- for a bridge turned off.
Status: So far good, will report back if anything comes up! :)

Router/Version: Trendnet TEW811DRU
Firmware: DD-WRT v3.0-r39230 mini (03/19/19)
Previous: DD-WRT v3.0-r39144 mini (03/11/19)
Kernel: Linux 4.4.176 #5203 Tue Mar 19 08:32:19 CET 2019 armv7l
Mode: AC-Only client bridge with all settings not -required- for a bridge turned off.
Status: Seems up to par! Once again, will return if something comes up! :)

Router/Version: Linksys E1200 v2
Firmware: dd-wrt.v24-39230_NEWD-2_K3.x_mega-e1200v2.bin
Previous: dd-wrt.v24-39144_NEWD-2_K3.x_mega-e1200v2.bin
Kernel: Linux 3.10.108-d8 #23576 Tue Mar 19 14:34:59 CET 2019 mips
Mode: Repeater for our guests to use.
Status: Seems up to par! Once again, will return if something comes up! Though this one is rarely used. Lol :)

_________________

Deployed Routers:
Netgear R7000 - 3x build 43171M (Gateway: DoT/DoH, CAKE QoS, USB /w Entware)
Linksys E3000 - 2x build 43171M (Client Bridges)

Spares/Backups/Collection:
Too many to list. I have old routers, bricked routers, weird routers. You name it.
ERGON
DD-WRT Novice


Joined: 25 Aug 2016
Posts: 4

PostPosted: Thu Mar 21, 2019 10:56    Post subject: Re: Dlink Dir868L rev C Reply with quote
Mile-Lile wrote:
labrok wrote:
same issue as the last 5-6 releases, remote web conmnerction makes cpu showing crazy usages, happening only in http connection, https hasnt this issue but has other problems which makes it a bad idea for remote connection (for me it works sometimes, but some other times it doesnt)will anyone fix it??


why remote web? if you look at logs when remote web is enabled you'll see hundreds login attempts per minute on remote web port... hacker hammering and hammering... did you tried wireguard

it's very easy to setup. just couple of steps... and almost invisible for port scanners...


I believe that labrok would be understood the use of Web-GUI makes increase the CPU utilization (even up to 100%). Also I agree.
In advance, I thank developers for the solution of this problem.
audia3
DD-WRT Novice


Joined: 10 Mar 2018
Posts: 38

PostPosted: Thu Mar 21, 2019 22:09    Post subject: Reply with quote
audia3 wrote:
Router/Version: Asus RT-N66U
File: DD-WRT v3.0-r39230M big (03/19/19)
Kernel: Linux 3.10.108-d8 #23572 Tue Mar 19 14:30:54 CET 2019 mips
Mode: AP
Status: Working

Seems to be working okay. This is the first build since 03/05/2019 that has been able to hold an internet connection through USB tethering when I do a speed test.


Oops -- I posted too soon. The router still loses internet during the upload portion of a speed test. Oh well...
knob-creek
DD-WRT Novice


Joined: 29 Nov 2013
Posts: 33
Location: Düsseldorf, Germany

PostPosted: Fri Mar 22, 2019 14:41    Post subject: Reply with quote
Do the connections between WLAN clients (esp. between 2.4 and 5 GHz bands) work again or are clients still randomly isolated?
Zyxx
DD-WRT User


Joined: 28 Dec 2018
Posts: 200

PostPosted: Fri Mar 22, 2019 20:54    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-39230_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r39230M big (03/19/19)
Kernel: Linux 3.10.108-d8 #23572 Tue Mar 19 14:30:54 CET 2019 mips
Mode: Gateway, Wifi disabled
Reset: No
Status: automatic reboot (keep alive) not working, up since a few hours after release

Router/Version: Asus RT-N12B
File: dd-wrt.v24-39230_NEWD-2_K3.x_mega_RT-N12B1.trx (D1 revision uses same HW as B1)
Firmware: DD-WRT v3.0-r39230M mega (03/19/19)
Kernel: Linux 3.10.108-d8 #23576 Tue Mar 19 14:34:59 CET 2019 mips
Mode: Gateway, connected via WAN to N66U
Reset: No
Status: working as intended automatic restart does work, up since a few hours after release

Any ideas how to track down, why the reboot does not work? There are no hints in the Syslog.
Also automatic reconnect does function, only keep alive seems to not work.

Had a look in cron.d but the jobs do not seem to be stored there?

Also since SFE tends to not function proper on the little n12 (connections on wifi devices get sluggish over time)... what are the advantages of this technique at all?
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 6557
Location: Texas, USA

PostPosted: Sat Mar 23, 2019 2:26    Post subject: Re: Cisco Linksys E4200 v1 Reply with quote
Unable to upgrade past this build via webUI . Tried rebooting first, nothing.

EDIT: RE-selecting "don't reset" on firmware upgrade page seems to have made it want to work.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum