wnr3500L v2 помогите поставить прошив

Post new topic   Reply to topic    DD-WRT Forum Index -> Оборудование на основе Broadcom
Author Message
kototmoto
DD-WRT Novice


Joined: 09 Feb 2019
Posts: 3

PostPosted: Sat Feb 09, 2019 14:20    Post subject: wnr3500L v2 помогите поставить прошив Reply with quote
Привет всем. Я прописал "erase linux" в dd-wrt и это сделало мой роутер кирпичём. По LAN к нему не подключится, так что я подключился по ttl и увидел следующее:

Code:
CFE for WNR3500Lv2 version: v1.0.9
Build Date: Fri May 6 11:54:17 CST 2011
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
NFLASH Boot partition size = 524288(0x80000)
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.136
CPU type 0x19749: 480MHz
Tot mem: 131072 KBytes

Device eth0: hwaddr C4-04-15-0A-BB-E8, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Checking crc...Invalid boot block on disk
Device eth0 has been deactivated.
Device eth0: hwaddr C4-04-15-0A-BB-E8, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Start TFTP server
Reading :: Failed.: Interrupted
Found a AMD NAND flash with 2048B pages or 128KB blocks; total size 128MB
Decompressing...done


Это просто повторяется, пока я не нажму ctrl-C, на команду help он говорит, что команда не валидна, а её статус -1. Не могу использовать tftpd потому что, опять же LAN не работает. Само LAN подключение роутер видит(диод горит жёлтым), но подключение не устанавливается.

Что мне сдалеть, чтобы я смог перепрошить роутер?
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Оборудование на основе Broadcom All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum