Posted: Sat Sep 26, 2015 14:18 Post subject: [solved] ddwrt & huawei 3372 hilink
I have installed the dd-wrt kong mod version, all is fine, except the internet connection.
i tried several tipps on the internet without success. ok stop i got it to work, but it's no option.
the only way to get it to work is:
1. WAN Type = Mobile Broatband
2. Services = USB Core Support enabled
3. Startup Script = insmod usbnet; insmod cdc_ether
5. ifconfig -a => eth3 to set it up -> ifconfig eth3 up
6. There is no way to get an IP or to set on, so
7. Change WAN Type from "mobile broadband" to "DHCP"
8. uhcpc -i eth3
9. Internet works
But after a reboot its the same game... and very boring.
I would be happy if someone could help me, after ours I am giving up...
thx & so long
Last edited by trustno1foxm on Fri Oct 02, 2015 18:15; edited 1 time in total
Looking for default devices ...
found matching product ID
Found device in default mode, class or configuration (1)
Accessing device 002 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using interface number 0
Using endpoints 0x01 (out) and 0x81 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
No driver found. Either detached before or never attached
SCSI inquiry data (for identification)
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
USB description data (for identification)
Manufacturer: HUAWEI Technology
Product: HUAWEI Mobile
Serial No.: 0123456789ABCDEF
Warning: no switching method given.
-> Run lsusb to note any changes. Bye.
"udhcpc -i eth0" doesn't lead to a WAN connection
Posted: Tue Mar 15, 2016 22:13 Post subject: Asus RT-N18U, Huawei EC5373u-819, Mobile Broadband, HiLink
Hardware and DD-WRT info as follows:
Router with DD-WRT:
Router Model: Asus RT-N18U
Firmware Version: DD-WRT v24-sp2 (05/27/14) std - build 24160M
Kernel Version: Linux 3.10.40 #2701 Tue May 27 05:52:37 CEST 2014 armv7l
4G USB / WIFI router info:
Device name: Huawei EC5373u-819
Hardware version: CL1EC5377UM
Software version: 11.432.04.00.45
Web UI version: 16.100.02.01.45
Huawei is working well independently with WIFI connection but trying to plug in Asus' router USB and to utilize its broadband connection, Asus router with DD-WRT doesn't recognize WAN (broadband connection) with WAN as DHCP type.
Posted: Sun Jun 26, 2016 10:41 Post subject: Re: wrt1900acs and e3372h (hilink)
what is the current status?
Is the broadband modem connection with Kong's build 29900 now working?
Yes hilink is working, but right now cannot be configured through the webif. On my routers I configure/switch between different modes e.g. mobile wan through LTE, wireless client as wan etc. through a custom app that connects to a webservice on the router:-)
The app also displays info from the hilink interface such a signal strength etc., but this is not public atm. If I get really bored I'll add hilink support to the webif, but this is low prio for me. _________________ KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/