Router: Netgear R7800
Firmware: DD-WRT v3.0-r38570 std (02/04/19)
Kernel: Linux 4.9.154 #254 SMP Fri Feb 1 18:24:12 CET 2019 armv7l
Status: Working
Reset: No
Previous: 38340
Errors: No
Temperatures : CPU 42.402 °C / ath0 18 °C / ath1 18 °C
Working very well :
Router mode : DHCP
SFE Enable STP Enable
DNSMasq
Encrypt DNS
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Local DNS
No DNS Rebind
Query DNS in Strict Order
ath0, ath1
Vpn (OpenVPN Client)
Router Model TP-Link TL-WR841ND v11
Firmware Version DD-WRT v3.0-r38570 std (02/04/19)
Kernel Version Linux 3.18.133 #31576 Mon Feb 4 03:03:32 CET 2019 mips
Update: via LAN/GUI from r38535
Reset: yes, after update
Status: Working OK as AP, HT40, QOS.
Joined: 04 Dec 2013 Posts: 91 Location: Râmnicu Vâlcea, România
Posted: Mon Feb 04, 2019 23:38 Post subject:
Router: TP-LINK TL-WDR3600 v1.4
Status: OK
Reset: No
Errors:
- 5GHz band LED indicator still off;
- Clone WAN MAC broken. When I press Get Current PC MAC Address all that tiny boxes become 0:0:0:0:0:0:0
Netgear wndr3700v2, r38570, Linux 3.10.108, AP
Netgear wndr4300, r38570, Linux 3.18.133, 1 AP and 1 Gateway
TP-Link wr841ndv9, r38570, Linux 3.18.133, AP
I encounter two problems/errors:
-At least since r38507, "httpd -p 80" process ends up eating as much CPU as available, so load reaches 100%. Can't tell what is causing this behaviour, but it does not occur at startup time, and occurs very easily when accessing via distant ssh. Remark: https is not enabled.
-Since an undetermined number (a lot) of revisions, router slows down or even fails to route data after a few working hours under high wan load. Disconnect/reconnect the Wifi connected device solves the problem for a short while, but then it occurs again. Sticking to "vegas" TCP Congestion Control instead of "westwood" may be a workaround. Occurs with wndr3700v2 and wndr4300, wr841ndv9 not tested.
So, I am rolling back to r36995 with "vegas" TCP Congestion Control, which seems to work.
Routers:"httpd -p 80" process ends up eating as much CPU as available, so load reaches 100%.
Thought I would check after reading your post .... yea that's crap but it aint httpd doing it ---
WNDR3700v4 r38570
Uptime 1 day, 5:26
Not sure what it is. This unit is really just a switch.
Both radios are disabled and haven't been in its webif in hours.
Nothing has connecetd to its samba share in hours and no one has connected to its ovpn server in at least 5 hrs.
hummm... it's all still working but just something eating up CPU.
I don't recall seeing this before in other builds but I hardly ever look at it as long as what I use works.
EDIT:
I had a 'look-see' at it and just taint gonna worry too much
###
EDIT2: FYI -- BS fixed--the r38578 on WNDR3700v4 no longer shows in GUI high CPU load. up 14:33
