Author
Message
gradash DD-WRT Novice Joined: 09 Jan 2019 Posts: 5
Posted: Fri Jan 11, 2019 12:43 Post subject: EA6200 cant enter CFE
cant enter CFE shell... with USB TTL device, minicom, screen, putty... I can see loading process, but doesn't matter how fast I spam CTRL+C - loading continues, what wrong ?
Description:
Filesize:
25.73 KB
Viewed:
1430 Time(s)
Back to top
Sponsor
kernel-panic69 DD-WRT Guru Joined: 08 May 2018 Posts: 14246 Location: Texas, USA
Posted: Fri Jan 11, 2019 15:04 Post subject:
Apply power as you spam CTRL+C. Timing is everything.
Back to top
jwh7 DD-WRT Guru Joined: 25 Oct 2013 Posts: 2670 Location: Indy
Posted: Fri Jan 11, 2019 16:03 Post subject:
Is the text input actually working? But yes, the time to break CFE is very short.
_________________# NAT/SFE /CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ , Builds , Types , Modes , Changes , Demo #
OPNsense x64 5050e ITX|DD : DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250 |FreshTomato: F7D8302@532 |OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Back to top
Kippiis DD-WRT Novice Joined: 27 Dec 2018 Posts: 1
Posted: Sat Jan 12, 2019 15:05 Post subject:
jwh7 wrote: Is the text input actually working? But yes, the time to break CFE is very short.
Thank you! My text input didn't work and I was scretching my head trying to figure out what's wrong...
Back to top
gradash DD-WRT Novice Joined: 09 Jan 2019 Posts: 5
Posted: Mon Jan 14, 2019 7:33 Post subject:
jwh7 wrote: Is the text input actually working? But yes, the time to break CFE is very short.
you mean is keyboard working ? yes... in terminal i see some symbols when pressing ctrl+c
Back to top
gradash DD-WRT Novice Joined: 09 Jan 2019 Posts: 5
Posted: Wed Jan 23, 2019 8:33 Post subject:
no, not in linux, not in windows... just loading into factory firmware, can CFE be corrupted and not loading ?
Description:
Filesize:
111.39 KB
Viewed:
1296 Time(s)
Back to top
kernel-panic69 DD-WRT Guru Joined: 08 May 2018 Posts: 14246 Location: Texas, USA
Posted: Wed Jan 23, 2019 12:39 Post subject:
Wondering if you have an intermittent ground lead issue or if TX and RX are in the wrong position, or if it's your keyboard or whatever program you're using not being setup 100% correctly. Looks as if your keyboard input is being ignored.
Back to top