New Build: R38507 (1-29-2019)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 187

PostPosted: Tue Jan 29, 2019 21:20    Post subject: New Build: R38507 (1-29-2019) Reply with quote
Firmware Version
DD-WRT v3.0-r38507 std (01/29/19)
Kernel Version
Linux 4.9.153 #766 SMP Tue Jan 29 02:29:23 CET 2019 armv7l

_________________
WRT1900ACSv2
Sponsor
scar1943
DD-WRT User


Joined: 10 Nov 2018
Posts: 131
Location: South Carolina

PostPosted: Wed Jan 30, 2019 0:33    Post subject: DD-WRT v3.0-r38507 std (01/29/19) Reply with quote
WRT3200ACM V1 r38507 Firefox 64.0.2 (64-bit) webflash

OpenVPN CLIENT works fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
NAS via USB Samba also working fine
pbphoto
DD-WRT Novice


Joined: 29 Oct 2017
Posts: 32

PostPosted: Wed Jan 30, 2019 0:55    Post subject: Reply with quote
Upgraded from 38381 (which had been running fine for ~3 days) via the GUI with Safari. No issues so far. Performance is excellent.

Linksys WRT3200ACM: gateway mode, DNSMasq for DNS and DHCP, OpenVPN client (Mullvad), Firewall enabled, QoS enabled, PBR enabled (SFE disabled). WIFI: 2.4ghz: G-only, 20mhz channel width, channel 1, WPA2-CCMP-128. 5ghz: AC/N mixed, 80mhz channel width, channel 100+6, WPA2-CCMP-128.

Linksys WRT1900ACS: router mode, hardwired ethernet lan to WRT3200ACM above. WIFI: 2.4ghz: G-only, 20mhz channel width, channel 6, WPA2-CCMP-128. 5ghz: AC/N mixed, 80mhz channel width, channel 52+6, WPA2-CCMP-128.
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 96

PostPosted: Thu Jan 31, 2019 0:04    Post subject: Reply with quote
Upgraded with no issues. All working well. Performance normal.
_________________
LinkSys WRT3200ACM
DD-WRT v3.0-r40134 std (06/27/19)
DNSMasq,Local DNS
CloudFlare DNS
ExpressVPN OpenVPN Client
Static Leases & DHCP
2.4 & 5GHz clients
Comcast 1Gbps/35Mbps
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 95
Location: FL

PostPosted: Fri Feb 01, 2019 1:29    Post subject: Reply with quote
Wened, Ok some new updates, The modem we connect to over here ended up just burning its self out so we replaced it.
This current firmware has been running with no problems what so ever since its release. SO the others could have been working as well i am not sure but all i know is all is peachy right here right now this Current firmware.

Extra notes:
Speed is awesome on this firmware wifi wise, Tons of transfers between neighbor and I across the 5 acres of land.

Also connect at 95% to 100% Signal Quality HT20SGI from that distance on wireless status page.

Also like to note this router always has high traffic with 4 devices or better most times doing more then the normal causal user would. ill leave it at that.

_________________
Issues:
1. VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
ALTERNATE for VAP issue run command ifconfig ath0.1 down then ifconfig ath0.1 up ( works better for me )

Linksys WRT1900ACv1 07-12-2019-r40276
WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel 6, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 80mhz channel width, channel 100+6, WPA2-CCMP-128.
Misc Info: Wireless Mode: "Client" WPA2 Personal: "CCMP-128 (AES)", Virtual Wireless AP "2.4 + 5ghz", Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv Opendns for Dns, Short Preamble Short GI
WENED
DD-WRT User


Joined: 30 May 2017
Posts: 249
Location: Rural Manitoba

PostPosted: Fri Feb 01, 2019 2:21    Post subject: Reply with quote
PIZZEDMEOFF wrote:
Wened, Ok some new updates, The modem we connect to over here ended up just burning its self out so we replaced it.
This current firmware has been running with no problems what so ever since its release. SO the others could have been working as well i am not sure but all i know is all is peachy right here right now this Current firmware.

Extra notes:
Speed is awesome on this firmware wifi wise, Tons of transfers between neighbor and I across the 5 acres of land.

Also connect at 95% to 100% Signal Quality HT20SGI from that distance on wireless status page.

Also like to note this router always has high traffic with 4 devices or better most times doing more then the normal causal user would. ill leave it at that.


Good to hear that you are up and running. I have yet to move up to r38507 since I am not having any problems, but I may do so this weekend. As I said before don't hestitate to ask here on the forum. There is a wealth of information available.
Best of luck with your surfing!

_________________
WRT3200acm Master 5GHz AP r40009
WRT3200acm Client-Bridge r40009
WRT1900Ac V1 Client-Bridge r40009
WRT1900AC V1 Client-Bridge r40009
WRT1900AC V1 Client-Bridge r40009
WRT1200AC V1 SPARE r40009
WRT54G DD-WRT v3.0-r37305 micro Client-Bridged for 1 IP Camera
EX6200 DD-WRT r38535 - Spare
EX7000 Stock Firmware Spare
Devices and Cameras and Sensors
12 WiFi cameras, 4 desktops, 1 laptop, 10 Sonoff Basic/TH16, Artisan 700 Printer, Ongoing testing of other devices.
WENED
DD-WRT User


Joined: 30 May 2017
Posts: 249
Location: Rural Manitoba

PostPosted: Fri Feb 01, 2019 16:10    Post subject: r38507 Reply with quote
Upgraded from r38381 -> r38507

MS Edge LAN connect to 3200 -
MS Edge WiFi WDS to 3200
MS Edge WiFi WDS to 1900 V1

Had to reboot Master to re-establish PPoE Internet. Same as previous builds

Sonoff (ESP8266) still won't connect to 3200 with wmm enabled.

Disabled Telenet as continuous attempted access "Unknown" on PTS0

Otherwise all devices working as before.

_________________
WRT3200acm Master 5GHz AP r40009
WRT3200acm Client-Bridge r40009
WRT1900Ac V1 Client-Bridge r40009
WRT1900AC V1 Client-Bridge r40009
WRT1900AC V1 Client-Bridge r40009
WRT1200AC V1 SPARE r40009
WRT54G DD-WRT v3.0-r37305 micro Client-Bridged for 1 IP Camera
EX6200 DD-WRT r38535 - Spare
EX7000 Stock Firmware Spare
Devices and Cameras and Sensors
12 WiFi cameras, 4 desktops, 1 laptop, 10 Sonoff Basic/TH16, Artisan 700 Printer, Ongoing testing of other devices.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum