Asus N18U - VAP not working after reboot

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
gchulio
DD-WRT Novice


Joined: 09 Jul 2015
Posts: 11

PostPosted: Fri Nov 30, 2018 12:30    Post subject: Asus N18U - VAP not working after reboot Reply with quote
Router: Asus RT-N18U
Firmware: DD-WRT v3.0-r37736 (17/11/2018)
Status: semi Working
Reset: Yes, before and after
Previous: 30605
Errors: No

As soon as I set up a VAP, it does not work after reboot, telling me the password is not valid.
On other three routers with Kong mod R7000, AC68U and EA6900 (r36070M) everything works fine with the identical VAP on all routers.

Can you recommend me a recent BS build from 2018 where VAP works (also tried several builds back to r36079 with the same result, VAP not working) ?

Many thanks !
gchulio
Sponsor
diogosena
DD-WRT Novice


Joined: 11 Jun 2011
Posts: 44

PostPosted: Fri Nov 30, 2018 15:20    Post subject: Re: Asus N18U - VAP not working after reboot Reply with quote
gchulio wrote:
Router: Asus RT-N18U
Firmware: DD-WRT v3.0-r37736 (17/11/2018)
Status: semi Working
Reset: Yes, before and after
Previous: 30605
Errors: No

As soon as I set up a VAP, it does not work after reboot, telling me the password is not valid.
On other three routers with Kong mod R7000, AC68U and EA6900 (r36070M) everything works fine with the identical VAP on all routers.

Can you recommend me a recent BS build from 2018 where VAP works (also tried several builds back to r36079 with the same result, VAP not working) ?

Many thanks !
gchulio


Every kong build after r36070M has VAP issues on my AC68u, try any build before that, and VAP should be ok, even for BS builds.
jwh7
DD-WRT Guru


Joined: 25 Oct 2013
Posts: 2616
Location: Indy

PostPosted: Fri Nov 30, 2018 16:17    Post subject: Re: Asus N18U - VAP not working after reboot Reply with quote
gchulio wrote:
As soon as I set up a VAP, it does not work after reboot, telling me the password is not valid.
On other three routers with Kong mod R7000, AC68U and EA6900 (r36070M) everything works fine with the identical VAP on all routers.

Can you recommend me a recent BS build from 2018 where VAP works (also tried several builds back to r36079 with the same result, VAP not working) ?
Ya, the BS builds aren't fixed for this yet. Have you tried the workaround for this?
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1148677#1148677

_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
x64 OPNsense 20.7.6|FT2020.6: EA6900v1.1@1GHz, F7D8302@532|DD 45036: DIR-810L, WNDR4500v2 & 4000@533,
R6300v1, RT-N66U@663, E1500@353, WRT54G{Lv1.1,Sv6}@250
|OpenWRT 19.7.5: RT-ACRH13, R6220, WNDR3700v4
gchulio
DD-WRT Novice


Joined: 09 Jul 2015
Posts: 11

PostPosted: Sat Dec 01, 2018 9:08    Post subject: Re: Asus N18U - VAP not working after reboot Reply with quote
jwh7 wrote:
gchulio wrote:
As soon as I set up a VAP, it does not work after reboot, telling me the password is not valid.
On other three routers with Kong mod R7000, AC68U and EA6900 (r36070M) everything works fine with the identical VAP on all routers.

Can you recommend me a recent BS build from 2018 where VAP works (also tried several builds back to r36079 with the same result, VAP not working) ?
Ya, the BS builds aren't fixed for this yet. Have you tried the workaround for this?
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1148677#1148677


Yes I tried the workaround beforehand, unfortunately it didn't work.
I found r33555 to work with the Asus RT-N18U. Funnily the effect is the other way around, the VAP works after reboot, but not when you set it first.
Not sure if it has to do something with the fact, that I used macOS / iOS devices to test it, although as written for the other routers with Kong mod r36070M there are no issues.
Happy now, it works.
cheers gchulio
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum