Link DIR-882 (probably DIR-878 too)@37305: VAP and bridge

Post new topic   Reply to topic    DD-WRT Forum Index -> Ralink SoC based Hardware
Author Message
Banshee
DD-WRT Novice


Joined: 29 Nov 2018
Posts: 2

PostPosted: Thu Nov 29, 2018 11:30    Post subject: Link DIR-882 (probably DIR-878 too)@37305: VAP and bridge Reply with quote
Hi there,

I'm facing a problem with the above mentioned router with DD-WRT v3.0-r37305 std (10/10/1Cool:

2.4 GHz: Adding a Virtual access point: Everything is OK (randomized HWAddr, interface is added to the bridge br0

5 GHz: Adding the first VAP gives a HWAddr of 00:00:00:00:00:00 and the bridge is not build correct (Setup -> Networking)
Code:
br0   no   ba0 ra0 ra1 vlan1 vlan2

(where ba0 is the 5GHz and ra0/ra1) are 2.4 GHz physical and 1st VAP

I can add it manually (Setup -> Networking) Assign to Bridge -> br0 + ba1 and it works! Smile

Albeit this is a little bit cumbersome.

NB: "ifconfig" shows randomized HWAddr for b1 / not reflected in the WebGUI

Any thoughts on this? Thanks in advance!
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum