right now only these products has limitation on firmware: Archer C7 V2, Archer C1900 V1, Touch P5 V1, Archer C2600 V1, Archer C3200 V1, Archer C2 V1, Archer C5 V2, Archer C8 V1 ,Archer C9 V1, TL-WR841N V11, TL-WDR3500 V1, TL-WR940N V3.0, TL-WR1043ND V3.0, TL-WR710N(USA), TL-WR841N V9.0 and all products will also limit firmware in the future.
Posted: Tue Nov 27, 2018 3:25 Post subject: Downgrade Factory firmware
Downgrade the factory firmware (TP-Link firmware) first. Then try to upgrade to dd-wrt, using the factory-to-ddwrt file. Use the US version if you are in the US, The EU version if you are in the EU, TW - Taiwan, nothing is everywhere else. This much match the TP-Link firmware that is currently on the router. For the factory-to-ddwrt file see the link in my signature, I would use the latest as of this post, 37837.
Also, if that fails, you can TFTP firmware over to the router as well (using a TFTP server running on your computer, at 192.168.0.66). Post here, if you need help with TFTP. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch