egc seems to have taken you through the whole thing... please see the following comments and try again. Check if it works. Else you will need to erase everything and start again.
logan111 wrote:
one issue I have us when I create a bridge I don't get the option to set a IP
In the new builds, you need to Scroll down to “Port Setup >> Network Configuration br1” to set the IP. This will appear only after you have added the bridge and done "Apply Settings" ... some routers may need a reboot.
logan111 wrote:
yes my router's IP is 192.168.1.1
Im testing on phone because pc doesnt have 5ghz
I do get an IP in the range
I selected channels and changed from mixed
and rebooted still no connection
logan111 wrote:
I can ping 172.217.17.142
but when i put it in web browser nothing comes up
Have you entered the following lines to your firewall?
iptables -I INPUT -i br1 -p udp --dport 53 -j ACCEPT
iptables -I INPUT -i br1 -p tcp --dport 53 -j ACCEPT
(edited above lines ... I had pasted the wrong line earlier)
You have mentioned somewhere that you are willing to pay to get this done. That is the easy method. The interesting method is to spend some time and learn. I agree the wiki is old and needs adaptation. I had gone through what you are going through now. Trust me ... the wiki is great. Only needs us to learn a little and adapt. and trust me again - it is easy peasy once you get a hang of it.
If you still face this problem, please make a post and I will try to edit my short notes so that you can just follow these from scratch. My notes are also based on the wiki, but with my adaptations for the current builds. _________________ PROFESSIONAL STUDENT my.Mistakes ∝ my.Learning ... provided I have the patience & persistence to learn
