Joined: 13 Nov 2017
|Posted: Mon Oct 01, 2018 16:21 Post subject: Enable BASE64 applet
In general complitations the BASE64 applet of Busybox isn't enabled.
To enable it, it's only required to add "CONFIG_BASE64=y" to the Busybox config file. This enables this applet with A VERY LOW FOOTPRINT. So even 4MB and micro firmwares can use it.
Please, consider it!
The code enabled is this:
Around +3KB (or less) in the final firmware, and useful to get binary data from the NVram.