Posted: Thu May 07, 2020 16:10 Post subject: New Build - 05/07/2020 - r43078 (r43084)
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware:6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs with r40564:40566.Workaround startup command: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas(there are a few alternatives: search)
• If start-up scripts do not work from USB add a delay e.g.: wait script or `sleep 25`
Important:
• If reporting issues provide applicable info: syslog output, 'dmesg', 'cat /tmp/var/log/messages', serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with any relevant configuration information.
Joined: 06 Feb 2020 Posts: 167 Location: Maharashtra, India
Posted: Thu May 07, 2020 16:50 Post subject:
Router/Version: Netgear R7000P
Firmware: DD-WRT v3.0-r43078 std (05/07/20)
Kernel: Linux 4.4.221 #44 SMP Thu May 7 10:46:01 +04 2020 armv7l
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r43028 std (04/29/20)
Status: Working Fine Temperatures: CPU 53.6 °C / WL0 46.5 °C / WL1 44.3 °C
No Syslog error except (seems for IP6) IP 6 is disabled in my setup -
user.err : usbipd: error: socket: :::3240: 97 (Address family not supported by protocol)
Note: as a novice a question - what does number in bracket indicate "New Build - 05/07/2020 - r43078 (r43084)" the build being 43078, what does r43084 informs?
Problems" none so far.
Reset: No
Mode: Gateway / AP
So far, no problems I did notice the router seems to have rebooted faster with this build. It's never really slow, but it seems to have become ready slightly quicker this time around. (Maybe it's just me.) I don't use USB, or any NAS features built into DDWRT. I prefer to use other dedicated devices for that on the network. With that said, I will update this post if things change.
Last edited by iFrog on Thu May 07, 2020 22:18; edited 1 time in total
Router/Version: Asus RT-N66U
File: v3.0-r43078 big (05/07/20)
Previous: r42954
Reset: Yes
Kernel: Linux 4.4.221 #689 Thu May 7 16:11:32 +04 2020 mips
Mode: Gateway
Status: Working
Issues/Errors: No errors
So far, so good -- wifi and ethernet are working again. The new Wireguard tunnel client settings are working as well. Yay!
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r43078 std (05/07/20)
Kernel Version: Linux 4.4.221 #44 SMP Thu May 7 10:46:01 +04 2020 armv7l
Reset: Yes
Previous: r43055
Mode: AP
Status: wifi 2.4ghz, openvpn client, usb and nas working; samba not working
Issue: the sys log gave these error messages:
ksmbd: [ksmbd-worker/1067]: ERROR: Can't open `/tmp/smb.db': No such file or directory
kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
ksmbd: [ksmbd-worker/1067]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
ksmbd: [ksmbd-worker/1743]: ERROR: Can't open `/tmp/smb.db': No such file or directory
[ksmbd-worker/1743]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
wsdd2[1739]: Terminated received.
ksmbd: [ksmbd-manager/1742]: ERROR: WARNING: child process exited abnormally: 1743
Router/Version: TP-Link Archer C9 v1
File/Kernel: Linux 4.4.221 #41 SMP Thu May 7 10:33:23 +04 2020 armv7l
Previous/Reset: r42910/no
Mode/Status: Router/AP/Gateway/Openvpn server/Wireguard server
Issues/Errors: usb "Run-on-mount Script" is not executed (wasn't either in 42910)
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43078 std (05/07/20)
Kernel: Linux 4.4.221 #39 SMP Wed May 6 10:01:36 +04 2020 armv7l
Previous: r43055
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.
Uptime: 3hrs 9min
Temperatures: CPU 61.4 °C / WL0 44.5 °C / WL1 50.5 °C
Joined: 16 Mar 2019 Posts: 426 Location: Szczecin, Poland EU
Posted: Fri May 08, 2020 0:46 Post subject:
Router/Version: Netgear WNR3500L v2
File/Kernel: dd-wrt.v24-43078_NEWD-2_K3.x_mega-WNR3500Lv2
Previous/Reset: r42954 version
Mode/Status: Internet gateway and WIFI AP
Issues/Errors: No boot correctly after update
I can't boot device after update to the newest version. The same situation is from version r43028. Last good working version is r42954 for this device. I don't known what is wrong. For test I'm rollback device to oem version and reflash with the newest version, but it not solve problem. Actually I'm stay with version from APR 20, 2020. The newest version and any other of r42954 provide me problem with device start. I have only orange Power LED and working switch. Router haven't internet connection. I haven't any access to device - GUI, SSH, tftp can't work. I'm repair device with USB - TTL cord and force tftp mode.
Joined: 08 May 2018 Posts: 16810 Location: Texas, USA
Posted: Fri May 08, 2020 0:51 Post subject:
thommy181 wrote:
Router/Version: Netgear WNR3500L v2
File/Kernel: dd-wrt.v24-43078_NEWD-2_K3.x_mega-WNR3500Lv2
Previous/Reset: r42954 version
Mode/Status: Internet gateway and WIFI AP
Issues/Errors: No boot correctly after update
I can't boot device after update to the newest version. The same situation is from version r43028. Last good working version is r42954 for this device. I don't known what is wrong. For test I'm rollback device to oem version and reflash with the newest version, but it not solve problem. Actually I'm stay with version from APR 20, 2020. The newest version and any other of r42954 provide me problem with device start. I have only orange Power LED and working switch. Router haven't internet connection. I haven't any access to device - GUI, SSH, tftp can't work. I'm repair device with USB - TTL cord and force tftp mode.
If you have a USB-TTL adapter, please provide serial logs of your unsuccessful flashes. This would be helpful to the community. Thank you.
EDIT: Attach them to your ticket when you re-open it. It serves NO purpose opening a ticket without this information. https://svn.dd-wrt.com/ticket/7094
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.221 #39 SMP Wed May 6 10:01:36 +04 2020 armv7l
Previous/Reset: 05-05-2020-r43055 / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: unable to connect to VLAN after upgrading. fixed by pressing Apply Settings button in Wireless>Basic Settings tab
- wl1 can connect to Arcadyan AC1900 (AP)
- PC can access the internet
- Phone can see VLAN wl1.1
- Phone is unable to connect to VLAN wl1.1
After pressing Apply Settings button in Wireless>Basic Settings tab (about May 8 19:30:51 in syslog): everything become normal
- wl1 reconnects to Arcadyan AC1900 (AP)
- PC can access the internet
- Phone can connect to VLAN wl1.1
I know that RB is not officially supported on Broadcomm routers, but this time is a bit different from previous FW upgrades, so I just post here in case someone encounters the same issue.
syslog.txt
Description:
whole log since after FW upgrade till problem fixed. May 8 19:30:51 is when Apply Settings button in Wireless>Basic Settings tab is pressed
